Infinita Lab
Search Close
Call (888) 878-3090Call Now Contact us

Introduction to Material Testing

Material testing is the basis of quality assurance, product development, as well as performance verification for all industries. Infinita Lab provides sophisticated Material Testing Services to examine metals, polymers, ceramics, composites, thin films, semiconductors, as well as nanomaterials at all stages of their life cycle, from material selection and design through design for manufacture verification and failure analysis.

Our facilities utilize advanced techniques such as OES, XRF, FTIR, SEM, DSC, TGA, and DMA to examine chemical composition, mechanics, heat stability, electric properties, and outdoor weatherability of materials. Tests meet global standards, help in optimizing production processes, and in formulating new products.

Key Material Testing Capabilities

  • Chemical Analysis: Confirms elemental and molecular composition, verifying purity, specification integrity, and process consistency.
  • Mechanical Testing: Tests for strength, elasticity, and endurance by tensile, compression, bending, hardness, fatigue, and impact tests.
  • Thermal & Environmental Testing: Tests heat, corrosion, humidity, and aging effects on material service life through thermal and environmental simulations.
  • Electrical & Optical Testing: Tests conductivity, dielectric strength, and optical characteristics for coatings, thin films, and semiconductors.
  • Failure Analysis & Root Cause Investigation: Finds defects with SEM, EDS, fractography, and micro-hardness testing to preclude recurrence and reliability improvement.
  • Product Reliability & Qualification Testing: Mimics in-service environmental exposures, including thermal cycling, vibration, and humidity stress, with the aim of extrapolating product life and durability.

By blending advanced instrumentation with scientific analysis, Infinita Lab provides practical answers, consistent results, and improved product performance, helping industries innovate with assurance and uphold the finest standards of quality.

Why Choose Infinita Lab for Material Testing?

Infinita Lab is a leading provider of Material Testing and streamlined material testing services, addressing the critical challenges faced by emerging businesses and established enterprises. With access to a vast network of over 2,000+ accredited partner labs across the United States, Infinita Lab ensures rapid, accurate, and cost-effective testing solutions. The company’s unique value proposition includes comprehensive project management, confidentiality assurance, and seamless communication through a Single Point of Contact (SPOC) model. By eliminating inefficiencies in traditional material testing workflows, Infinita Lab accelerates research and development (R&D) processes.

Looking for a trusted partner to achieve your research goals? Schedule a meeting with us, send us a request, or call us at (888) 878-3090  to learn more about our services and how we can support you. Request a Quote


3 Easy Steps to Start Testing

1
Share Your Testing Material Details with Us
2
Hassle-Free Collection Pick-Up Service
3
We Find the Lab, You Get the Results

ASTM D7490: Gas Pycnometry Testing — Complete Guide ASTM D903: Peel Adhesion Testing of Adhesive Bonds — Complete Guide ASTM E1820: Fracture Toughness Measurement — Complete Guide ASTM E928 Explained: DSC Purity Testing Procedures & Purpose ASTM E1269: Specific Heat Capacity by DSC — Method & Interpretation Guide Plasma Focused Ion Beam (P-FIB): How It Works & Applications FTIR Spectroscopy Explained: Principles, How It Works & Applications What Is SIMS (Secondary Ion Mass Spectrometry)? Principle & Applications What Is Electron Energy Loss Spectroscopy (EELS)? Principles & Applications What Is ICP-MS? Inductively Coupled Plasma Mass Spectrometry Explained GC-MS Analysis Explained: Principle, Applications & Chromatography-Mass Spectrometry ASTM E408: Total Normal Emittance Testing by Inspection Meter ASTM C177: Thermal Conductivity of Insulating Materials — Method Guide ASTM D1709 Dart Impact Testing Guide for Plastic Films ASTM D256 Izod Impact Resistance Testing Guide for Plastic Materials ASTM D4274 Polyol Hydroxyl Number Testing Guide for Polyurethane Raw Materials Emissivity & Its Types: Definition, Measurement & Material Applications Characterization Techniques for Thin Film Organic Coatings: Methods & Metrology Nanoscale Infrared Spectroscopy (nanoIR): Advanced Material Characterization Transmission Line Pulse (TLP) ESD Testing Guide for Semiconductors Field Emission SEM (FE-SEM) High-Resolution Surface Imaging Testing Combustion Ion Chromatography (CIC): Principle, Applications & Analytical Uses Plasma FIB (pFIB) Testing for Large-Area Cross-Section & Sample Preparation Precession Electron Diffraction (PED): Advanced Crystal Structure Analysis Aerospace Component Testing Procedures: Key Methods & Standards Bioremediation Approaches for PFAS: Innovative Solutions for Industry PFAS Removal Techniques: Comparative Analysis & Effective Solutions Electrochemical Treatment for PFAS: Methods, Effectiveness & Guide Understanding the Scanning Electron Microscope (SEM): How It Works & Applications ASTM D149 / IEC 60243 Dielectric Strength Testing for Electrical Insulation ASTM D150 Dielectric Constant & Dissipation Factor Testing for Electrical Insulation ASTM D257 Surface & Volume Resistivity Testing for Electrical Insulating Materials Differential Scanning Calorimetry (DSC) Testing Service ASTM D543 Chemical Resistance Testing for Plastics ASTM D1003 Haze & Luminous Transmittance Testing for Transparent Plastics ASTM D7234 Pull-Off Adhesion Strength Testing for Concrete Coatings ASTM E203 Moisture Testing by Volumetric Karl Fischer Titration ASTM E112 Average Grain Size Determination for Metals ASTM D1353 Nonvolatile Matter Testing in Volatile Solvents Non-Volatile Matter (NVM) Analysis: Methods, Standards & Applications BHAST (Biased Highly Accelerated Stress Testing) for Electronics Reliability ASTM E45: Determining Inclusion Content of Steel — Methods & Rating Guide ASTM C33 Concrete Aggregate Specification Testing ASTM D698 Standard Proctor Soil Compaction Testing ASTM D4603 Inherent Viscosity Testing for PET (Polyethylene Terephthalate) ASTM E407 Microetching Testing Practice for Metals & Alloys ASTM E562 Volume Fraction Testing by Systematic Manual Point Count Determining Modulus of Rupture of Tiles: Test Method & Standards Complete Guide to Peel Strength Testing: Angles, Methods & Standards ASTM D3172 Test for Proximate Analysis of Coal & Coke ASTM D4607 Iodine Number Testing for Activated Carbon Density of PVC Material: Comprehensive Guide to Values & Testing Tests for Functional Groups: Alcohols, Phenols & Organic Chemistry Methods The Essential Guide to Glass Testing: Key Properties & Methods Ceramics: From Construction to IoT — Material Properties & Testing Applications Cobalt-Free Batteries for EVs: Material Science, Chemistry & Testing EV Batteries 101: Mechanical Properties, Testing & Material Challenges Heavy Metals Lab Testing: A Comprehensive Handbook of Methods & Standards Emerging Materials & Technologies Shaping Aerospace: 2024 Guide What Is KIc? Fracture Toughness Explained Simply SST Gas Pipe Failure Analysis: Unveiling Root Causes — Case Study Materials Used in Vehicle Chassis & Body Components: Steel, Aluminum & Composites ASTM D3420 Plastic Film Pendulum Impact Resistance Testing Metal Hardness Testing Methods & Scales: Complete Reference Guide Phase Transformations in Alloys: Mechanisms, Microstructure & Testing ASTM D731: Flow Testing of Thermosetting Molding Compounds ASTM D1076 Rubber Latex Specification Testing How to Find a Heavy Metals Test: Labs, Methods & Compliance Standards What Is Heavy Metal Testing? Methods, Standards & Lab Services Explained What Is Materials Testing? Definition, Types, Methods & Industry Uses LIBS Material Analysis Microscope: How It Works & Applications Metal Forging Process & Testing Standards: A Practical Guide ASTM D1042 Linear Dimensional Change Testing for Plastics ASTM D1045: Testing Plasticizers in Plastics — Method Guide ASTM D790: Flexural Properties Testing of Unreinforced Plastics – Full Guide ASTM D1435 Outdoor Weathering Testing Guide for Plastics ASTM D3013: Epoxy Moulding Compounds — Standard Specification & Testing What Is Metallurgical Testing? Methods, Standards & Applications Heavy Metals Analysis Testing for Materials, Products & Environmental Samples ASTM D2115 Heat Stability Testing for PVC Compounds Benefits of Metal Testing for Manufacturing: Quality, Safety & Compliance ASTM D2765: Testing Crosslinked Polyethylene (XLPE) — Gel Content Guide ASTM D3465 Purity Testing for Monomeric Plasticizers ASTM D2839 Density Testing for Polyethylene Resins What Is a Fracture Toughness Test? Definition, KIc & Methods Guide Vickers Hardness Test: ISO 6507 & ASTM E384 Explained Non-Destructive Testing in Failure Analysis: When & How to Use NDT Foldable Smartphones: Evolution, Material Challenges & Reliability Testing EN 16094 Martindale Micro-Scratch Testing Guide for Surface Durability Li-Ion Battery Components: Testing Methods & Key Materials Guide ASTM D3350 Polyethylene Pipe & Fitting Material Classification Testing ASTM D3596 Gel Determination Testing in PVC Resins ASTM D3647 Testing for Plastic Pultruded Structural Shapes ASTM D2217 Soil Size Analysis & Determination of Soil Constants ASTM D2976 pH Testing for Peat Materials & Organic Soils ASTM D4647 Pinhole Test for Dispersive Clay Soil Identification ASTM D2287 Non-Rigid Vinyl Chloride Compound Specification Testing ASTM D2732 Unrestrained Linear Shrinkage Testing for Plastic Films ASTM D2647 Crosslinkable Polyethylene (XLPE) Specification Testing ASTM D2238 Polyethylene Absorbance (IR) Analysis Testing ASTM D2222 Methanol Extract Testing for Vinyl Chloride Resins ASTM D1786 Toluene Diisocyanate (TDI) Specification Testing ASTM D2103 Polyethylene Film & Sheeting Specification Testing ASTM D1505 Density Gradient Tube Testing for Plastics & Polymers ASTM D1248 Polyethylene Material Testing for Wire & Cable Applications ASTM D1201 Thermosetting Polyester Molding Compound Testing ASTM D1239 Chemical Extraction Testing for Plastic Films ASTM D792 Density & Relative Density Testing for Plastics ASTM D732 Punch Shear Strength Testing for Plastics & Sheets ASTM D705 Urea-Formaldehyde (UF) Molding Compound Testing ASTM D706 Cellulose Acetate Molding Compound Specification Testing ASTM D707 Cellulose Acetate Butyrate (CAB) Compound Testing ASTM D704 Melamine-Formaldehyde (MF) Molding Compound Testing ASTM D696 Linear Thermal Expansion (CTE) Testing for Plastics ASTM D635 Horizontal Burning Rate Testing for Plastics ASTM D648 Deflection Temperature Under Load (DTUL) Testing for Plastics ASTM D3591 PVC Content Testing in Formulated Compounds ASTM D5084 Hydraulic Conductivity Testing for Saturated Porous Materials ASTM D1784 Rigid & Chlorinated PVC Compound Testing & Classification ASTM D3675 Surface Flammability Testing for Flexible Cellular Materials ASTM D3364 Flow Rate (Melt Flow) Testing for Rigid PVC ASTM D3291 Plasticizer Content Testing in PVC Compounds ASTM D3124 Vinylidene Unsaturation Testing in Polyethylene Assessing Material Toughness: A Guide to ASTM D256 Izod/Charpy Impact Testing Orange Peel Coating Defect Analysis & Failure Investigation Refractive Index (RI) Testing Services for Optical Materials & Liquids Chain Failure Analysis: Root Causes, Fracture Modes & Testing Methods Component Failure Analysis: Significance, Methods & Industry Applications Fastener Failure Analysis: Causes, Fracture Modes & Testing Methods Material Failure Analysis: Root Cause Investigation Methods & Standards Mechanical Failure Analysis: Methods, Causes & Testing Services Metallurgical Failure Analysis: Methods, Fractography & Root Cause Testing SEM Failure Analysis: How Scanning Electron Microscopy Reveals Root Causes Failure Prevention Analysis Testing for Products & Components What Is Orange Peel? Coating Surface Defect — Causes & Prevention What Is Materials Engineering? Definition, Scope & Career Guide Hydrogen Embrittlement of Steel: Causes, Testing & Prevention Cracked Chuck Failure Analysis: Causes, Investigation & Prevention Precipitation Strengthening: Mechanism, Alloys & Metallurgical Testing Failure Mode & Mechanism Analysis Hydrogen Embrittlement Testing for Metals & Fasteners Epoxy Coating Selection & Failure Prevention: Testing, Properties & Best Practices Top-of-Line Corrosion (TLC) in Pipelines: Causes, Testing & Prevention Pre-Startup Corrosion Prevention and Hydrostatic Testing for Pipelines Discoloration & Color Change Analysis Testing for Coatings & Materials What Is Delamination & Adhesive Failure? Causes, Detection & Testing Adhesive Failure Analysis: Causes, Modes & Laboratory Testing Methods Polysiloxane (Silicone) Chemical Analysis Testing Services What Is Blooming? | Rubber & Plastic Surface Migration Guide Analysis of Additives in Coatings: Detection, Quantification & Testing Methods What Are Paint Craters? Causes, Identification & Prevention Nanoparticle Analysis & Characterization Testing Services Semiconductor Corrosion Analysis: Root Cause Investigation Methods Screw Failure Analysis: Common Failure Modes & Investigation Methods What Is Failure Analysis & Why Is It Significant? A Complete Guide Metal Corrosion Mechanisms: Types, Causes & Prevention Guide PVC Pipe Failure Analysis: Root Causes, Fracture Modes & Testing Methods Plastic Pipe Failure Analysis Services Materials Engineering for Cost Reduction: Testing-Driven Strategies Spring Failure Analysis Services for Mechanical & Precision Springs Phase Diagrams: How to Read Them & What They Reveal About Materials Aluminum Alloy Families: Properties, Designation & Testing Guide Atomic Layer Deposition (ALD) Coating Characterization & Testing Density Analysis Testing Services for Materials & Products Differential Scanning Calorimetry (DSC) for Engineers: Applications Guide Mercury Intrusion Porosimetry (MIP): Principle, Applications & Pore Analysis Capillary Flow Porometry: Pore Size Distribution Testing for Membranes & Filters What Is Nanoparticle Tracking Analysis (NTA)? Principles & Applications What Is Dynamic Light Scattering (DLS)? Principle, Applications & Limits Electric Sensing Zone (Coulter Principle): Particle Counting & Sizing Guide Single Particle Optical Sensing (SPOS): Principle, Applications & Particle Analysis What Is Laser Diffraction? Particle Size Measurement Principles & Guide What Is Karl Fischer Testing? Moisture Analysis Method & Applications What Is Eddy Current Testing? Principles, Applications & Standards How Magnetic Particle Inspection (MPI) Works: Step-by-Step Guide Liquid Penetrant Testing (LPT): How It Works, Standards & Applications Non-Destructive Testing (NDT): A Comprehensive Guide to Methods & Standards What Is Non-Destructive Testing (NDT)? Process, Types & Applications Types of Non-Destructive Testing (NDT): A Complete Guide to All Methods Optical Property Testing Services for Materials & Films Heavy Metals Testing Services for Products & Materials What Is a Heavy Metal Test? Methods, Detection Limits & Applications What Is Failure Analysis? Definition, Process & Methods Explained DTA vs DSC: Differential Thermal Analysis & Scanning Calorimetry for Plastics How Differential Scanning Calorimetry (DSC) Works: Principle & Testing Guide What Are Differential Scanning Calorimeters (DSC)? Types & How They Work Introduction to Peel Tests: Types, Standards & Adhesive Bond Measurement PEET Testing Methods: How Packaging Environmental Exposure Is Evaluated What Is a Fracture Test? Types, Methods & When to Use Them Fatigue Testing: A Comprehensive Guide to Methods, Standards & S-N Curves What Is Fatigue Testing? Methods, Standards, and Material Applications Creep Testing: A Comprehensive Guide to Methods, Standards & Material Behavior SEM-EDS Material Characterization: How It Works & What It Reveals Pitting & Crevice Corrosion Testing for Metals & Alloys Intergranular Corrosion (IGC) Testing Services for Stainless Steels & Alloys High-Pressure High-Temperature (HPHT) Testing for Polymers Galvanic Corrosion Testing in Metals: Methods, Standards & Prevention Methods for Electrochemical Corrosion Testing: Techniques & ASTM Standards Electrochemical Testing: Methods, Uses & Analytical Applications Electrochemical Corrosion Testing: Methods, Techniques & Applications Pitting & Crevice Corrosion Testing: Challenges, Methods & Solutions Corrosion Inhibitor Testing Services for Metals & Process Systems Grain Flow Testing & Analysis for Forgings & Wrought Metal Products Porosity Testing Methods for Metals: Archimedes, CT Scan & Metallography Ferrite Testing Across Industries: Applications & Measurement Methods Case Depth Determination: Methods, Standards & Hardness Profile Testing NMR (Nuclear Magnetic Resonance) Testing What Is Raman Spectroscopy? Principles, Applications & Guide What Is Mass Spectrometry? Principles, Types & Applications Guide Inductively Coupled Plasma (ICP): Principle, Instrumentation & Applications Physicochemical Analysis: Definition, Methods & Industrial Applications GPC Method for Determining Molecular Mass: Principles & Applications Molecular Weight Analysis of Polymers: Methods, Standards & Applications Chemical Recycling: A Guide to Processes, Testing & Standards Plastic Film Recyclability Testing: Methods, Standards & Compliance How Polystyrene Recycling Works: Process, Challenges & Testing How Is PET Recycled? Process, Testing & Recycled Content Guide Thermoplastic Properties for Industrial Applications: Testing & Selection Cross-Linked Polyethylene (PEX): Advantages, Applications & Material Testing What Is Cross-Linked Polyethylene (XLPE)? Properties, Types & Testing Monomers & Polymers: The Building Blocks of Modern Materials Plastic Injection Molding Process: How It Works & Quality Testing The Value of Plastic in Production: Properties, Testing & Innovation Fundamentals of Plastic Part Design for Injection Molding: A Guide Ertalyte (PET-P) Plastic: Machining, Precision & Material Property Testing How Insert Molding Works: Process, Benefits & Testing Guide Ocean Plastic Pollution: Overview, Data & Key Statistics Everything You Need to Know About Plastic Waste: Types, Impact & Testing LDPE Properties, Uses & Testing: Low-Density Polyethylene Guide DEHP & Phthalate Testing: Compliance Requirements & Test Methods Acrylic (PMMA): Everything You Need to Know About Properties & Testing Polycarbonate (PC): Material Properties, Applications & Testing Methods LLDPE Properties, Testing & Applications: Complete Guide PET vs Polyester: Material Comparison, Properties & Testing Guide Smart Composites: Integrating Sensors & Actuators — Testing & Characterization Polypropylene (PP) Testing: How Material Properties Impact Varied Applications Is Polypropylene Safe? Material Testing Insights & Chemical Properties Polypropylene (PP) Material Properties & Testing: Complete Guide Chemical Analysis of Plastics & Polymers: Methods & Testing Guide Metal Rapid Prototyping: 4 Methods Compared — Casting, CNC & AM Chemical Analysis of Polymers, Composites & Plastics: Methods & Services Outsourcing vs In-House Failure Analysis: Pros, Cons & Decision Guide Chemicals in Plastic Products: Testing, Regulations & Safety Guide Combustible Dust Testing & Validations: Explosion Parameters & Safety Standards Field Metallographic Replication (FMR) for In-Situ Microstructure Analysis Microstructural & Metallographic Analysis Services for Metals Condensate Testing Services for Power Plant & Process Systems Lubricating Grease Testing Services – NLGI, Worked Penetration & More What Is Immersion Testing? Chemical Resistance & Material Evaluation Failure Analysis Using Optical Emission Spectroscopy (OES) Scanning Electron Microscopy in Failure Analysis: Applications & Case Studies The Value of Non-Destructive Evaluation in Failure Analysis IC Failure Analysis Case Studies: Success Stories in Root Cause Investigation Electron Microscopy for Defect Analysis: Revealing Invisible Material Defects Failure Analysis Services: How to Choose the Right Expert Lab Failure Analysis Services: When to Get a Second Opinion & What to Expect Semiconductor Failure Analysis of Silicon Sensors: Methods & Insights RoHS Certification: Requirements, Testing & Compliance Guide Capacitor Failure Analysis: Techniques & Root Cause Investigation How the Scanning Electron Microscope Explores the Nanoscopic World FIB Failure Analysis Services: Focused Ion Beam Drilling Into Root Causes Avoid Electronic Failures with Energy Dispersive Spectroscopy (EDS/EDX) Stress Rupture & Creep Testing: What They Measure & When to Use Them Trace Metal Analysis: Methods, Importance & Industrial Applications Accelerated Intergranular Corrosion Testing: Standards, Methods & Alloy Applications RoHS Testing & Its Importance: What Engineers Need to Know Chemical Composition Testing Standards: Applications Across Industries Chemical Composition Testing: Methods, Standards & Material Verification Needleless Electrospinning: Process, Advantages & Industrial Scale-Up Angled Electrospinning: Technique, Applications & Fiber Alignment Vertical Top-Down Electrospinning: Process, Parameters & Applications Horizontal Electrospinning Guide – Process, Parameters & Applications What Is Electrospinning? Process, Nanofibers & Industrial Applications Components of Electrospinning: Equipment, Process & Nanofiber Production Reduce Charging in SEM Using Low Voltage Imaging: Techniques Guide ICP-OES Analysis: Features, Capabilities & Industrial Applications ICP-OES: Principle, How It Works & Analytical Applications What Is Fracture Toughness Testing? KIc, Methods & Applications Density-Neutron Log Porosity: How It Works & Geophysical Insights What Is Fatigue Testing? Definition, Types & Why It Matters Specimen Preparation for Fatigue Crack Growth Testing: ASTM E647 Guide Understanding a Failure Analysis Report: What to Look For & How to Read It Heat Treatment Testing Methods: Verification, Hardness & Microstructure Analysis How an FTIR Spectrometer Works: Components, Optics & Data Collection Non-Destructive Hardness Testing: Methods, Accuracy & Applications Charpy & Izod Impact Testing: Differences, Standards & Material Applications Metallography Basics: Specimen Preparation & Analysis Guide Impact Testing Procedures: Charpy, Izod & Drop Weight Methods Explained The Future of Metallographic Quality Control: Automation & AI Trends Inert Gas Fusion (IGF) Analysis: Oxygen, Nitrogen & Hydrogen in Metals Intergranular Attack (IGA): What It Is, Importance & Testing Methods Intergranular Oxidation (IGO) Testing for Carburized Steel Components Metallurgical Testing: Types, Methods & What to Expect from a Lab High-Cycle vs Low-Cycle Fatigue: Differences, Testing Methods & Standards The Importance of Test Frequency in Rubber & Polymer Dynamic Testing Measuring Thermal Conductivity of Thermal Interface Materials Using MTPS How MTPS Is Effective in Geothermal Research: Thermal Conductivity Guide Using Dynamic Mechanical Analysis to Evaluate Shoe Floor Friction Performance Using DMA to Find Glass Transition Temperature (Tg): Method & Examples Particle Distribution vs Dispersion in Thermal Adhesives: Key Differences Measuring Damping Performance Using a High-Frequency DMA: Method & Applications Why Measure Material Thermal Behavior? Importance & Applications Flatness Measurement in Metrology: Methods, Standards & Applications Heat Treatment Validation Testing for Metals & Alloys Aerospace Materials Testing: Mechanical, Chemical & Environmental Standards Micro-Raman Spectroscopy Testing for Molecular Identification & Stress Analysis EBSD Crystallographic Texture & Grain Orientation Testing Nuclear Magnetic Resonance (NMR) Spectroscopy Testing Services ICP-MS & ICP-OES Elemental Analysis Testing Services FTIR Spectroscopy Testing Services for Material Identification Chip Resistance Testing for Coatings: Methods, Standards & Automotive Applications Charpy Impact Resistance of Notched Plastic Specimens: ASTM D6110 & ISO 179 Damage Resistance Testing of Sandwich Constructions: Methods & Standards Falling Dart Impact Test: Method, Standards & Packaging Applications Multiaxial Impact Testing for Plastics & Composites Refractive Index of Transparent Organic Plastics: Test Method & Standards Dye Penetrant Testing (PT) Services for Surface Crack Detection Adhesion Strength Testing: Pull-Off, Peel & Lap Shear Methods Strain-Controlled Fatigue Testing for Metallic Materials Battery & Fuel Cell Membrane Analysis: Characterization Methods & Testing Corrosion & Humidity Testing Services for Materials & Products Thermomechanical Analysis (TMA) Testing Services for Materials Machining Performance of Ferrous Metals: Testing, Factors & Material Properties Pitting & Crevice Corrosion Resistance Guide for Stainless Steels Nonvolatile Matter in Volatile Solvents: ASTM D1353 Test Method Guide Metal Grain Size Determination Guide – ASTM E112 & Image Analysis Melting Points & Melting Range of Organic Chemicals: Testing Methods & Standards Antigenic Proteins in Hevea Natural Rubber: Detection & Testing Methods Flexural Toughness of Fiber-Reinforced Concrete: Testing & Standards Flexural Properties of Composite Materials: Testing Methods & ASTM D7264 Sandwich Panel Flexural Stiffness: Testing Methods & Calculation Guide Measuring Relative Viscosity of Polyamide: Methods, Standards & Molecular Weight Plastic Moisture Content Testing Services ISO 15512 Plastic Moisture Content Testing Services Residual Strain Measurements in Plastics: Methods & Implications ISO 6603 Puncture Impact Testing for Rigid Plastics ISO 7765 Dart Drop Impact Testing for Plastic Films ISO 1133 Melt Flow Rate (MFR) Testing for Thermoplastics Dimensional Stability: Definition, Test Methods & Why It Matters ASTM D1003: Haze & Luminous Transmittance Testing for Plastics Determining Hardenability of Steel: Jominy End-Quench Test & ASTM A255 Resistance of Glass Containers to Chemical Attack: Test Methods & Standards Internal Pressure Strength of Glass Containers: Testing Method & Standards Leeb Hardness Testing of Steel Products: Principle, Standards & Applications Coal & Charcoal Testing Services – Proximate, Ultimate & Calorific Value Failure Analysis Testing Services: What’s Included & How They Work GM9059P Corrosion Resistance Testing: Automotive Cyclic Corrosion Guide IEC 60243 Dielectric Breakdown Strength Testing Services ISO 180 Izod Impact Strength Testing for Plastics Oxygen Index Testing: What It Is, Method & Flame Retardancy Guide ASTM A561 Macroetch Testing for Tool Steel Bars ASTM A596 DC Magnetic Properties Testing Using Ballistic Method & Ring Specimens ASTM A604 Macroetch Testing for Consumable Electrode Remelted Steel ASTM A472 Heat Stability Testing for Steam Turbine Shafts & Rotor Forgings ASTM A348 AC Magnetic Properties Testing via 25 cm Epstein Frame ASTM A343 AC Magnetic Properties Testing at Power Frequencies – Epstein Frame ASTM A342 Magnetic Permeability Testing for Feebly Magnetic Materials ASTM A341 DC Magnetic Properties Testing by Permeameter & Ballistic Methods Effect of Liquids on Rubber Properties: Testing Methods & Standards Molding Shrinkage in Plastics: Causes, Measurement & Testing Standards Low & Ultra-Low Refractive Index Polymers: Properties, Applications & Testing Glass Sand: Properties, Testing & Quality Standards for Glass Manufacture Quenching Heat Treatment Methods: Types, Media & Testing Effects Common Mechanical Failures: Types, Causes & Investigation Methods Advanced Ceramics Testing & Properties: Key Methods & Standards Guide Tempered Glass: Properties, Testing Methods & Standards Guide Leeb Hardness Test: Advantages, Limitations & Field Testing Guide Fracture Toughness of Ceramics: Methods, KIc Testing & Standards Oxygen Transmission Rate (OTR) Testing Guide for Packaging Films Melt Flow Index (MFI) Testing: Definition, Standards & Polymer Processing ASTM D256 Izod & Charpy Impact Testing for Plastics ASTM D1929 Ignition Temperature Testing Guide for Plastics ASTM C177 Thermal Conductivity Testing by Guarded Hot Plate Nanosil & Nanosilica: Properties, Characterization & Applications Fluids & Fuel Testing Services for Petroleum & Specialty Liquids ASTM D7427 Latex Allergen Protein Testing in Natural Rubber Products ASTM D7426 Glass Transition Temperature (Tg) Testing for Polymers & Elastomers by DSC ASTM D5026 Dynamic Mechanical Analysis (DMA) Testing for Plastics in Tension ASTM E2714 Creep-Fatigue Testing for Metallic Materials Researchers Invent the Brightest Solid Ever: Optical Properties & Material Science ASTM D6671 Mixed-Mode Bending Fracture Toughness Testing for Composites Advantages of Optical Emission Spectroscopy (OES) Testing for Metal Analysis OES Common Uses & Testing Applications: Where Spark Spectroscopy Shines Gas Chromatography & GC-MS Applications: What Can GC-MS Analyze? Dimensional Stability Testing: Applications, Methods & Industry Standards Industrial Applications of Filler Content in Polymers: Testing & Analysis Common Filler Materials Used with Polymers: Types, Properties & Testing ASTM D4086 Visual Evaluation of Metamerism for Color Matching ASTM E841 Copper Determination in Iron Ores by Flame Atomic Absorption Heat Deflection Temperature (HDT) Testing: Uses, Methods & Industry Standards Industrial Applications of Dielectric Strength Testing: Where & Why ASTM D1149 Ozone Cracking & Deterioration Testing for Rubber ASTM A604 Macroetch Testing for VAR/ESR Consumable Electrode Remelted Steel ASTM D3588 Heating Value & Relative Density Testing for Gaseous Fuels ASTM D1945 Natural Gas Analysis by Gas Chromatography ASTM D629 Quantitative Fiber Analysis Testing for Textiles Cryo-FIB Testing for Frozen Hydrated Sample Cross-Sectioning ASTM D7132 Retained Blowing Agent Testing in Extruded Polystyrene Foam ASTM D7399 PP Content Testing in PP/LDPE Blends by Infrared Spectrophotometry ASTM D7398 Boiling Range Distribution Testing of FAME Biodiesel by GC ASTM C1360 Cyclic Fatigue Testing for Advanced Ceramics – Tension-Tension ASTM E1004 Electrical Conductivity Testing by Electromagnetic Eddy Current ASTM E945 Test to Determine Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry ASTM E930 Largest Grain (ALA Grain Size) Testing in Metallographic Sections ASTM E928 Purity Determination by DSC Testing Chromatography Testing Services: GC, HPLC & Ion Chromatography Analysis Common Uses of Thermal Expansion Testing: Applications & Standards Common Uses of Heat Aging Tests: Applications, Standards, and Industry Benefits Advantages of Heat Aging Tests for Material Reliability Assessment ISO 3251 Non-Volatile Matter (NVM) Content Testing Industrial Applications of Non-Volatile Matter (NVM) Testing ASTM D7468 Cummins ISM Engine Oil Performance Testing Common Uses of Failure Analysis: Industries, Benefits & Applications Advantages of Combustion Analysis for Elemental Testing in Materials Common Uses of Combustion Analysis: CHNS-O Testing & Material Applications Slow Crack Growth (SCG) Testing of Polymers: Methods & Standards Additives Used in Plastics: Types, Functions & Analytical Testing Methods Non-Volatile Residue (NVR) Gravimetric Testing Guide Humidity Test Chambers: How They Work, Standards & Applications ASTM D7449: Permittivity and Permeability of Materials at Microwave Frequencies ASTM D7457 Chloride Testing in Aromatic Hydrocarbons by Microcoulometry Types of Dielectric Strength Measurements: Methods & Standards Guide Adhesive Failure: Causes, Modes & Chemical Analysis Testing Methods Dielectric Constant Testing: Measurement Methods, Standards & Material Applications Differential Scanning Calorimetry (DSC) Testing Services Atomic Oxygen & LEO Space Environment Simulation Testing for Materials Oxygen Plasma Ashing: Process, Applications & Surface Preparation Testing Predictive Modeling of Carbon-Based Material Erosion by Atomic Oxygen ASTM A327 Impact Testing for Cast Iron ASTM E1090 Dicumyl Peroxide & Decomposition Product Testing in XLPE Resins ASTM A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels ASTM A34 Sampling & Procurement Testing for Magnetic Materials ASTM F326 Electronic Measurement Testing for Hydrogen Embrittlement ASTM D6862 90-Degree Peel Strength Testing for Adhesives ASTM D4338 Flexibility Testing for Supported Adhesive Films ASTM D7336 Static Energy Absorption Testing for Honeycomb Sandwich Core Materials ASTM D7332 Fastener Pull-Through Resistance Testing for FRP Composites Solvents & Chemical Intermediates: Properties, Analysis & Testing Methods Glycols & Engine Coolants: Chemical Properties, Testing & ASTM Standards Carbon Black Particle Size Distribution: Testing Methods & Analytical Standards Material Extraction Testing: Solvent, Soxhlet & Analytical Methods Extractables & Leachables Testing Guide for Medical & Pharmaceutical Products Permeation Testing: Gas, Vapor & Liquid Barrier Properties of Materials Karl Fischer Moisture Content Testing Services Rebound Testing: Methods, Standards & Material Applications Guide Volatile Loss Testing Using Activated Carbons: Methods & Applications Instrumented Impact Testing: Force-Displacement Data & Material Insights Load Deflection Testing: Heat Deflection Temperature & Thermal-Mechanical Behavior Electrical Properties of Flexible Cellular Materials: Testing & Applications Chemical Properties of Asphalts & Bitumen: Testing Methods & Standards Fractionation in Material Testing: Methods, Applications & Analysis Protective Clothing Testing: Methods, Standards, and Safety Compliance for PPE Materials Melt Flow Rate Testing for Polymers: Method, Standards & Quality Control Rapid Gas Decompression (RGD) Testing: Mechanism, Standards & Elastomer Selection Injection Mold Shrinkage: Thermal Causes, Measurement & Testing Methods Flexural Modulus: Definition, Testing Methods & Material Significance Rare Earth Elements: Analysis, Detection Methods & Material Testing Density Testing for Materials: Methods, Standards & Physical Property Analysis Low-Temperature Testing for Materials: Methods, Standards & Cryogenic Applications Linear Dimensional Change Testing: Thermal Expansion, Methods & Standards Flexural Testing: Methods, Specimens & Key Properties Measured Chemical Resistance of Materials: A Practical Guide to Testing & Selection Chemical Resistance Testing for Materials: Methods, Standards & Applications Fatigue Testing: Definition, Methods, S-N Curves & Applications Dynamic Testing for Rubber & Plastic Materials: DMA, Fatigue & Viscoelastic Testing Physical Properties of Polymers & Olefins: Testing Methods & Characterization Chemical Properties of Coal & Coke: Proximate, Ultimate & Calorific Analysis Alternative Fuels & Biofuels: Chemical Properties, Standards & Lab Testing Aviation Fuel Chemical Testing: Properties, ASTM Standards & Quality Control Gas Fuels for Power Generation: Chemical Analysis & Testing Standards Chemical Testing of Gas & Ethanol Fuels: Properties, Standards & Methods ASTM D3451: Testing Coating Powders — Method Guide & Applications ASTM D2247 Coating Water Resistance Testing Guide – 100% Humidity ASTM G154 QUV Fluorescent UV Accelerated Weathering Testing Pyrolysis Testing Guide – Methods, Applications & GC-MS Analysis Polymer Identification: FTIR, DSC & Spectroscopic Methods for Plastic ID Hydrocarbon Content Testing: Methods, Standards & Material Applications Top 20 Mining Materials Testing Methods for Ore & Mineral Analysis ASTM D1149 Rubber Ozone Resistance Testing Guide Ozone Resistance Testing for Rubber & Polymers: Standards & Methods Pressure Testing for Materials: Methods, Standards & Safety Compliance Fluid Contamination Testing for Hydraulic & Lubricant Systems Fire & Flammability Testing Services for Materials & Products Liquid Fuel Testing Services – Diesel, Gasoline & Aviation Fuel Contaminated Fuel Analysis: Detection Methods, Standards & Lab Testing Inductively Coupled Plasma (ICP): How It Works & Analytical Applications High-Pressure Calorimetry Testing & Measurement Services Moisture Resistance & Humidity Testing Services Wood Pellet, Biomass, RDF & Coal Testing: Methods & Standards Guide Halogen Content Testing: Methods, Standards & RoHS/REACH Compliance Thermal Analysis & Calorimetry Testing Services Specific Heat Capacity (Cp) Testing & Measurement Services Impurities Identification in Materials: Methods, Standards & Lab Testing ASTM D7280 Quinoline-Insoluble (QI) Content Testing in Tar & Pitch ASTM E457 Heat Transfer Rate Testing by Thermal Capacitance Slug Calorimeter Water Quality Testing Services for Industrial & Environmental Applications ASTM E422 Heat Flux Testing by Water-Cooled Calorimeter ASTM E411 Trace Carbonyl Compound Testing by DNPH Method ASTM E410 Moisture & Residue Testing in Liquid Chlorine Raw Material Characterization Screening: Methods & Laboratory Services Chemical Compounds Screening & Database: Methods, Tools & Testing Applications Immersion Testing: Chemical Resistance, Fluid Soak & Material Evaluation USP Plastics Physicochemical Testing for Medical & Pharmaceutical Applications ASTM E372 Calcium & Magnesium Testing in Magnesium-Ferrosilicon by EDTA Titration ASTM E367 Chemical Analysis Testing for Ferroniobium Gas Chromatography Testing: Principles, Applications & What GC Can Analyze ASTM E408 Total Normal Emittance Testing by Inspection Meter Technique ASTM E385 Oxygen Content Testing by 14 MeV Neutron Activation (Ceramics) ASTM E382 Crushing Strength Testing for Iron Ore Pellets ASTM C866 Filtration Rate Testing for Ceramic Whiteware Clays ASTM C837 Methylene Blue Index Testing for Clay ASTM C721 Particle Size Testing for Alumina & Silica Powders Top 20 Additive Manufacturing Testing Methods for 3D-Printed Parts ASTM C690 Particle Size Distribution Testing for Alumina & Quartz Powders ASTM D6814 Devulcanization Testing for Crumb Rubber by Crosslink Density ASTM D6790 Poisson’s Ratio Testing for Honeycomb Core Materials ASTM D6785 Lead Determination in Workplace Air by Flame AAS GC-MS Analysis Procedure Guide – Sample Prep, Method & Interpretation Physico-Chemical Properties Data Generation: Methods & Applications Adhesion Strength & Mechanical Failure: Testing Methods & Root Cause Analysis Chiral Analysis of Optical Isomers: Methods, Techniques & Lab Testing Detection of Flow-Accelerated Corrosion (FAC): Methods & Testing Services Water System Validation & Monitoring Services for Pharma & Biotech ASTM D6773 Schulze Ring Shear Testing for Bulk Solids Flow Properties ASTM D6762 Hiding Power Testing for Spray-Applied Paint Coatings ASTM D6746 Green Strength & Stress Relaxation Testing for Raw Rubber ASTM D6745 Linear Thermal Expansion Testing for Electrode Carbons ASTM D6739 pH Value Testing for Precipitated Silica ASTM D6735 Gaseous Chlorides & Fluorides Testing from Calcining Exhaust Sources ASTM D6734 Coliphage Detection Testing in Water ASTM D6595 Wear Metals Testing in Used Lubricating Oils ASTM D6584 Total Glycerides & Glycerin Testing in Biodiesel (FAME) ASTM D870 Water Resistance Testing for Coatings by Water Immersion ASTM D7213 Boiling Range Distribution Testing of Petroleum Distillates by GC ASTM D3677 Rubber Identification by Infrared Spectrophotometry ASTM C1217 Testing for Nuclear & Radioactive Material Processing Equipment ASTM D7169 Boiling Point Distribution Testing for Crude Oils by High-Temperature GC ASTM A976 Insulating Coating Testing for Electrical Steels ASTM F1160 Shear & Bending Fatigue Testing for Calcium Phosphate Coatings ASTM G46 Pitting Corrosion Examination & Evaluation Testing ASTM E385 Oxygen Content Testing by 14 MeV Neutron Activation ASTM E1587 Chemical Analysis Testing for Refined Nickel ASTM E1623 Fire & Thermal Parameters Testing Using ICAL Calorimeter ASTM E1618 Ignitable Liquid Residue Testing in Fire Debris by GC-MS ASTM E1616 Acetic Anhydride Analysis by Gas Chromatography ASTM E1613 Lead Determination Testing by ICP-AES ASTM E1600 Determination of Gold in Cyanide Solutions by Flame Atomic Absorption Spectrometry ASTM E1569 Oxygen Determination in Tantalum Powder by Inert Gas Fusion ASTM E1568 Gold Determination in Activated Carbon by Fire Assay ASTM E112: Standard Test Methods for Determining Average Grain Size ASTM E1090 Dicumyl Peroxide Content Testing in Crosslinked Resins ASTM D7025 Flax Fiber Fineness Testing Services ASTM D7025 Clean Flax Fiber Fineness Testing Services ASTM D6415 Curved Beam Strength Testing for Fiber Reinforced Composites ASTM D6395 Flatwise Flexural Impact Resistance Testing Coefficient of Thermal Expansion (CTE) for Metals: Values & Testing Guide Cooling Fluid vs Heating Fluid: Thermal Properties, Selection & Testing Cone Calorimeter Testing for Heat Release & Fire Hazard Assessment ASTM E1232 Temperature Limit of Flammability Testing for Chemicals ASTM E1228 Peroxy Ester Assay Testing – Catalyzed Iodometric Procedure ASTM D5800 Noack Evaporation Loss Testing for Lubricating Oils ASTM E1175 Solar & Photopic Reflectance, Transmittance & Absorption Testing ISO 75 Deflection Temperature Under Load (DTUL) Testing ASTM A123 Hot-Dip Galvanized Zinc Coating Testing for Iron & Steel ASTM F7 Aluminum Oxide Powder Specification Testing ASTM E1277 ICP Chemical Analysis of Zinc-5% Aluminum Mischmetal Alloys ASTM E1409 Oxygen & Nitrogen Testing in Titanium & Titanium Alloys ASTM E1461 Thermal Diffusivity Testing by the Flash Method (LFA) ICP-MS & ICP-OES Testing Guide – Methods, Applications & Differences ASTM E1447 Hydrogen Content Testing in Titanium & Titanium Alloys ASTM E1457 Creep Crack Growth Times & Rates Testing for Metals ASTM E1428 Antimicrobial Performance Evaluation Testing ASTM E1545 Glass Transition Temperature Testing by Thermomechanical Analysis (TMA) Phthalates Testing & Analysis in Plastics & Polymers ASTM E1521 Liquid Holding Capacity Testing for Granular Carriers ASTM E1520 Particle Count Testing for Granular Carriers Corrosion Testing Methods: Salt Spray, Immersion, Electrochemical & More Types of Thermal Testing: DSC, TGA, TMA, DMA & More Explained Root Cause Analysis (RCA): Methodologies, Tools & How to Apply Them Molecular Weight Determination Testing for Oils & Lubricants Chemical Analysis of Metals: Methods, Standards & Elemental Composition Testing LC-MS/MS (Liquid Chromatography-Tandem Mass Spectrometry) Testing Services ISO 1716 Gross Heat of Combustion Testing for Building Materials UL 1685 Smoke Release & Fire Testing for Electrical & Optical Fiber Cables 3-Point Flexure Testing for Plastic Materials – ASTM D790 / ISO 178 Dust Cloud Minimum Ignition Temperature (MIT) Testing for Combustible Dusts Dust Cloud Minimum Ignition Energy (MIE) Testing: Methods & ASTM E2019 Go/No-Go Dust Explosibility Screening Testing Services ASTM D6130 Silicon Determination by ICP-AES Testing ASTM D6129 Silicon Determination in Engine Coolant by Atomic Absorption ASTM D6128 Jenike Shear Cell Testing for Bulk Solids Flow Properties ASTM D6059 Airborne Single-Crystal Ceramic Whisker Concentration Testing ASTM D6071 Low-Level Sodium Testing in High-Purity Water by GFAAS ASTM D6068 J-R Curve Fracture Toughness Testing for Plastic Materials ASTM D6050 Insoluble Solids Determination in Organic Liquids MIL-STD-464 Electromagnetic Environmental Effects (E3) Testing Nickel Release Testing for Consumer Products & Jewelry Micro-FTIR Spectroscopy Testing for Microscale Material Identification PFAS (Per- and Polyfluoroalkyl Substances) Testing Services ASTM D6115 Fatigue Delamination Testing for Unidirectional Fiber Composites ASTM D6112 Compressive & Flexural Creep Testing for Plastic Lumber ASTM D6109 Flexural Properties Testing for Plastic Lumber & Shapes ASTM D7574 Bisphenol A (BPA) Testing in Environmental Waters by LC-MS/MS ASTM D6093 Non-Volatile Matter Volume Testing by Helium Pycnometer ASTM D6082 High-Temperature Foaming Testing for Lubricating Oils ASTM D6073 Relative Setting Testing for Heatset Printing Inks ASTM D6047 Comprehensive Rubber Testing Services ASTM D6041 Contact-Molded Fiberglass (GFRP) Specification Testing ASTM D6036 Groundwater Chemical Analysis Reporting & Display Guide ASTM D5994 Core Thickness Measurement for Textured Geomembranes Laser Profilometry Testing for Surface Geometry & Dimensional Measurement Flow-Accelerated Corrosion (FAC) Testing for Power & Process Piping Mechanical Testing of Steel & Metals: Tensile, Hardness & Impact Testing Dimensional Stability Testing: Methods, Standards & Material Applications Stress Optical Coefficient: Definition, Measurement & Applications Dielectric Strength Testing: Methods, Standards & Electrical Insulation Testing Optical Emission Spectroscopy (OES) Testing Laboratory Services Thermal Expansion (CTE) Testing Services for Materials & Components Polymer Dielectric Constant Reference Table: Values, Testing & Material Selection FTIR Analysis Testing Services: What to Expect & When to Use Them ISO 178 Flexural Testing: Specimen Size, Geometry & Test Conditions ISO 178 Plastics Flexural Properties Testing Services ASTM E1820 Fracture Toughness Testing – KIc, J-Integral & CTOD ASTM E1659-12 Method for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet ASTM E1640 Glass Transition Temperature Testing by DMA ASTM D6531 Relative Permittivity & Loss Index Testing for Organic Liquids ASTM D6480 Flexible Cellular Urethane Foam Specification Testing ASTM D6474 High-Temperature GPC of Polyolefins ASTM D4890 Polyurethane Foam Cup Test – Gel & Rise Time ASTM D4875 Polyurethane Foam Property Testing – Standard Terminology Reference ASTM D1042 Linear Dimensional Change Testing for Plastics ASTM D7133 Adhesive Lap Shear Strength Testing at Elevated Temperature Nanoindentation Testing: Principles, Applications & Hardness at the Nanoscale Substances of Very High Concern (SVHC): REACH Testing & Compliance Electrical Properties of Nanomaterials: Characterization & Testing Methods Refractometry & Refractive Index Testing Services Raman Spectroscopy Testing Services for Material Identification Pyrolysis GC-MS Testing for Polymer Identification & Characterization Nuclear Reaction Analysis (NRA) for Light Element Depth Profiling NMR Spectroscopy Testing for Molecular Structure & Polymer Analysis Nanoindentation Testing for Nano-Mechanical Properties of Materials MALDI-TOF Mass Spectrometry: Principles, Applications & Guide LIBS (Laser Induced Breakdown Spectroscopy) Testing for Rapid Elemental Analysis Laser Diffraction Particle Size Testing for Powders & Suspensions ASTM E794 Melting & Crystallization Temperature Testing by DSC ASTM E793 Enthalpy of Fusion Testing by DSC ASTM E644 Testing for Mining Drill Rods & Fittings ASTM E643 Ball Punch Deformation Testing for Metal Sheet & Strip ASTM E601 Chemical Analysis Testing for Ferrochromium-Silicon ASTM E595 Total Mass Loss & CVCM Outgassing Testing for Spacecraft Materials ASTM E576 Low-Temperature DSC Enthalpy Measurement Testing ASTM E537 Thermal Stability Testing for Chemicals by DSC ASTM E508 Chemical Analysis Testing for Ferrotungsten ASTM E502 Chemical Analysis Testing for Ferromolybdenum ASTM D6975 Engine Oil Oxidation Stability & Soot Dispersion Testing ASTM E463 Chemical Analysis Testing for Ferroboron ASTM D7093 Percent Volume Nonvolatile Content Testing for Coatings ASTM D7029 Carbon Black Aggregate Morphology Testing ASTM D7028 Glass Transition Temperature Testing for Epoxy by DMA ASTM D6943 Immersion Corrosion Testing for Metallic Materials ASTM D6905 Hot-Melt Adhesive Film Peel Testing ASTM D6903 Foaming Tendency Testing for Lubricating Oils ASTM D6875 In-Can Preservation Testing for Latex Paints ASTM D6866 Biobased Carbon Content Testing by Radiocarbon Analysis ASTM D6845 Release Force Testing for Adhesive Film Liners ASTM D6437 Polyurethane Raw Material & Foam Quality Testing ASTM D6226 Open Cell Content Testing for Rigid Cellular Plastics ASTM D6099 Ink Alkalinity Testing ASTM D5629 Isocyanate Functionality Testing for Polyurethane Applications ASTM D5523 Concentrated Horizontal Impact Testing for Packaging Systems ASTM D4889 Polyurethane Foam Raw Material Incoming QC Testing ASTM A105 Carbon Steel Forgings Testing ASTM D2000 Rubber Classification & Property Testing System ASTM D1557 Modified Proctor Soil Compaction Testing ASTM D3330 Peel Adhesion Testing for Pressure-Sensitive Tapes ASTM A677 Non-Oriented Electrical Steel Core Loss & Permeability Testing ASTM A683 Non-Oriented Electrical Steel Flat-Rolled Testing ASTM A276 Stainless Steel Bar & Shape Mechanical & Chemical Testing ASTM A967 Passivation Treatment Testing for Stainless Steel Structured Thermal Armor: Achieving Liquid Cooling Above 1000°C — Material Testing Artificial Synaptic Memory: Material Science, Chemical Properties & Testing Novel Catalysts for Propylene Production: Chemical Properties & Testing Mechanical Properties of Strange Metals: Metallurgy & Testing Insights Zeolite Nanotube Discovery: Properties, Characterization & Significance ASTM E351 Chemical Analysis Testing for Cast Iron ASTM E350 Chemical Analysis Testing for Carbon & Low-Alloy Steels ASTM E346 Methanol Analysis Testing for Purity & Composition ASTM E340 Macroetching Testing for Metals & Alloys ASTM E314 Manganese Determination Testing in Iron Ores ASTM E307 Normal Spectral Emittance Testing at Elevated Temperatures ASTM E258 Total Nitrogen Testing in Organic Materials by Modified Kjeldahl ASTM D6264 Quasi-Static Indentation Damage Resistance Testing for FRP Composites ASTM D6289 Mold Shrinkage Testing for Molded Thermosetting Plastics ASTM D6248 Vinyl & Trans Unsaturation Testing in Polyethylene by IR ASTM D6238 Total Oxygen Demand (TOD) Testing for Water ASTM D6209 Polycyclic Aromatic Hydrocarbon (PAH) Testing in Ambient Air ASTM D6208 Repassivation Potential Testing for Aluminum Alloys ASTM D6204 Unvulcanized Rubber Rheological Testing by Rotorless Shear Rheometer ASTM D6191 Formaldehyde Emission Testing from Water-Reducible Coatings ASTM C1300 Interferometric Thermal Expansion Testing for Glaze Frits ASTM C949 Porosity Testing in Vitreous Whitewares by Dye Penetration ASTM C849 Knoop Hardness Testing for Ceramic Whitewares ASTM C584 Specular Gloss Testing for Glazed Ceramic Whitewares ASTM C372 Thermal Expansion Testing for Porcelain Enamel & Glaze Frits by Dilatometer ASTM C370 Moisture Expansion Testing for Fired Ceramic Whitewares ASTM C1684 Flexural Strength Testing for Ceramic Cylindrical Rods at Ambient Temperature ASTM C1495 Surface Grinding Effect on Ceramic Flexure Strength Testing ASTM E2472 Stable Crack Extension Resistance Testing for Metals ASTM E1457 Creep Crack Growth Rate Testing for Metals ASTM E1221 Crack Arrest Fracture Toughness (KIa) Testing for Ferritic Steels ASTM E1304 Plane Strain Chevron Notch Fracture Toughness Testing for Metals ASTM E399 Plane-Strain Fracture Toughness (KIc) Testing for Metals ASTM E2760 Creep-Fatigue Crack Growth Testing for Metallic Materials ASTM E606 Strain-Controlled Low-Cycle Fatigue (LCF) Testing ASTM E9 Compression Testing for Metallic Materials at Room Temperature ASTM E292 Notch Tension Rupture Time Testing for Metallic Materials Spectroscopic Ellipsometry (SE) Guide – Principles & Applications ASTM E70 pH Testing for Aqueous Solutions by Glass Electrode ASTM D7786 Enamel Holdout Testing for Coating Systems ASTM D6186 Oxidation Induction Time (OIT) Testing for Lubricating Oils ASTM D6175 Radial Crush Strength Testing for Extruded Catalyst Carriers ASTM D6174 Inorganic Sulfate Testing in Surfactants by Potentiometric Titration ASTM D6159 Hydrocarbon Impurity Testing in Ethylene by Gas Chromatography ASTM D6133 Solvent Content Testing in Paints & Coatings ASTM D6144 Alpha-Methylstyrene (AMS) Analysis by Capillary GC ASTM D6143 Iron Content Testing in Bisphenol A (BPA) ASTM D6142 Analysis of Phenol by Capillary Gas Chromatography ASTM D6138 Corrosion Preventive Properties Testing for Lubricating Greases ASTM D5656 Stress-Strain Behavior Testing for Adhesives in Shear by Tension ASTM D3528 Double Lap Shear Strength Testing for Adhesive Joints ASTM D3310 Corrosivity Testing for Adhesive Materials ASTM D3167 Floating Roller Peel Resistance Testing for Adhesives ASTM D3166 Fatigue Properties Testing for Adhesives in Shear by Tension Loading ASTM D3165 Adhesive Shear Strength Testing by Tension Loading (Laminated Assemblies) ASTM E248 Manganese Determination in Manganese Ores ASTM E247 Silica Determination in Manganese & Iron Ores ASTM E246 Iron Determination Testing in Iron Ores & Related Materials ASTM E208 Nil Ductility Transition (NDT) Temperature Testing for Ferritic Steels ASTM E202 Analysis Testing for Ethylene & Propylene Glycols ASTM E222 Hydroxyl Group Content Testing for Chemicals ASTM E159 Hydrogen Loss Testing for Metal Powders (Co, Cu, W, Fe) ASTM E128 Maximum Pore Diameter & Permeability Testing for Rigid Porous Filters ASTM E82 Metal Crystal Orientation Testing ASTM E69 Combustible Properties Testing for Treated Wood by Fire Tube ASTM E53 Copper Determination in Unalloyed Copper by Gravimetry ASTM E37 Chemical Analysis Testing for Pig Lead ASTM D7912 Heat Aging Resistance Testing for Coatings & Finishes ASTM D7791 Uniaxial Fatigue Properties Testing for Plastics ASTM D7774 Flexural Fatigue Properties Testing for Plastics ASTM D7723 Filler Macro-Dispersion Testing in Polymer Compounds ASTM D7681 Glass Sphere Gradation Testing by Digital Image Analysis ASTM D7645 Insecticide Determination in Water by Liquid Chromatography ASTM D7617 Transverse Shear Strength Testing for FRP Composites ASTM D7599 Ethanolamine Determination in Water by Liquid Chromatography ASTM D7760 Hydraulic Conductivity Testing for Tire-Derived Materials ASTM D7734 Open Time Testing for Oxidative Printing Inks ASTM D2918 Durability Assessment of Peel-Stressed Adhesive Joints ASTM D1184 Flexural Strength Testing for Adhesive-Bonded Laminates ASTM D2557 Tensile Shear Strength Testing for Adhesives at Sub-Zero Temperatures ASTM D2293 Creep Properties Testing for Adhesives in Shear by Compression Loading ASTM D1876 T-Peel Resistance Testing for Adhesives ASTM D1781 Climbing Drum Peel Testing for Adhesive-Bonded Joints ASTM D1304 Electrical Insulation Testing for Adhesives ASTM D7191 Moisture Content Testing in Plastics by Relative Humidity ASTM D6645 Methyl Comonomer Content Testing in Polyethylene by IR ASTM D6042 Phenolic Antioxidant & Erucamide Slip Additive Testing in Polyolefins ASTM D5594 Vinyl Acetate Content Testing in EVA Copolymers ASTM D5296 Molecular Weight Distribution Testing for Polystyrene by GPC ASTM D5507 Trace Organic Impurity Testing in Vinyl Chloride Monomer ASTM D5227 Hexane Extractable Content Testing for Polyolefins ASTM D950 Impact Strength Testing for Adhesive Bonds ASTM D6325 Open Assembly Time of Carpet Mastic Adhesives ASTM D3983 Adhesive Strength & Shear Modulus Testing by Thick Adherend Tensile Test ASTM D1995 Multi-Modal Strength of Autohesives ASTM D4660 Toluene Diisocyanate (TDI) Isomer Content Testing ASTM D3768 Flexural Recovery Testing for Microcellular Urethanes ASTM D8280 Brominated Flame Retardant Blooming Testing by Ion Chromatography ASTM D3749 Vinyl Chloride Monomer determination in PVC by Gas Chromatographic Headspace technique ASTM A923 Detrimental Intermetallic Phase Testing for Duplex Stainless Steels ASTM D746 Brittleness Temperature Testing for Plastics & Rubber ASTM D4218 Carbon Black Content in Polyethylene ASTM D4001 Polymer Average Molecular Weight Testing by Light Scattering ASTM E2971 Boron-10 Areal Density Testing for Neutron Shielding Materials ASTM E1004 Electromagnetic Eddy Current Electrical Conductivity Testing ASTM E1922 Translaminar Fracture Toughness Testing for Polymer Matrix Composites ASTM E2899 Surface Crack Initiation Toughness Testing for Metals ASTM E1921 Reference Temperature (T0) Testing for Ferritic Steels ASTM E2948 Rotating Bending Fatigue Testing for Solid Round Fine Wire ASTM F76 Resistivity, Hall Coefficient & Mobility Testing for Semiconductors ASTM A1032 Hydrogen Embrittlement Resistance Testing for Steel Wire ASTM A1084 Detrimental Phase Detection in Lean Duplex & Ferritic Stainless Steels ASTM C326 Drying & Firing Shrinkage Testing for Ceramic Whiteware Clays ASTM F218 Optical Retardation & Stress Analysis Testing for Glass ASTM C323 Chemical Analysis Testing for Ceramic Clays ASTM C1494 C, N & O Mass Fraction Testing in Silicon Nitride Powder ASTM C1070 Alumina Particle Size Testing by Laser Light Scattering ASTM C730 Knoop Hardness Testing for Glass ASTM C729 Glass Density Testing by Sink-Float Comparator Method ASTM C693 Glass Density Testing by Buoyancy (Archimedes) Method ASTM C158 Modulus of Rupture Testing for Glass ASTM C1652 Optical Distortion Measurement in Flat Glass by Digital Photography ASTM C1421 Fracture Toughness Testing for Advanced Ceramics ASTM C1326 Knoop Hardness Testing for Advanced Ceramics ASTM C1211 Flexural Strength Testing for Advanced Ceramics at Elevated Temperatures ASTM C1198 Dynamic Elastic Properties Testing for Advanced Ceramics ASTM C1161 Flexural Strength Testing for Advanced Ceramics at Ambient Temperature ASTM D5452 Particulate Contamination in Aviation Fuels by Laboratory Filtration ASTM D3045 Heat Aging Without Load Testing for Plastics ASTM D522 Mandrel Bend Test of Attached Organic Coatings ASTM D3363 Pencil Hardness Testing for Coating Films ASTM G21 Fungal Resistance Testing for Synthetic Polymeric Materials ASTM D1494 Diffuse Light Transmission Factor Testing for Plastics ASTM D3273 Mold Growth Resistance Testing for Coatings & Building Materials ASTM D5895 Drying & Curing Time Testing for Organic Coating Films ASTM D5528 Mode I Interlaminar Fracture Toughness Testing for Composites ASTM D6742 Filled-Hole Tension & Compression Testing for Polymer Composites ASTM D1415 International Rubber Hardness (IRHD) Testing ASTM E110 Portable Rockwell & Brinell Hardness Testing for Metallic Materials ASTM C1674 Flexural Strength Testing of Porous Ceramics & Honeycombs ASTM C1341 Flexural Properties Testing for Ceramic Matrix Composites (CMC) Differential Hall Effect Metrology (DHEM) for Semiconductor Dopant Profiling Dilatometry Testing: Thermal Expansion Measurement & Material Characterization Electron Beam Induced Current (EBIC) Testing for Semiconductor Defects EBSD Crystallographic Texture & Grain Orientation Mapping EELS (Electron Energy Loss Spectroscopy) Testing for Elemental & Electronic Structure Evolved Gas Analysis (EGA) Testing for Thermal Decomposition Products Ellipsometry Testing for Thin Film Thickness & Optical Properties Emissivity Testing Services for Materials & Coatings GC-MS Chemical Identification & Quantification Testing Services GC-MS/MS Tandem Mass Spectrometry Testing Services Glow Discharge Mass Spectrometry (GDMS) Testing for Ultra-Trace Analysis LA-ICP-MS (Laser Ablation ICP-MS) Testing for Solid Sample Analysis Hydrogen Forward Scattering Spectrometry (HFS) Testing for H Depth Profiling Ion Chromatography (IC) Testing Services for Ionic Analysis ASTM C539 Linear Thermal Expansion Testing by Interferometric Method ASTM D2520 Complex Permittivity Testing for Solid Electrical Insulating Materials ASTM D2149 Dielectric Constant & Dissipation Factor Testing for Dielectrics ASTM F417: Modulus of Rupture (Flexural Strength) Testing for Electronic Ceramics ASTM C1505 Breaking Strength & Modulus of Rupture Testing for Tiles ASTM E2298 Instrumented Impact Testing of Metallic Materials ASTM A255: Steel Hardenability by Jominy End-Quench — Complete Guide ASTM C1901 Optical Retardation Testing for Flat Architectural Glass ASTM A956 Leeb Rebound Hardness Testing for Steel Products Photo-Induced Force Microscopy (PiFM) – Nanoscale IR Chemical Imaging Solid-State NMR Spectroscopy Guide for Materials Analysis Case Study: Helium Ion Microscopy Reveals Hydrogen Degradation in NBR Elastomer ASTM E1269 Specific Heat Capacity Testing by Differential Scanning Calorimetry (DSC) ASTM C1421 Ambient-Temperature Fracture Toughness Testing for Advanced Ceramics ASTM C1895 Mohs Scratch Hardness Testing for Ceramics & Minerals Infrared (IR/FTIR) Spectroscopy Testing – ASTM E1252, E168 ASTM E228 Linear Thermal Expansion Testing for Solids by Vitreous Silica Dilatometer ASTM D5712 Aqueous Extractable Protein Testing in Elastomers ASTM E324: Relative Initial and Final Melting Points of Organic Chemicals ASTM C1550 Flexural Toughness Testing for Fiber Reinforced Concrete ASTM D6272 Four-Point Flexural Testing for Polymer Matrix Composites ASTM D3985 Oxygen Transmission Rate (OTR) Testing for Packaging Films ASTM D4226 / D5420 Gardner Impact Testing for Coatings & Films ASTM D732 Shear Strength Testing for Plastics ASTM D4093 Residual Strain Measurement Testing for Plastics Multiaxial Impact Testing for Plastics – ASTM D3763 / D7192 / ISO 6603 ISO 15512: Moisture Content Testing in Plastics — Methods & Standards ASTM D789 / D4878 Relative Viscosity Testing for Polyamides (Nylon) ASTM D2584 Ignition Loss Testing for Cured Reinforced Resin Composites ASTM D955 Mold Shrinkage Testing for Thermoplastic Molding Materials ASTM D1204 Dimensional Stability Testing for Plastic Films & Sheeting ASTM D1238 / ISO 1133 Melt Flow Rate (MFR) Testing for Thermoplastics ASTM D635 Horizontal Burning Rate (HB) Flammability Testing for Plastics ASTM C273 Core Shear Testing for Sandwich Construction Materials ASTM D2863 Limiting Oxygen Index (LOI) Testing for Plastics & Textiles ASTM D471: Effect of Liquids on Rubber Properties — Complete Guide ASTM D2457 & D523 Specular Gloss Testing for Plastics & Coatings Case Study: HRTEM Imaging of ALD Thin Films at Atomic Resolution Case Study: Dielectric Properties of Al₂O₃ & AlN Ceramics at High Temperature & MHz Frequencies Case Study: PVC Pipe Degradation Analysis Using FTIR Spectroscopy ICP-MS (Inductively Coupled Plasma Mass Spectrometry) Testing Services Liquid Chromatography-Mass Spectrometry (LC-MS): Principles, Methods & Applications Optical Profilometry Testing for Surface Texture & Roughness Unveiling the Elemental Fingerprint of Particle Induced X-Ray Emission (PIXE) EDS (Energy Dispersive X-Ray Spectroscopy) Elemental Analysis Testing Corrosion Testing Techniques & Industrial Applications: A Complete Guide Eddy Current Testing (ECT) – Non-Destructive Inspection Services Volatile Organic Compounds (VOC) Analysis: Methods, Standards & Applications Root Cause Analysis (RCA) for Materials & Products: Process Guide Transmission Electron Microscopy (TEM) Analysis Services Coefficient of Friction (COF) Testing for Films, Packaging & Surfaces

Read Our Blogs and Research Papers

Physico-Chemical Properties Data Generation: Methods & Applications

Data Generation for Physico-Chemical Properties and Compliance

Physico-Chemical Properties Data Generation: Methods & Applications

Physicochemical property data generation is the systematic measurement of a substance’s fundamental physical and chemical characteristics—including melting point, boiling point,...

Read Article

DIN 75220 Solar Simulation Testing for Automotive Components

DIN 75220 Solar Simulation Testing for Automotive Components

DIN 75220 is a German norm for testing the ageing of automotive components under simulated solar radiation. Automotive components are...

Read Article

UL 263 Fire Resistance Testing for Building Construction

Heat transfer fluid sample being tested for thermal conductivity and specific heat capacity

UL 263 Fire Resistance Testing for Building Construction

UL 263 Fire Resistance Rating The UL 263 fire resistance rating test is a North American standard and is utilized...

Read Article
Where Quality Meets Trust
New Benchmarks in Quality Standards
New Benchmarks in Quality Standards

Empowering you to recognize and address inherent risks within your operations, supply chains, and quality management systems

Advanced Testing Services
Advanced Testing Services

Assessing the alignment of your products and services with, and their surpassing of, quality, safety, sustainability, and performance benchmarks.

100% Inspection Guarantee
100% Inspection Guarantee

Confirming the specifications, worth, and safety of your raw materials, products, and assets.

Certification
Certification

Officially verifying that your products and services adhere to both established external and internal standards.

Meet our Team

Best Industry Experts to Help You
Pradyumna Gupta
Expert in optics, materials engineering, and physical sciences. Ph.D. in Materials Science with specialization in glasses and thin films for electronic and photonic applications.

Pradyumna Gupta PhD, MBA

Vinay Vidyarthi
Seasoned engineering leader specializing in materials engineering with a focused background in semiconductor capital equipment hardware and process development. Subject matter expertise across multiple disciplines, including thin film fabrication by PVD, CVD, ALD, and plasma etching processes.

Vinay Vidyarthi  PhD

Dhairya Srivastava
Multidisciplinary experience in semiconductor processes, capital equipment design, factory automation, and software and controls development. M.S. in Mechanical Engineering, specializing in robotics and automation.

Dhairya Srivastava MBA

Rana Pratap
Experience in hardware design, cost optimization, and high-volume manufacturing operations. Ph.D. in Electrical and Computer Engineering with a minor in Industrial Engineering.

Rana Pratap PhD

Gautam Kumar
Expert in computational modeling, data sciences, and neural networks. Gautam holds a Ph.D. in Chemical Engineering with a specialization in process analysis and control.

Gautam Kumar PhD

Keisha Antoine
Specialization in semiconductor and battery materials, melt processes, and gas/glass chemical interactions. Keisha holds a Ph.D. in Materials Science and Engineering.

Keisha Antoine PhD

Animangsu Ghatak
Expert in mechanics of soft materials, adhesion, multiphase flow through micro and nanochannels, membrane-less fuel cell. He holds a Ph.D. in Chemical Engineering.

Animangsu Ghatak PhD

Sabyasachi Roy
Experience in processing of oxide ceramics, fuel cell, and other specialty materials. Sabyasachi earned his Master's in Materials Science with a specialization in Ceramic Processing Technologies.

Sabyasachi Roy  

Srinivas Mettu
Expert in a variety of fields, including thin film deposition, coating, material characterization, surface engineering, surface modification, and rheology. Ph.D. in Chemical Engineering.

Srinivas Mettu PhD

Shantanu Behera
Experience in batteries, semiconductors, thin-films, advanced ceramics using X-Ray spectroscopy, electron microscopy, thermal and optical methods. Ph.D. in Materials Science, specialization in Nanomaterials.

Shantanu Behera PhD

Show All Experts

Talk to Our Experts Today!

Submit your contact info and we’ll get back to you within 24 hours

    Home / Material Testing
    ×

    Talk to an Expert

      Connect Instantly

      (888) 878-3090
      Ensure Quality with the Widest Network of Accredited Labs
      • ddd
        Quick Turnaround and Hasslefree process
      • ddd
        Confidentiality Guarantee
      • ddd
        Free, No-obligation Consultation
      • ddd
        100% Customer Satisfaction

        ddd

        Start Material Testing