ASTM D3350: Polyethylene Pipe Fitting Material Testing Services
The categorization scheme for differentiating polyethene plastic pipe and fitting materials is described in depth in this ASTM D 3350 standard specification. To guarantee consistency and standardization in the identification of such components in the plastic pipe industry, it offers standards for categorizing these materials based on a cell categorization system.
TRUSTED BY
Get ASTM D116 compliant results — request your vitrified ceramic electrical testing quote
- Overview
- Scope, Applications, and Benefits
- Test Process
- Specifications
- Instrumentation
- Results and Deliverables
What Is ASTM D116 Vitrified Ceramic Electrical?
ASTM D3350 defines the classification and evaluation of polyethylene (PE) materials used in pipes and fittings. The standard establishes a cell classification system based on physical, mechanical, and environmental stress properties.
This method is widely used in piping systems for water, gas, and industrial applications. It ensures that polyethylene materials meet performance requirements for strength, durability, and long-term service conditions.
Applications and Benefits of ASTM D3350 Polyethylene Pipe Fitting Material Testing
Scope
ASTM D3350 evaluates polyethylene materials by assigning cell classifications based on key performance properties. The test ensures materials meet specifications for piping and fitting applications.
The test evaluates:
- Density and material composition
- Tensile strength and stiffness
- Environmental stress crack resistance (ESCR)
- Thermal stability and durability
- Material classification and grading
Applications
- Water distribution pipes
- Gas transmission pipelines
- Industrial piping systems
- Agricultural irrigation systems
- Plumbing and fittings
- Quality control in pipe manufacturing
Benefits
- Provides standardized material classification
- Ensures long-term durability and reliability
- Supports material selection and design
- Helps prevent failure under stress conditions
- Enables comparison of polyethylene grades
Our ASTM D3350 Testing Procedure
Sample Preparation
Polyethylene material samples are prepared or molded.
1Conditioning
Samples are conditioned under controlled conditions.
2Property Evaluation
Mechanical, thermal, and environmental properties are tested.
3Data Recording & Evaluation
Results are used to assign cell classification.
4ASTM D3350 Test Parameters and Requirements
| Parameter | Details |
|---|---|
| Applicable Materials | Polyethylene (PE) pipe and fitting materials |
| Density Range | ~0.93 to 0.97 g/cm³ |
| Tensile Strength | ~20 MPa to 35 MPa |
| ESCR Resistance | ESCR Resistance |
| Melt Index Range | ~0.05 to 1.0 g/10 min |
| Measured Outputs | Measured Outputs |
- Tensile testing machine
- Density measurement setup
- Environmental stress crack testing equipment
- Melt flow index tester
- Environmental conditioning chamber
- Data acquisition system
Equipment and Instrumentation Used for ASTM D3350 Testing
What You Receive: Test Report, Data, and Certification
- Material cell classification results
- Mechanical and environmental property data
- Stress crack resistance evaluation
- Performance assessment for piping applications
- Test condition summary
- ASTM compliance report
ASTM D3350 Polyethylene Pipe Fitting Material FAQs
ASTM D3350 provides classification for polyethylene materials used in pipes and fittings. It ensures consistent performance by defining requirements for strength, durability, and environmental resistance in fluid handling applications.
Key parameters include density, melt index, tensile strength, slow crack growth resistance, and environmental stress crack resistance. These properties define the material classification and performance characteristics for pipe applications.
The test provides classification using a cell system based on physical and mechanical properties. Results indicate suitability of polyethylene materials for pressure piping, fittings, and related applications.
ASTM D3350 applies to polyethylene materials used in pipes, fittings, and piping systems for water, gas, and industrial fluid transport applications requiring durability and long-term performance.
ASTM D3350 provides material classification but may not fully represent performance under all service conditions. Additional testing may be required for long-term durability, environmental exposure, or specific application requirements.
Why Choose Infinita Lab for Polyethylene Pipe Fitting Material Testing?
At the core of this breadth is our network of 2,000+ accredited laboratories across the USA, offering access to over 10,000 testing methods and analytical services. From advanced materials characterization (SEM, TEM, RBS, XPS) to mechanical, chemical, environmental, biological, and standardized ASTM/ISO-compliant testing, we deliver unmatched flexibility, specialization, and scale. You are never limited by geography, facility, or methodology — Infinita Lab connects you to the right expertise and testing solution, every time.
Need ASTM D3350 Polyethylene Pipe Fitting Material Testing You Can Rely On?
Send query us at hello@infinitalab.com or call us at (888) 878-3090 to learn more about our services and how we can support you.
Request a Quote
Submit your material details and receive testing procedures, pricing, and turnaround time within 24 hours.
Quick Turnaround and Hasslefree process
Confidentiality Guarantee
Free, No-obligation Consultation
100% Customer Satisfaction
