V-Notched Shear by ASTM D5379

ASTM D5379 is used to determine Shear of Composite Materials by the V-notched Beam Method. This information is used for study and development purposes concerning interply strength or composite material contrast.

Average 30% Cost
Savings
100% Confidentiality
Guarantee
Free, No-obligation
Consultation
100% Customer
Satisfaction

TRUSTED BY ENGINEERS FROM

Scope:

The ASTM D5379 test method is used to determine shear strain, shear stress, and shear modulus of plastic material. This test procedure deals with the shear properties of composite materials reinforced by high-modulus fibers. The composite materials may be continuous-fiber or discontinuous-fiber-reinforced type composites. The information can be used for study and development purposes concerning interply strength or composite material contrast.

Test Procedure:

A notched beam sample is mounted in a shear fixture for ASTM D5379 test. Strain gauges can be applied to both sides of the sample. This is done to ensure that shear and twisting do not occur but failure must occur by shear. A load is applied at a particular rate until the sample breaks down.

Specimen size:

The test samples are 76 X 11 mm at composite thickness with a V notch above and below the 11 mm dimension.

Data:

Shear Strain, Shear Stress/Ultimate Strength, Ultimate Strain and Shear Cord Modulus of elasticity.

Recently Searched by other expert

Materials Testing

ASTM E572 Analysis of Stainless and Alloy Steels by WDXRF

ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.

ASTM D2674 Analysis of Sulfochromate Etch Solution

The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.

Antigenic Protein in Hevea Natural Rubber ASTM D6499

An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.

ASTM Standards

ASTM G65 Abrasion Test Using the Dry Sand/Rubber Wheel Apparatus

ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.

ASTM E2141 Accelerated Aging of Electrochromic Devices in Sealed Glass Units

ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.

ASTM C724 Acid Resistance of Ceramic Decoration on Architectural Glass

ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.

Send us a request

Just share your testing requirements and leave the rest on us!

Free, no-obligation consultation
Guaranteed confidentiality
Quick turnaround time
Hassle-free process

Let us combine our capabilities to achieve success!!