ASTM E572-13 Analysis of steel alloys by fluorescence spectrometry

ASTM E572-13 involves the analysis of the stainless steel and alloys of steel by using wavelength dispersive X-ray fluor escence. This method is used for the determination of the elements like copper, manganese, silicon, sulfur, etc. The values stated in SI are considered standard.... Read More

Average 30% Cost
Savings
100% Confidentiality
Guarantee
Free, No-obligation
Consultation
100% Customer
Satisfaction

TRUSTED BY ENGINEERS FROM

Scope:

ASTM E572-13 test method is appropriate for quality control in the production process as well as ensuring that the product satisfies specifications. It performs multi-element determinations quickly and accurately enough to ensure product quality.

Procedure:

High energy X-rays are bombarded on the test specimen. Crystals distribute the secondary X-rays that are created. At specific wavelengths, suitable detectors measured the count rates. The detector’s outputs are counted in voltage pulses. Radiation measurements are done based on the amount of time it takes to reach a certain number of counts.

Specimen size:

All the test specimens and reference material should have a flat surface and diameter greater than 5.

Result:

In this way by performing ASTM A572-13, steel alloys are successfully analyzed by using fluorescence spectrometry.

Recently Searched by other expert

Materials Testing

ASTM E572 Analysis of Stainless and Alloy Steels by WDXRF

ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.

ASTM D2674 Analysis of Sulfochromate Etch Solution

The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.

Antigenic Protein in Hevea Natural Rubber ASTM D6499

An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.

ASTM Standards

ASTM G65 Abrasion Test Using the Dry Sand/Rubber Wheel Apparatus

ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.

ASTM E2141 Accelerated Aging of Electrochromic Devices in Sealed Glass Units

ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.

ASTM C724 Acid Resistance of Ceramic Decoration on Architectural Glass

ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.

Send us a request

Just share your testing requirements and leave the rest on us!

Quick Turnaround and Hasslefree process
Confidentiality Guarantee
Free, No-obligation Consultation
100% Customer Satisfaction

Let us combine our capabilities to achieve success!!