ASTM D5988: Plastic Aerobic Soil Biodegradation Testing Services
ASTM D5988-18 technique involves determining the degree and rate of aerobic biodegradation of plastic materials, including formulation additives, in contact with soil under laboratory circumstances. The values are considered as a standard when expressed in SI units.
TRUSTED BY
Get ASTM D5988 compliant results — request your plastic aerobic soil biodegradation testing quote
- Overview
- Scope, Applications, and Benefits
- Test Process
- Specifications
- Instrumentation
- Results and Deliverables
What Is ASTM D5988 Plastic Aerobic Soil Biodegradation?
ASTM D5988-18 evaluates the aerobic biodegradation of plastic materials in soil by measuring the conversion of carbon in the material into carbon dioxide under controlled conditions. It simulates natural soil environments to determine how effectively microorganisms break down plastics when exposed to oxygen, moisture, and microbial activity over time. This provides a realistic assessment of environmental degradation behavior.
The method is widely used to study the environmental impact of plastic materials, particularly biodegradable and compostable products. It helps manufacturers understand degradation rates, optimize formulations, and verify claims related to biodegradability. By generating quantitative data on CO₂ evolution, ASTM D5988 supports sustainable material development and ensures compliance with environmental performance expectations.
Applications and Benefits of ASTM D5988 Plastic Aerobic Soil Biodegradation Testing
Scope
ASTM D5988-18 covers the determination of aerobic biodegradation of plastic materials in soil through measurement of carbon dioxide evolution. It focuses on microbial degradation under controlled environmental conditions.
- Applicable to plastic materials in soil environments
- Measures aerobic biodegradation
- Uses CO₂ evolution as an indicator
- Simulates natural soil conditions
- Supports environmental performance evaluation
Applications
- Biodegradable plastic evaluation
- Environmental impact assessment
- Packaging material testing
- Agricultural film analysis
- Waste management studies
- Research and development of sustainable materials
- Regulatory compliance testing
Benefits
- Provides realistic biodegradation assessment
- Supports sustainable material development
- Verifies biodegradability claims
- Helps reduce environmental impact
- Enables material comparison
- Ensures compliance with environmental standards
Our ASTM D5988 Testing Procedure
Sample Preparation
Plastic specimens are prepared and mixed with biologically active soil under controlled conditions.
1Incubation Setup
Samples are placed in a controlled environment with regulated temperature, moisture, and oxygen supply.
2Biodegradation Monitoring
Microbial activity converts carbon in the material to CO₂, which is continuously measured.
3Data Evaluation
CO₂ evolution is analyzed to determine the percentage and rate of biodegradation.
4ASTM D5988 Test Parameters and Requirements
| Parameter | Details |
|---|---|
| Specimen Types | Solid plastics, films, powders, or molded pieces |
| Sample Preparation | Cut or ground into uniform small pieces for consistent microbial exposure |
| Test Environment | Natural soil containing active microorganisms, maintained aerobically |
| Typical Duration | Several weeks to several months |
| Measured Parameter | CO₂ evolution as a direct measure of biodegradation |
| Test Output | Biodegradation (%) calculated from carbon conversion to CO₂ |
| Microbial Activity | Natural soil microorganisms |
- Biodegradation test chambers
- CO₂ measurement system
- Incubation system with temperature control
- Moisture control setup
- Analytical balance
- Gas collection apparatus
- Data recording system
Equipment and Instrumentation Used for ASTM D5988 Testing
What You Receive: Test Report, Data, and Certification
- Percentage biodegradation
- CO₂ evolution profile
- Degradation rate analysis
- Environmental performance assessment
- Comparative material evaluation
- Detailed test report
ASTM D5988 Plastic Aerobic Soil Biodegradation FAQs
ASTM D5988-18 is important because it measures aerobic biodegradation in soil by tracking CO₂ evolution, providing realistic data on how plastics break down in natural environments. This helps validate biodegradability claims and supports development of environmentally responsible materials.
ASTM D5988-18 uses natural soil containing microorganisms along with controlled temperature, moisture, and oxygen levels to closely replicate real soil environments where biodegradation occurs.
A material showing significant CO₂ evolution (typically 60% or more conversion of organic carbon to CO₂) within the test period is generally considered to have good biodegradability under soil conditions.
ASTM D5988-18 results are influenced by soil composition, microbial activity, temperature, moisture content, and material properties, all of which affect degradation rates.
ASTM D5988-18 provides quantitative biodegradation data, enabling manufacturers to design materials that degrade efficiently and reduce environmental impact.
Why Choose Infinita Lab for Plastic Aerobic Soil Biodegradation Testing
At the core of this breadth is our network of 2,000+ accredited laboratories across the USA, offering access to over 10,000 testing methods and analytical services. From advanced materials characterization (SEM, TEM, RBS, XPS) to mechanical, chemical, environmental, biological, and standardized ASTM/ISO-compliant testing, we deliver unmatched flexibility, specialization, and scale. You are never limited by geography, facility, or methodology — Infinita Lab connects you to the right expertise and testing solution, every time.
Need ASTM D5988 Plastic Aerobic Soil Biodegradation Testing You Can Rely On?
Send query us at hello@infinitalab.com or call us at (888) 878-3090 to learn more about our services and how we can support you.
Request a Quote
Submit your material details and receive testing procedures, pricing, and turnaround time within 24 hours.
Quick Turnaround and Hasslefree process
Confidentiality Guarantee
Free, No-obligation Consultation
100% Customer Satisfaction
