(888) 878-3090
Conditions in the field that a container, package, or component of packaging can experience during distribution are simulated using conditioning packages. It is typical practice to condition subjects before transit simul ation tests. These variables are either intended to mimic specific environments during a product's distribution life or are ones that have historically been acceptable. Infinite Package Testing is an ISTA and ISO 17025-certified lab and is aware of the value of package integrity testing.... Read More
As the temperature and relative humidity vary, materials from containers and packages may experience changes in their physical characteristics. To accurately duplicate transit and simulation testing, packages are maintained in a predetermined conditional environment.
Products and packaging that are damaged during delivery must be replaced at a high expense. Several of those expenditures can be considerably decreased or eliminated with the right testing and certification. Keeping a competitive edge is essential in the dynamic world of business. Making sure your items satisfy timelines and expectations can help you achieve this.
You may reassure your customers that you are a dependable business that will deliver products that are fit to earn a profit by implementing package integrity testing as a normal procedure for your products.
A chamber is utilized as a workplace for the conditioning method to continuously maintain specific environmental conditions and properly record those conditions.
A hygrometer is also used to show the relative humidity. This device ought to be accurate to 2% humidity or less. Any measuring tool, like a thermometer, may give precise temperature readings to within 0.1 °C.
Our brand-new, cutting-edge testing facility for packages has environmental chambers up to 1,300 cubic feet, shakers up to 12 kg, and numerous compression/tensile testers. We provide full pack-out services as well as engineering advice. Our team communicates often throughout the entire process, from creating the test strategy to drafting the report.
Containers, packages, or packaging elements must be subjected to ASTM D4332 testing for at least 72 hours or until equilibrium is attained. All surfaces of the unit being tested are supported so that they can freely access the conditioning atmosphere.
A pallet or other device that allows for the maximum amount of exposure to the bottom may be used to support heavier packages.
A report is created after the package conditioning procedure described in ASTM D4332.
The chosen temperature and relative humidity. They need to be suitable for the handling and storage of the test specimen.
The specimen is then put inside the chamber and exposed to the conditions for a minimum of 4, 8, 16, 24, 48, or 72 hours, or for a period of one to four weeks, depending on the conditions. The top, sides, and at least 75% of the base must all be open to the test subject.
A report is then created using the information.
hello@infinitalab.com
Provide your contact information
Δ
ASTM B117 Salt Spray Test Procedure In ASTM B117 testing, the apparatus for the salt spray (fog) exposure includes a...
Scope: The developer determines an indicator's brightness to be applied. On the other hand, this approach substitutes filter paper for...
Scope: The standard method ASTM E238 describes the bearing yield strength and bearing strength of metallic materials. The data provided...
EELS analysis of gate and channel is performed on fin field-effect transistors (finFETs). Scanning transmission electron…
FTIR analysis is used to study the migration and leaching of phthalate plasticizers from p-PVCs. Phthalate…
Nano-scale surface roughness is a critical parameter in fabricated thin-films that are used in optics, solar…
Start Testing
ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.
ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.
ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.
Subscribe now to keep reading and get access to the full archive.
Type your email…
Subscribe
Continue reading
Start Material Testing
Contact Detail
Talk to Experts
Please provide few more details before we connect with you.
Full Name
What Material or product do you have?
What analysis do you need?
How many parts or coupons do you have?
How fast do you need the results back?
Submit