(888) 878-3090
Scope: ASTM D5994/D5994M covers all commercially available textured geomembranes deployed as manufactured geomembrane sheets. Many geomembranes have thickness as their basic index parameter for controlling and tracking their quality. Test Procedure: In ASTM D5994/D5994M, the core thickness of a textured geomembrane is determined as the average value of calculations taken on replicate specimens of the...
Scope: The standard method ASTM C241/C241M describes the testing of stones subjected to foot traffic using specified specimen pretreatment and apparatus test condition. The method is intended to test the abrasion resistance of various buildings and/or the comparison of the same type of stones. Test Procedure: In ASTM C241/C241M, the test specimens are conditioned by...
Scope: The standard method ASTM E238 describes the bearing yield strength and bearing strength of metallic materials. The data provided is significant for the comparison of materials and the design of structures. The test involves subjecting a load or strain to a metallic flat sheet material under a certain rate, and simultaneous measurement of the...
Scope: The standard practice of ASTM G151 describes the general procedure for testing conditions to observe nonmetallic material properties tested by accelerated devices that use laboratory light sources. A material’s relative performance can be compared from the results conducted in the accelerated exposure test in accordance with this standard method. Test Procedure: In ASTM G151,...
Glycol Concentration Testing Services Several different techniques are used for testing the concentration of glycol in solution but most frequently used techniques are explained below: Glycol is measured by measuring the refractive index. Light is passed through the solution, and the angle at which the light bends is recorded. This value is used to calculate...
Laser Profilometry Testing Services Laser Profilometry is a portable, non-destructive and non-contact characterization technique. Light laser profilometers are utilized in maintaining the quality during road constructions, large area surveys and are also used in all those projects which require accurate surface roughness. As it is used to measure the surface profile of the material to...
Ozone Testing Ozone testing is used to evaluate the performance of rubbers and elastomers in the presence of ozone (trioxygen and inorganic in nature) and to study the resistance of a particular material to ozone degradation. Rubbers/elastomers under strain are more vulnerable to the ozone attack. Automotive industries accommodate polymeric housing of engines and several...
Scope: ASTM E407 is a standard practice that gives the solutions and detailed procedure used for microscopic examination in etching metals and alloys.It also provides the safety precautions and miscellaneous information to be taken care of while microetching metals and alloys. Test Procedure: In ASTM E407 there are various procedures available for microetching the metals...
Scope: ASTM A247 is used as a reference to define concisely the graphite microstructure required. To permit accurate reporting of the microstructure and to give the comparison reports of cast iron microstructure, these standards are offered primarily by the investigators or labs. Test Procedure: In ASTM A247, there are two procedures, one generates the nodularity...
ASTM E1820-21 Standard test method for measurement of fracture toughness Scope: ASTM E1820-21 gives procedure and guidelines to determine the fracture toughness using K, J, and CTOD (d) parameters. Toughness is measured in the R-curve format or as a point value. Test Procedure: The Overall objective of this method is to develop a force-displacement record...
Scope: ASTM E1787-16 is used to determine anionic impurities in 50% Caustic Soda (Sodium hydroxide) and 50 % Caustic potash (Potassium hydroxide) solutions using ion chromatography (IC). Anions that can be determined at a concentration of 0.1 to 100 ppm include bromide, chlorate, chloride, fluoride, nitrate, phosphate, and sulfate. By varying sample size we can...
Scope: ASTM E1782-14 standard test method evaluates the vapour pressure of liquids using Differential Thermal Analysis (DTA) or Differential Scanning Calorimetry (DSC) techniques at different system pressures. This test method can be applied over a temperature range of 273 to 773 K and for 5 kPa to 2 MPa pressures. Test Procedure: In ASTM E1782-14...
Scope: ASTM E1735-19 test method covers determination of the relative image quality response of industrial radiographic film when exposed to X-radiation sources having photon energies from 4 to 25 MeV. Evaluation of the film is based on the visibility of holes in a special image quality indicator (IQI). It is essential to state the exposure...
Scope: ASTM E1740-22 is fire-test-response test method that covers determination of the ignitability and heat release rate of composites consisting of a wall covering or ceiling covering, a substrate, and all laminating adhesives, coatings, and finishes. Test Procedure: The ASTM E1740-22 test method is based on the observation that generally the net heat of combustion...
Scope: ASTM E1641-13 test method determines the kinetic parameters, Arrhenius activation energy, and pre exponential factor by thermogravimetry. ASTM E1641-13 test method is based on the assumption that the decomposition obeys first-order kinetics by using the Ozawa/Flynn/Wall conversational method. ASTM E1641-13 test method is generally applicable to materials with well-defined decomposition profiles occurring in the...
ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.
ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.
ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.
Δ
You share material and testing requirements with us
You ship your sample to us or arrange for us to pick it up.
We deliver the test report to your email.
Let’s work together!
Share your testing requirements with us and we will be happy to assist you.
What Material or product do you have?
What analysis do you need?
How many parts or coupons do you have?
How fast do you need the results back?
Do you know the goal of the analysis you need?
Contact Information
Start Testing
Name
E-mail
Contact number
Query
Submit