(888) 878-3090
Scope ASTM D6531 coloring strength is a fundamental property of printing ink scatterings. Even though outcomes on mass colors don’t ensure equivalency of dry printed films, they give valuable parameters for quality control of creating clusters of bases and completed inks. Test results may likely be utilized for shading coordinating purposes. Procedure In ASTM D6531...
Scope: ASTM D6834-02 test method estimates the ability of a pump dispenser to seal when the packaging is held under a vacuum. It evaluates the seal between the pump dispenser and the container neck. Test Procedure: In ASTM D6834-02 two methods performed for product leakage tests are (a) with vibration testing and (b) without vibration...
ASTM e1417 Scope: ASTM E1417-21e1 establishes the basic parameters for conducting the liquid penetrant method that is used to detect surface cracks or pores. This procedure sets the fundamental guidelines for regulating the use of the liquid penetrant method. This procedure is written in such a way that it can be mentioned in an engineering...
Scope: ASTM D3330-04 is used in quality control, to assure that the tape has the required peel adhesive value. This test can also evaluate the uniformity of the adhesion of given pressure-sensitive tape. ASTM D3330-04 can be used to determine the relative bond strength of a given tape to varied surfaces of different materials and...
Scope: The goal of the ASTM D7709 tests is to acquire accurate WVTR results that can be utilized to distinguish between different barrier packages for medicinal goods. Procedure: ASTM D7709 desiccant is poured into the bottle, which is then closed in the usual manner, including any membrane (tamper-evident or otherwise) sealed in place. The desiccant-filled...
Scope: The ASTM D7734/D7734M testing for printing inks is important as it is critical to know the stay open time when creating printing inks and overprint varnishes that dry predominantly by oxidation so that premature drying does not occur. Other components of a printing press include rollers and other components. Procedure: In ASTM D7734/D7734M, a...
Scope: The standard test method, Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration ASTM F3039, detects channel leaks through the seals of flexible barriers. This test is designed to detect leakage, components that exhibit any indication of leakage are rejected. This test does not measure the size of any channel leak...
Seal Strength of Flexible Barrier Materials ASTM F88 Scope: The ASTM F88 method covers the measurement of the strength of seals in flexible barrier materials. It is conducted on seals between a flexible material and a rigid material. Seals tested may be from any source, laboratory or commercial. ASTM F88 measures the force required to...
ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.
ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.
ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.
Δ
You share material and testing requirements with us
You ship your sample to us or arrange for us to pick it up.
We deliver the test report to your email.
Let’s work together!
Share your testing requirements with us and we will be happy to assist you.
What Material or product do you have?
What analysis do you need?
How many parts or coupons do you have?
How fast do you need the results back?
Do you know the goal of the analysis you need?
Contact Information
Start Testing
Name
E-mail
Contact number
Query
Submit