ASTM E738-11 Aluminum in Iron Ores by EDTA Complexometric Titrimetry

Scope: The ASTM E738-11 test method is used for analyzing iron ore concentrates and agglomerates and is primarily intended to serve as a referee method for ensuring that compositional parameters are met. Procedure: A mixed flux of sodium carbonate and sodium peroxide is employed to fuse the sample in a zirconium crucible. The fused mass...

Read More

ASTM E572-13 Analysis of steel alloys by fluorescence spectrometry

Scope: ASTM E572-13 test method is appropriate for quality control in the production process as well as ensuring that the product satisfies specifications. It performs multi-element determinations quickly and accurately enough to ensure product quality. Procedure: High energy X-rays are bombarded on the test specimen. Crystals distribute the secondary X-rays that are created. At specific...

Read More

ASTM E507 – 13 Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry

Scope: ASTM E 507-13 is considered as a referee method for compliance with compositional specifications for impurity content. It is often performed by trained analysts who perform common laboratory practices skillfully and safely. It is also expected that it is performed in a highly equipped laboratory, and a proper waste disposal system is to be...

Read More

ASTM D7093-13 Formability of thin-film organic coatings on Steel

Scope: The formability and adhesion of thin-film organic coatings applied over steel are determined using the ASTM D7093-13 standard test method. Coatings with a thickness of 2.5 to 10 microns are usually analyzed using this method. ASTM D7093-13 can be utilized for the determination or control of the manufacturing process. The method is useful for...

Read More

ASTM D7087-05a An Imaging Technique to Measure Rust Creepage at Scribe

Scope: Rust creepage areas at scribe on painted/coated on flat test panels caused by corrosive environment are measured using the ASTM D7087-05a standard test method. This method covers procedures involving the use of visual imaging software for identifying the area damaged by rust creepage at the scribe. ASTM D7087-05a is a simple and easy-to-use method....

Read More

ASTM A572/A572M-21 High-Strength Low-Alloy Columbium-Vanadium Structural Steel

Scope: ASTM A572/A572M-21 test method covers the properties of high-strength low-alloy columbium-vanadium structural steel. The method proceeds with the quality check, heat treatment, and the testing of the chemical composition of materials.  The results obtained from this method help in quality control, research, and performance evaluation of structural steel such as steel sheets (Figure 1)....

Read More

ASTM A709/A709M-21 Specification for Structural Steel for Bridges

Scope: ASTM A709/A709M-21 test method covers operations including decoiling, leveling or straightening, hot-forming or cold-forming, cutting to length, testing, inspection, conditioning, heat treatment, packaging, marking, loading for shipment, and certification. The results obtained from this method help in quality control, research, and performance evaluation of structural steel. The use of steel for constructing bridges and...

Read More

ASTM A105/A105M-21 Carbon Steel Forgings for Piping Applications

Scope: ASTM A105/A105M-21 test method covers the characteristics of steel forgings and steel bars. It determines their applications and specifications. The method proceeds with the quality check, heat treatment, and the testing of the chemical composition of materials.  The results obtained from this method help in quality control, research, and performance evaluation of steel forgings.  ...

Read More

ASTM A269/A269M-15a Seamless and Welded Austenitic Stainless Steel Tubing

Scope: ASTM A269/A269M-15a test method covers the use of stainless steel tubing for general corrosion-resisting and low or high-temperature service. The method helps determine the mechanical properties of stainless steel tubing. The results obtained from this method help in quality control, research, and performance evaluation of steel tubing.  Procedure: The specimen is manufactured as per...

Read More

ASTM A615/A615M-20 Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

Scope: ASTM A615/A615M-20 test method covers the properties of steel bars. Steel bars with alloy additives, such as those found in the Association for Iron and Steel Technology and Society of Automotive Engineers series of alloy steels, are allowed if the finished product fits all of the other specifications. The results obtained from this method...

Read More

ASTM A123/A123M-17 Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

Scope: ASTM A123/A123M-17 test method covers the exposure of iron and steel to galvanization. The coating properties of various materials are determined, and their application is decided. The results aid in the research, quality check, performance evaluation, and improvement of the materials. The method is intended to ensure effective performance and durability. Procedure: In ASTM...

Read More

ASTM A500/A500M-21a Cold-Formed Welded and Seamless Carbon Steel Structural Tubing

Scope: ASTM A500/A500M-21a test method covers the structural tubing and the use of cold-formed welded carbon and alloy steel tubing in it. The process proceeds with the quality check, heat treatment, and the testing chemical composition of materials. The results obtained from this method help in quality control, research, and performance evaluation of structural tubing....

Read More

ASTM A574M-12 Alloy Steel Socket-Head Cap Screws

Scope: ASTM A574M-12 test method covers the characteristics of steel alloys. The texture, imperfections, colorization, and presentation are focused. The process proceeds with the quality check, heat treatment, and testing of the chemical composition of materials. The results obtained from this method help in quality control, research, and performance evaluation of steel alloys. Procedure: The...

Read More

ASTM A182/A182M-21 Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

Overview of the Specification: Ordering Information  It is the purchaser’s responsibility to specify necessary information in the order to purchase the needed material. In addition to the ordering information guidelines in Specification A961/A961M, orders may include additional requirements. General Requirements  Products should conform to the requirements of Specification A961/A961M, including any supplementary requirements that are...

Read More

ASTM A677-16 Specification for Nonoriented Electrical Steel, Fully Processed Types

Scope: Electrical steel is usually manufactured in cold-rolled strips less than 2 mm thick. These strips are cut to shape to make laminations which are stacked together to form the laminated cores of transformers, and the stator and rotor of electric motors. Laminations may be cut to their finished shape by a punch and die...

Read More
Send us a request

    Process for testing
    •  

      STEP 01

      You share material and testing requirements with us

    •  

      STEP 02

      We ensure your sample pick-up in an ensured manner

    •  

      STEP 03

      We deliver test report to your inbox

      Let’s work together!

      Share your testing requirements with us and we will be happy to assist you.

      ddd Just share your testing requirements and leave the rest on us!
      • Free, no-obligation consultation
      • Guaranteed confidentiality
      • Quick turnaround time
      • Hassle-free process

        ddd

        Let us combine our capabilities to achieve success!!

          idea icon
          Want to connect with an expert before you leave?