ASTM A1084 Detecting Detrimental Phases in Lean Duplex Ferritic Stainless Steels

The goal of test method ASTM A1084 is to determine the existence of harmful chromium-containing phases in selected lean duplex stainless steels that substantially impact toughness or corrosion resistance. The values expressed in SI units should be considered standard.

  • Average 30% Cost
    Savings

  • 100% Confidentiality
    Guarantee

  • Free, No-obligation
    Consultation

  • 100% Customer
    Satisfaction

    TRUSTED BY ENGINEERS FROM

    Scope:

    There are three test methods in ASTM A1084 used for detecting the presence of detrimental phases in Lean Duplex Stainless Steels – The Etch method, the Charpy V-notch Impact Test, and the Inhibited Ferric Chloride Corrosion Test. These test methods are essential to reveal the presence or absence of a detrimental phase to the point where the material’s typical toughness and corrosion resistance are severely impaired.

    Test Procedure:

    Test methods in ASTM A1084Section
    Test method A6.1,6.2
    Test method B7.1-12.4
    Test method C13.1-19.5

    Result

    Based on the recorded corrosion rate in comparison to the established acceptance criteria, the ASTM A1084 test result is reported as passed or failed.

    Conclusion:

    The goal of test method ASTM A1084 is to determine the existence of harmful chromium-containing phases in selected lean duplex stainless steels that substantially impact toughness or corrosion resistance.

    OUR SERVICES

    Core Materials Testing Services

    Metrology

    A variety of microscopy and spectroscopy tools available for precise measurements from the nano to the meter scale.

    Metrology Testing Services POPULAR TESTS:

    TEM SIMS Profilometry

    Materials Testing

    ASTM and ISO standard and custom chemical, mechanical, thermal, corrosion tests, etc. for all materials metals, ceramic or polymers.

    Materials Testing Services POPULAR TESTS:

    Nondestructive Testing Electrical Testing Chemistry Analysis

    Product Testing

    Thousands of tests for product quality and reliability under heat, humidity, temperature shock, vibration, drop, electrostatic discharge.

    Product Testing Services POPULAR TESTS:

    Vibration Testing Humidity Testing Accelerated Aging

    Looking for Material Testing?

    We have already delivered 10000+ Material Test results to top companies

      Generic selectors
      Exact matches only
      Search in title
      Search in content
      Post Type Selectors
      Recently Searched by other expert
      Materials Testing
      ASTM E572 Analysis of Stainless and Alloy Steels by WDXRF

      ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.

      ASTM D2674 Analysis of Sulfochromate Etch Solution

      The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.

      Antigenic Protein in Hevea Natural Rubber ASTM D6499

      An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.

      ASTM Standards
      ASTM G65 Abrasion Test Using the Dry Sand/Rubber Wheel Apparatus

      ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.

      ASTM E2141 Accelerated Aging of Electrochromic Devices in Sealed Glass Units

      ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.

      ASTM C724 Acid Resistance of Ceramic Decoration on Architectural Glass

      ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.

      Send us a request

        Process for testing
        •  
          STEP 01

          You share material and testing requirements with us

        •  
          STEP 02

          You ship your sample to us or arrange for us to pick it up.

        •  
          STEP 03

          We deliver the test report to your email.

          Let’s work together!

          Share your testing requirements with us and we will be happy to assist you.

          ddd Just share your testing requirements and leave the rest on us!
          • Free, no-obligation consultation
          • Guaranteed confidentiality
          • Quick turnaround time
          • Hassle-free process

            ddd

            Let us combine our capabilities to achieve success!!

              idea icon
              Want to connect with an expert before you leave?