(888) 878-3090
Scope: ASTM E1725-19 test method covers fire-test-response that provides the information on the temperatures recorded on the electrical system component within a fire-resistive barrier system during the period of exposure. Test Procedure: In ASTM E1725-19, the average air temperature inside the fire-resistive barrier system at the beginning of the test is not less than 50°F...
Scope: ASTM E794 – 06 is useful for quality control, specification acceptance, and research. The fusion and crystallization temperatures of crystalline materials can be determined quickly using differential scanning calorimetry and differential thermal analysis. Procedure ASTM E794 – 06 entails heating a test specimen at a regulated rate through the fusion area in a controlled...
Scope: THE ASTM E576-08 test method can be used under real-world or simulated in-service situations. One side of the unit is exposed to room temperature and the other to natural or simulated weather conditions. Procedure: This test is carried out with the help of a unique apparatus that consists of two cold cylindrical metal blocks...
Scope: ASTM E285-08 test method covers the screening of ablative materials to determine the relative thermal insulation effectiveness. This test method is used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions. Test Procedure: In ASTM E285-08 test method, hot combustion gases are...
Scope: Electrical equipment such as wires, resistors, and other conductors, may overheat under certain conditions of operation or when they malfunction. Overheating can result in the ignition of the neighboring insulation material. ASTM D6194-18 test method evaluates the susceptibility of electrical insulating materials to ignition when exposed to a glowing wire. This test method determines...
Scope: ASTM D2520 is useful for specification acceptance, service evaluation, manufacturing control, and research and development of ceramics, glasses, and organic dielectric materials. Complex permittivity (dielectric constant and dissipation factor) is an important value used in designing transmission lines, resonators, antennas. Dielectric constant is the measure of the amount of potential energy stored due to...
ASTM C518 Steady-State Thermal Transmission Properties Scope: ASTM C518 is a quick way to determine Steady-State Thermal Transmission properties that guide the design and prototyping of electronic products. Steady-State Thermal Transmission properties of a material change with temperature change. It is important for designing electronics that dissipate fixed amounts of heat in a given time....
ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.
ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.
ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.
Δ
You share material and testing requirements with us
You ship your sample to us or arrange for us to pick it up.
We deliver the test report to your email.
Let’s work together!
Share your testing requirements with us and we will be happy to assist you.
What Material or product do you have?
What analysis do you need?
How many parts or coupons do you have?
How fast do you need the results back?
Do you know the goal of the analysis you need?
Contact Information
Start Testing
Name
E-mail
Contact number
Query
Submit