The chemical analysis of pig lead with various chemical compositions is covered in ASTM E37-05. This method is used to determine bismuth, copper, silver, zinc, and antimony in pig lead in different concentrations. The values expressed in SI units are considered standard.
Scope:
ASTM E37-05 is primarily intended to test such materials for compliance with compositional specifications. It is assumed that all who use these methods will be trained analysts capable of performing common laboratory procedures skillfully, and work will be performed in a properly equipped laboratory.
Procedure:
Test Methods
Sections
Copper, bismuth, silver, and zinc by the atomic absorption method
10-20
Antimony by the Rhodamine-B Photometric method
21-30
Specimen size:
The lines used are Cu 324.7, Bi 223.0, Ag 328.0, and Zn 213.8 nm, and photometric measurement is made at approximately 550.
ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 is a standard test method for the analysis of sulfochromate etches solution used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.
ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.
ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.
Send us a request
Process for testing
STEP 01
You share material and testing requirements with us
STEP 02
We ensure your sample pick-up in an ensured manner
STEP 03
We deliver test report to your inbox
Just share your testing requirements and leave the rest on us!