ASTM A109/A109M Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

Scope:

ASTM A109/A109M is highly significant in terms of determining specifications for Steel, Strip, Carbon, and Cold-Rolled carbon sheets. These specifications are then further used to conduct tolerance tests of carbon sheets. This test method is done by specialists under controlled conditions.

Procedure:

Steel is manufactured through two processes namely, the open-hearth process and the electric-furnace process. However, a cold-roll sheet is manufactured from either a hot-rolled descaled coil by cold reducing or by continuous casting steel with aluminium as a deoxidizer. In this way, carbon sheets are manufactured.

Video 01: Cold rolled steel coil

Specimen Size:

The cold-rolled strip is produced with a maximum specified carbon not exceeding 0.25 per cent.

Result:

In this way, by performing ASTM A109/A109M skillfully, specifications for steel, strip, carbon (0.25 Maximum Percent), and cold-Rolled can be measured.

Conclusion:

According to ASTM A109/109, specifications for steel, strip, carbon (0.25 Maximum Percent), and Cold-Rolled are necessary, which are further used in conducting different tests of the specimen.  Infinita Lab provides the best services in this regard.