(888) 878-3090
MICROSCOPIC ANALYSIS
Microscopic analysis is a powerful tool used to examine a variety of materials in research and industry. The most common forms of microscopic analysis are cellular plastics test and elemental analysis. The former is used to measure the size of foam cells in rigid cellular plastics and is conducted according to the ASTM D 3576 standard. The latter is often used to determine the elemental composition of a material and is conducted either through energy-dispersive X-ray (EDX) or through a Scanning Electron Microscope (SEM).
The EDX technique is a relatively quick and efficient way to obtain an elemental analysis of a material. It is a non-destructive method that allows for the analysis of a variety of sample types, including powders, thin films, liquids, and solids. EDX is often used in areas such as materials science, metallography, and industrial hygiene. The SEM method is a bit more involved but can provide a much more detailed analysis of a material. It is often used to examine a variety of properties such as microstructure, surface topography, particle size, and elemental composition. SEM is used in areas such as industrial quality control, failure analysis, and aerospace engineering.
Video 01: Microanalysis SEM/EDS
hello@infinitalab.com
How Spectral Ellipsometry (SE) works: Figure 1: Plarization of a light beam after passing through a polarizer Light waves can...
Perovskite solar cells Like other thin-film technologies, perovskite solar cells have unique properties that make them attractive for reasons beyond...
3D printed OLED Display Researchers successfully 3D printed a flexible OLED display. This could allow anyone to mass-produce low-cost OLED...
Δ
EELS analysis of gate and channel is performed on fin field-effect transistors (finFETs). Scanning transmission electron…
FTIR analysis is used to study the migration and leaching of phthalate plasticizers from p-PVCs. Phthalate…
Nano-scale surface roughness is a critical parameter in fabricated thin-films that are used in optics, solar…
Start Testing
ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.
ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.
ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.
Subscribe now to keep reading and get access to the full archive.
Type your email…
Subscribe
Continue reading
Start Material Testing
Contact Detail
Talk to Experts
Please provide few more details before we connect with you.
Full Name
What Material or product do you have?
What analysis do you need?
How many parts or coupons do you have?
How fast do you need the results back?
Submit