(888) 878-3090
ISO 180
ISO 180 is a standard that specifies the requirements and testing methods for measuring the impact strength of plastic materials. The test is used to determine how well a plastic material can resist impact or shock, which is an important factor in many applications, including automotive parts, packaging materials, and consumer goods.
The ISO 180 test involves striking a sample of plastic material with a pendulum hammer of a known weight and height and then measuring the energy required to break the sample. The test is conducted at different temperatures to determine the material’s impact strength over a range of conditions. The results of the test are reported as the energy required to break the sample, measured in Joules.
There are two variations of the ISO 180 test: the Izod impact test and the Charpy impact test. The Izod test involves striking the sample at a fixed distance from one end, while the Charpy test involves striking the sample at the center.
ISO 180 testing is an important tool for determining the quality and performance of plastic materials. The test results can be used to evaluate the suitability of a material for a specific application and to compare different materials for their impact strength. Manufacturers use these tests to ensure that their products meet the required specifications and to identify areas for improvement in the design and production process.
hello@infinitalab.com
How Spectral Ellipsometry (SE) works: Figure 1: Plarization of a light beam after passing through a polarizer Light waves can...
Perovskite solar cells Like other thin-film technologies, perovskite solar cells have unique properties that make them attractive for reasons beyond...
3D printed OLED Display Researchers successfully 3D printed a flexible OLED display. This could allow anyone to mass-produce low-cost OLED...
Δ
EELS analysis of gate and channel is performed on fin field-effect transistors (finFETs). Scanning transmission electron…
FTIR analysis is used to study the migration and leaching of phthalate plasticizers from p-PVCs. Phthalate…
Nano-scale surface roughness is a critical parameter in fabricated thin-films that are used in optics, solar…
Start Testing
ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.
ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.
ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.
Subscribe now to keep reading and get access to the full archive.
Type your email…
Subscribe
Continue reading
Start Material Testing
Contact Detail
Talk to Experts
Please provide few more details before we connect with you.
Full Name
What Material or product do you have?
What analysis do you need?
How many parts or coupons do you have?
How fast do you need the results back?
Submit