(888) 878-3090
COMPRESSION & DEFLECTION
Compression and deflection testing is a key component of many materials testing programs. The purpose of this testing is to determine the performance of materials under a range of compression forces and to measure the ability of the material to maintain its elastic properties after being subjected to a compressive force. Compressive forces can range from low to high, depending on the requirements set by the customer. The material thickness is measured before and after compression, and a force stress/strain curve can be recorded.
Compression stress relaxation (CSR) and continuous compression stress relaxation (CCSR) are two types of tests that are performed to measure the performance of a material over time when subjected to a compressive force. During CSR testing, the material is subjected to an applied load for a set period of time, and the force is monitored over the course of the test. CCSR testing involves continuously monitoring the force as the material is exposed to a compressive force over a longer period of time. Results from these tests can provide valuable insights into how a material will perform in various environments and under a range of compressive forces.
Video 01: Sponge Rubber Foam Compression Deflection Test
hello@infinitalab.com
How Spectral Ellipsometry (SE) works: Figure 1: Plarization of a light beam after passing through a polarizer Light waves can...
Perovskite solar cells Like other thin-film technologies, perovskite solar cells have unique properties that make them attractive for reasons beyond...
3D printed OLED Display Researchers successfully 3D printed a flexible OLED display. This could allow anyone to mass-produce low-cost OLED...
Δ
EELS analysis of gate and channel is performed on fin field-effect transistors (finFETs). Scanning transmission electron…
FTIR analysis is used to study the migration and leaching of phthalate plasticizers from p-PVCs. Phthalate…
Nano-scale surface roughness is a critical parameter in fabricated thin-films that are used in optics, solar…
Start Testing
ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.
ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.
ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.
Subscribe now to keep reading and get access to the full archive.
Type your email…
Subscribe
Continue reading
Start Material Testing
Contact Detail
Talk to Experts
Please provide few more details before we connect with you.
Full Name
What Material or product do you have?
What analysis do you need?
How many parts or coupons do you have?
How fast do you need the results back?
Submit