(888) 878-3090
AIR AGING
Air aging is a process of heat and oxidation that can cause changes to a material’s physical and chemical characteristics. This type of testing is done on rubber, latex, and plastic products to help understand how these goods will perform under certain conditions. The process involves exposing the material or product to high temperatures in an air oven.
The material is first tested for parameters such as tensile strength, hardness, specific gravity, and geometry. After the air aging process, the samples are tested again to see if the material’s physical and chemical characteristics have changed in any way. This type of testing is often done with the Standard Test Procedure for Rubber-Deterioration in an Air Oven for Air Aging as outlined by ASTM D 573.
Air aging is a valuable tool for measuring the performance of materials and products with high temperatures. It can be used to determine how a product or material will act in the field, and if the physical and chemical characteristics will change over time. This kind of testing is done in order to improve the quality of materials and products and ensure that they are able to withstand the conditions of their intended use.
Video 01: Hot Loop Air Aging
hello@infinitalab.com
How Spectral Ellipsometry (SE) works: Figure 1: Plarization of a light beam after passing through a polarizer Light waves can...
Perovskite solar cells Like other thin-film technologies, perovskite solar cells have unique properties that make them attractive for reasons beyond...
3D printed OLED Display Researchers successfully 3D printed a flexible OLED display. This could allow anyone to mass-produce low-cost OLED...
Δ
EELS analysis of gate and channel is performed on fin field-effect transistors (finFETs). Scanning transmission electron…
FTIR analysis is used to study the migration and leaching of phthalate plasticizers from p-PVCs. Phthalate…
Nano-scale surface roughness is a critical parameter in fabricated thin-films that are used in optics, solar…
Start Testing
ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.
ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.
ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.
Subscribe now to keep reading and get access to the full archive.
Type your email…
Subscribe
Continue reading
Start Material Testing
Contact Detail
Talk to Experts
Please provide few more details before we connect with you.
Full Name
What Material or product do you have?
What analysis do you need?
How many parts or coupons do you have?
How fast do you need the results back?
Submit