ASTM D7617/7617M Transverse Shear Strength of Fiber-Reinforced Polymer Matrix
ASTM D7617/7617M test method determines the properties of smooth round rods and textured bars by detecting their transverse shear strength. The use of rods and bars in concrete beams, concrete pavements, and wooden beams is studied. The final results of this test method are either expressed in SI units or inch-pound units.
TRUSTED BY
Precision-driven testing for dimensional accuracy and compliance
- Overview
- Scope, Applications, and Benefits
- Test Process
- Specifications
- Instrumentation
- Results and Deliverables
Overview
ASTM D7617/D7617M is a standardized test method created to measure the transverse shear strength of fiber-reinforced polymer matrix composites. This test method measures the material’s resistance to a perpendicular shear force.
The test procedure involves applying a controlled transverse shear load to the composite specimens until failure. The test results are used to quantify the material’s shear strength in MPa or psi. ASTM D7617/D7617M is widely used as a test standard in the aerospace, automotive, and construction sectors.
Scope, Applications, and Benefits
Scope
ASTM D7617/D7617M evaluates:
- Transverse shear strength of polymer rods and bars
- Failure modes (shear, delamination, matrix cracking)
- Load-bearing capability under shear forces
- Mechanical performance of fiber-reinforced composites
- Suitability for quality control and material certification
The method applies to smooth rods and textured bars made from fiber-reinforced polymer composites.
Applications
- Aerospace structural components
- Automotive composite parts
- Construction materials
- Quality control testing
- Research and development
- Material qualification
- Product design validation
Benefits
- Provides standardized shear strength data
- Supports material selection decisions
- Helps evaluate structural performance
- Identifies failure mechanisms
- Enhances product reliability
- Supports quality assurance programs
- Enables comparison of composite materials
Test Process
Specimen Preparation
Flat rectangular specimens or rods are prepared as per standard dimensions.
1Test Setup & Load Application
Specimens are mounted, and a uniform shear load is applied until failure.
2Measurement & Failure Observation
Load and deformation are recorded, and the failure mode is documented.
3Calculation & Result Reporting
Transverse shear strength is calculated, and results are reported.
4Technical Specifications
| Parameter | Details |
|---|---|
| Applicable Materials | Fiber-reinforced polymer composites |
| Specimen Type | Smooth rods and textured bars |
| Specimen Diameter | 6 mm to 25 mm |
| Loading Mode | Transverse shear |
| Output Units | MPa or psi |
Instrumentation Used for Testing
- Universal testing machine
- Transverse shear fixture
- Load cell
- Extensometer (if required)
- Alignment grips
- Data acquisition system
Results and Deliverables
- Transverse shear strength values
- Maximum failure load
- Stress-strain curves
- Failure mode description
- Comparative material performance
- Quality control documentation
Frequently Asked Questions
The transverse shear strength test determines the maximizing amount of shear strength the material can withstand before failing.
The test is usually used in fiber-reinforced polymer matrix composites, such as carbon fiber-reinforced polymers (CFRP), glass fiber-reinforced polymers (GFRP), and composite structures in aerospace, automotive, and construction industries.
Factors such as fiber orientation, matrix properties, fiber-matrix bonding, manufacturing process, and specimen geometry can all influence the material's transverse shear strength.
Yes, the test is suitable for all types of materials, depending on the material's properties and the test setup's specifics.
Case Studies
In-depth examination of genuine material testing solutions
Dopant and Ultra-Low Concentration Elemental Analysis Using STEM…
Dopant and Ultra-Low Concentration Elemental Analysis Using STEM…
Introduction to STEM-EELS for Elemental Analysis Scanning Transmission Electron Microscopy (STEM) combined with Electron Energy Loss...
Read Case StudyAnalysis of PVC Pipe Degradation Using FTIR Spectroscopy
Analysis of PVC Pipe Degradation Using FTIR Spectroscopy
PVC Pipe in Infrastructure — and Why Degradation Matters Polyvinyl chloride (PVC) pressure pipe is one...
Read Case StudyNano-scale roughness measurement of Si-wafers by Atomic Force…
Nano-scale roughness measurement of Si-wafers by Atomic Force…
Nano-scale surface roughness is a critical parameter in fabricated thin-films that are used in optics, solar...
Read Case Study
Request a Quote
Submit your material details and receive testing procedures, pricing, and turnaround time within 24 hours.
Quick Turnaround and Hasslefree process
Confidentiality Guarantee
Free, No-obligation Consultation
100% Customer Satisfaction
