Sand and Dust Testing

Testing for sand and dust compliance establishes the material’s resistance. Sand and dust blowing are frequently related to hot, dry settings. It can, however, be found seasonally in other parts of the world. Storms of sand and dust that occur naturally have a significant role in the formation of the substance.

We understand the significance of sand and dust lab testing as a certified environmental laboratory. It can be challenging to meet the criteria for sand and dust in the environment. We are aware of the difficulties and help businesses through them.

To get testing services that are customized to your particular needs, request a quote. To learn more about sand and dust environmental testing, get in touch with us.

Analyses of Sand and Dust Laboratory Tests

All mechanical, optical, and electronic equipment are assessed using the MIL-810 and RTCA DO-160 sand and dust test procedure assesses all mechanical, optical, and electronic equipment. Many different sectors can employ environmental sand and dust tests. This covers the industrial, commercial, and military sectors.

How is the test procedure carried out?

Four shakers and approximately twenty temperature, humidity, and sand and dust testing chambers are available in our lab. By expediting the testing procedure, we help manufacturers ensure that their products are compliant. Infinita Lab helps with troubleshooting in addition to performing expert testing.

The processes utilized in sand and/or dust testing are numerous and diverse. The blowing of sand dust or the blowing of sand particles are two techniques that are used. Particles less than 150 micrometers are called dust. Particles with a diameter of 150 to 850 micrometers are referred to as sand.

What features of sand and dust tests are typical?

Temperature – The test item is placed in high functioning and storage circumstances with a standard ambient temperature during the tests.

Relative Humidity – Excessive relative humidities might lead to dust particles caking. To prevent the test chamber RH from rising above 30%, it is controlled.

Decreased air velocity is utilized to stabilize temperatures, while higher air velocity is typical for desert regions. For standard testing, the test area is provided with constant wind speeds.

Duration: Typically, each susceptible face of the object being tested is subjected to sand and dust tests for a minimum of 90 minutes before being reoriented.

Why must I conduct sand and dust testing?

Equipment can suffer significantly in sand and dust environments. The penetration of the particles into cracks, fissures, and bearings is one of the negative outcomes. Particles may block apertures and filters, posing a fire risk owing to a lack of cooling or ventilation. Moreover, they could obstruct mats and moving parts. Among the harmful impacts of sand and dust are:

• Weight gain, and balancing of static and dynamic forces.
• Transmission of the signal is attenuated.
• Decrease in heat transfer.
• Surface abrasion and erosion.

Testing for sand and dust compliance establishes the material’s resistance. Sand and dust blowing are frequently related to hot, dry settings. It can, however, be found seasonally in other parts of the world. Storms of sand and dust that occur naturally have a significant role in the formation of the substance.

We understand the significance of sand and dust lab testing as a certified environmental laboratory. It can be challenging to meet the criteria for sand and dust in the environment. We are aware of the difficulties and help businesses through them.

To get testing services that are customized to your particular needs, request a quote. To learn more about sand and dust environmental testing, get in touch with us.

Analyses of Sand and Dust Laboratory Tests

All mechanical, optical, and electronic equipment are assessed using the MIL-810 and RTCA DO-160 sand and dust test procedure assesses all mechanical, optical, and electronic equipment. Many different sectors can employ environmental sand and dust tests. This covers the industrial, commercial, and military sectors.

How is the test procedure carried out?

Four shakers and approximately twenty temperature, humidity, and sand and dust testing chambers are available in our lab. By expediting the testing procedure, we help manufacturers ensure that their products are compliant. Infinita Lab helps with troubleshooting in addition to performing expert testing.

The processes utilized in sand and/or dust testing are numerous and diverse. The blowing of sand dust or the blowing of sand particles are two techniques that are used. Particles less than 150 micrometers are called dust. Particles with a diameter of 150 to 850 micrometers are referred to as sand.

What features of sand and dust tests are typical?

Temperature – The test item is placed in high functioning and storage circumstances with a standard ambient temperature during the tests.

Relative Humidity – Excessive relative humidities might lead to dust particles caking. To prevent the test chamber RH from rising above 30%, it is controlled.

Decreased air velocity is utilized to stabilize temperatures, while higher air velocity is typical for desert regions. For standard testing, the test area is provided with constant wind speeds.

Duration: Typically, each susceptible face of the object being tested is subjected to sand and dust tests for a minimum of 90 minutes before being reoriented.

Read more: ASTM G65 Dry Sand Abrasion Testing

Why must I conduct sand and dust testing?

Equipment can suffer significantly in sand and dust environments. The penetration of the particles into cracks, fissures, and bearings is one of the negative outcomes. Particles may block apertures and filters, posing a fire risk owing to a lack of cooling or ventilation. Moreover, they could obstruct mats and moving parts. Among the harmful impacts of sand and dust are:

• Weight gain, and balancing of static and dynamic forces.
• Transmission of the signal is attenuated.
• Decrease in heat transfer.
• Surface abrasion and erosion.

Video 01: Introduction to Dust Testing (Sand and Dust) – Ingress Protection (IP) Testing