Eddy Current Testing – ECT
Eddy current testing is a non-destructive material examination technique frequently used to detect near-surface defects of conductive materials. Surface inspection and tube inspection are the two main uses of eddy current testing. A change in eddy current and a corresponding change in phase and amplitude are caused by variations in physical properties, such as the electrical conductivity and magnetic permeability of the test object, as well as the presence of defects. These variations can be identified by measuring the impedance changes in the coil and can be seen on an instrument's screen.
TRUSTED BY
Precision-driven testing for dimensional accuracy and compliance
- Overview
- Scope, Applications, and Benefits
- Test Process
- Specifications
- Instrumentation
- Results and Deliverables
Overview
Eddy Current Testing, or ECT, is a non-destructive method for detecting surface and near-surface defects in conductive metal materials. Eddy Current Testing works by the induction of an alternating electric current, creating a magnetic field within the metal material under inspection.
The presence of cracks, corrosion, or other alterations in the metal, such as thickness or material composition, affects the eddy currents, thus creating an alteration in the electric currents within the probe. This alteration is then picked up by the testing equipment, enabling the detection of flaws within the metal.
ECT is a popular method for testing metal materials in industries such as aerospace, automotive, and energy.
Scope, Applications, and Benefits
Scope
Eddy Current Testing (ECT) is a non-destructive technique for testing electrically conductive materials. ECT is one of the more popular methods in various industries, including aerospace, automotive, power generation, and manufacturing.
ECT can be applied to various types of electrically conductive materials, which are:
– Ferrous metals
– Non-ferrous metals
– Aluminium alloys
– Copper alloys
– Titanium alloys
– Stainless steel components
Applications
- Aircraft structure inspection
- Heat exchanger and condenser tube inspection
- Weld inspection in conductive materials
- Corrosion detection in pipelines
- Quality control in metal manufacturing
- Automotive component inspection
- Coating and plating thickness measurement
- Detection of fatigue cracks in structural components
- Inspection of conductive plates, rods, and wires
Benefits
- Non-destructive and non-invasive testing
- Rapid inspection with minimal preparation
- High sensitivity to small surface defects
- Suitable for complex shapes and thin materials
- Provides immediate inspection results
- Portable equipment for field testing
- Capable of automated inspection systems
- Detects both structural and material property changes
Test Process
Probe Placement
The eddy current probe carrying alternating current is placed near the test surface.
1Magnetic Field & Eddy Current Generation
The coil generates a changing magnetic field that induces eddy currents in the conductive material.
2Defect Interaction
Cracks, corrosion, or thickness changes disturb the eddy current flow.
3Signal Detection & Analysis
Changes in probe impedance are measured and analysed to identify defects.
4Technical Specifications
| Parameter | Details |
|---|---|
| Applicable Materials | Electrically conductive metals and alloys |
| Detection Capability | Surface and near-surface defects |
| Inspection Depth | Typically up to a few millimetres depending on frequency and material properties |
| Output Format | Signal amplitude, phase shift, impedance variations |
| Inspection Type | Qualitative and quantitative analysis |
Instrumentation Used for Testing
- Eddy current flaw detector
- Eddy current probes and coils
- Signal generator
- Impedance analyzer
- Calibration reference standards
- Data acquisition system
- Computer-based analysis software
Results and Deliverables
- Detection of surface and near-surface cracks
- Identification of corrosion or material degradation
- Coating thickness measurements
- Material conductivity evaluation
- Inspection reports with signal interpretation
- Reports
Why Choose Infinita Lab for Eddy Current Testing?
Infinita Lab is a trusted USA-based testing laboratory offering Eddy Current testing services across an extensive network of accredited facilities across the USA.
Infinita Lab is built to serve the full spectrum of modern testing needs—across industries, materials, and methodologies. Our advanced equipment and expert professionals deliver highly accurate and prompt test results, helping businesses achieve quality compliance and product reliability.
Looking for a trusted partner to achieve your research goals? Schedule a meeting with us, send us a request, or call us at (888) 878-3090 to learn more about our services and how we can support you. Request a Quote
Frequently Asked Questions
Eddy Current Testing is a non-destructive testing (NDT) method used to detect surface and near-surface defects in electrically conductive materials by inducing electromagnetic currents and analyzing changes in probe impedance.
ECT can only be applied to electrically conductive materials such as aluminium, copper, titanium, stainless steel, and other metallic alloys.
Eddy Current Testing can detect surface cracks, near-surface flaws, corrosion, material thinning, coating thickness variations, and changes in electrical conductivity.
No. ECT is a completely non-destructive testing method, meaning the material or component being tested remains undamaged after inspection.
ECT is most effective for detecting surface and near-surface defects. The inspection depth typically ranges from a few microns to a few millimetres depending on the test frequency and material properties.
Case Studies
In-depth examination of genuine material testing solutions
Dopant and Ultra-Low Concentration Elemental Analysis Using STEM…
Dopant and Ultra-Low Concentration Elemental Analysis Using STEM…
Introduction to STEM-EELS for Elemental Analysis Scanning Transmission Electron Microscopy (STEM) combined with Electron Energy Loss...
Read Case StudyAnalysis of PVC Pipe Degradation Using FTIR Spectroscopy
Analysis of PVC Pipe Degradation Using FTIR Spectroscopy
PVC Pipe in Infrastructure — and Why Degradation Matters Polyvinyl chloride (PVC) pressure pipe is one...
Read Case StudyNano-scale roughness measurement of Si-wafers by Atomic Force…
Nano-scale roughness measurement of Si-wafers by Atomic Force…
Nano-scale surface roughness is a critical parameter in fabricated thin-films that are used in optics, solar...
Read Case Study
Request a Quote
Submit your material details and receive testing procedures, pricing, and turnaround time within 24 hours.
Quick Turnaround and Hasslefree process
Confidentiality Guarantee
Free, No-obligation Consultation
100% Customer Satisfaction
