ISO 75: Heat Deflection Temperature (HDT) Testing for Plastics
ISO-75 test method provides details about the plastic products by determining the deflection temperature under load in specific environmental conditions. This method is particularly for fiber-reinforced plastics. The final results of this test method are expressed in inch-pound units or SI units.
TRUSTED BY
Precision-driven testing for dimensional accuracy and compliance
- Overview
- Scope, Applications, and Benefits
- Test Process
- Specifications
- Instrumentation
- Results and Deliverables
Overview
ISO 75 is the standard test procedure to determine the heat deflection temperature of plastic materials. The test procedure evaluates the ability of a plastic specimen to withstand deformation when subjected to a specific load at higher temperatures.
The test procedure involves the observation of flexural and compressive properties by applying a constant load as the temperature increases. The temperature at which the specimen undergoes a specific amount of deflection is measured as the Heat Deflection Temperature (HDT). The results of this test procedure are essential in material selection, product design, research, and quality control of plastic components.
Scope, Applications, and Benefits
Scope
ISO 75 applies to:
- Thermoplastics
- Thermosetting plastics
- Reinforced and filled plastics
- Rigid plastic materials
It defines:
- Standard specimen dimensions
- Test conditions and heating rates
- Loading configurations (flexural method)
- Deflection measurement criteria
The method determines the temperature at which a standard deflection occurs under a specified bending stress.
Applications
- Material selection for high-temperature applications
- Quality control of molded plastic parts
- Product development and validation
- Automotive components
- Electrical and electronic housings
- Industrial equipment parts
- Consumer goods
- Research and development of polymer materials
Benefits
- Determines heat resistance under load
- Assesses dimensional stability at elevated temperatures
- Supports product performance evaluation
- Assists in material comparison and specification
- Ensures consistency in manufacturing
- Provides standardized data for design engineers
- Enhances durability and reliability assessment
Test Process
Specimen Preparation & Setup
Prepare standard test specimens (ISO 75) and assemble the HDT testing apparatus.
1Specimen Placement & Load Application
Place the specimen in a three-point bending setup and apply the specified flexural load.
2Controlled Heating & Deflection Monitoring
Increase temperature at a standard rate while continuously measuring deflection.
3HDT Determination
Record the temperature at which the specified deflection is reached as the Heat Deflection Temperature (HDT).
4Technical Specifications
| Parameter | Details |
|---|---|
| Applicable Materials | Thermoplastics, thermosets, reinforced plastics |
| Specimen Length | Typically up to 7.5 mm thickness (as per requirement) |
| Loading Type | Flexural loading (three-point bending) |
| Measured Property | Heat Deflection Temperature (HDT) |
| Output Units | Temperature (°C) |
Instrumentation Used for Testing
- HDT testing apparatus
- Loading system with calibrated weights
- Three-point bending fixture
- Heating bath or temperature-controlled chamber
- Micrometres or digital displacement gauges
- Temperature sensors
- Specimen measuring tools
- Data acquisition system
Results and Deliverables
- Heat Deflection Temperature (°C)
- Flexural stress calculation
- Compressive strength evaluation (if applicable)
- Material performance comparison
- Test report with environmental conditions
Frequently Asked Questions
Case Studies
In-depth examination of genuine material testing solutions
Dopant and Ultra-Low Concentration Elemental Analysis Using STEM…
Dopant and Ultra-Low Concentration Elemental Analysis Using STEM…
Introduction to STEM-EELS for Elemental Analysis Scanning Transmission Electron Microscopy (STEM) combined with Electron Energy Loss...
Read Case StudyAnalysis of PVC Pipe Degradation Using FTIR Spectroscopy
Analysis of PVC Pipe Degradation Using FTIR Spectroscopy
PVC Pipe in Infrastructure — and Why Degradation Matters Polyvinyl chloride (PVC) pressure pipe is one...
Read Case StudyNano-scale roughness measurement of Si-wafers by Atomic Force…
Nano-scale roughness measurement of Si-wafers by Atomic Force…
Nano-scale surface roughness is a critical parameter in fabricated thin-films that are used in optics, solar...
Read Case Study
Request a Quote
Submit your material details and receive testing procedures, pricing, and turnaround time within 24 hours.
Quick Turnaround and Hasslefree process
Confidentiality Guarantee
Free, No-obligation Consultation
100% Customer Satisfaction
