ASTM D6905-03 Impact Flexibility of Organic Coatings

ASTM D6905-03 is the standard test method to determine the flexibility of organic coatings. The ability of a film coating to resist impact and its consequences such as cracks are analyzed using this practice. The values are reported in SI units.

Average 30% Cost
Savings
100% Confidentiality
Guarantee
Free, No-obligation
Consultation
100% Customer
Satisfaction

TRUSTED BY ENGINEERS FROM

Scope:

ASTM D6905-03 describes the procedure to measure the ability of a coating film and its substrate to withstand defects caused by physical impact. This method determines the resistance of the coating to cracking, shattering, etc. This practice is useful in predicting the performance of the organic coating.

Test Procedure:

The organic coating to be tested is applied on suitable metal panels. Once the coating is cured, standard weight is dropped over the panel. The weight is dropped from a measured distance. Upon impact, the coating and substrate undergo deformation. The surface is then visually inspected for cracks on the coating surface.

Specimen size:

The material to be tested is to be applied uniformly over the metal panels tested by the impact flexibility tester. The thickness of the coating is measured.

Data:

The maximum percent elongation or flexibility of the organic coating under test is reported.

Recently Searched by other expert

Materials Testing

ASTM E572 Analysis of Stainless and Alloy Steels by WDXRF

ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.

ASTM D2674 Analysis of Sulfochromate Etch Solution

The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.

Antigenic Protein in Hevea Natural Rubber ASTM D6499

An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.

ASTM Standards

ASTM G65 Abrasion Test Using the Dry Sand/Rubber Wheel Apparatus

ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.

ASTM E2141 Accelerated Aging of Electrochromic Devices in Sealed Glass Units

ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.

ASTM C724 Acid Resistance of Ceramic Decoration on Architectural Glass

ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.

Send us a request

Just share your testing requirements and leave the rest on us!

Free, no-obligation consultation
Guaranteed confidentiality
Quick turnaround time
Hassle-free process

Let us combine our capabilities to achieve success!!