ASTM D6252-98 Test for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
ASTM D6252-98 is used to determine the peel adhesion of pressure-sensitive label stocks. Peel adhesion is the force required to remove a pressure-sensitive adhesive from a testing plate or its own backing material.
TRUSTED BY
Precision-driven testing for dimensional accuracy and compliance
- Overview
- Scope, Applications, and Benefits
- Test Process
- Specifications
- Instrumentation
- Results and Deliverables
Overview
ASTM D6252-98 provides a test method for determining the peel adhesion strength of pressure-sensitive label stocks at a 90° angle. This test measures the force required to remove a label from a substrate under controlled conditions.
It is widely used in packaging, labeling, and adhesive industries to evaluate bonding performance and reliability of pressure-sensitive adhesives.
Scope, Applications, and Benefits
Scope
ASTM D6252-98 evaluates the adhesion strength of pressure-sensitive labels by measuring peel force at a 90° angle. It ensures consistent adhesive performance for labeling applications.
The test evaluates:
- Peel adhesion strength
- Bonding performance to substrates
- Adhesive consistency
- Effect of surface interaction
- Suitability for labeling applications
Applications
- Packaging labels
- Product identification labels
- Barcode and shipping labels
- Industrial adhesive tapes
- Consumer goods labeling
- Quality control in adhesive manufacturing
Benefits
- Ensures reliable label adhesion
- Improves product labeling performance
- Supports adhesive formulation development
- Enables comparison of adhesive materials
- Helps meet industry standards
Test Process
Sample Preparation
Label stock is applied to a standard test panel.
1Conditioning
Sample is conditioned under controlled temperature and humidity.
2Peel Testing
Label is peeled at a 90° angle using a testing machine.
3Data Recording & Evaluation
Peel force is measured and analyzed.
4Technical Specifications
| Parameter | Details |
|---|---|
| Applicable Materials | Pressure-sensitive label stocks |
| Peel Angle | 90° |
| Peel Rate | 300 mm/min ± 30 mm/min |
| Substrate | Standard test panel (e.g., stainless steel) |
| Test Temperature | Approximately 23°C ± 2°C |
| Conditioning Humidity | 50% ± 5% RH |
| Measured Outputs | Peel adhesion force (N/m or N/25 mm) |
Instrumentation Used for Testing
- Universal testing machine
- Peel adhesion test fixture (90° setup)
- Standard test panels
- Roller for label application
- Environmental conditioning chamber
- Data acquisition system
Results and Deliverables
- Peel adhesion strength values
- Adhesion performance evaluation
- Failure mode analysis (adhesive/cohesive)
- Test condition summary
- ASTM compliance report
Why Choose Infinita Lab for ASTM D6252-98?
With Infinita Lab (www.infinitalab.com), you are guaranteed a Nationwide Network of Accredited Laboratories spread across the USA, the best Consultants from around the world, Convenient Sample Pick-Up and Delivery, and Fast Turnaround Time.
Our team understands the stakes and subtleties of every test. Whether you’re validating a new Product, de-risking a prototype, or navigating complex compliance requirements, our specialists guide the process with rigor and clarity.
Looking for a trusted partner to achieve your research goals? Schedule a meeting with us, send us a request, or call us at (888) 878-3090 to learn more about our services and how we can support you. Request a Quote
Frequently Asked Questions
ASTM D6252-98 is a standard test method used to determine the peel adhesion strength of pressure-sensitive label stocks at a 90° angle, evaluating how well labels adhere to surfaces.
Compared to the 180-degree peel test, the 90-degree peel test can cater to a broader range of adhesive sample measurements and testing possible with shorter sample pieces compared with the 180-degree peel test settings. In the peel test, the tape width also affects the measurement results.
ASTM D6252-98 helps ensure label performance by measuring adhesion strength, preventing label failure, improving product reliability, and maintaining quality in packaging and labeling applications.
ASTM D6252-98 involves applying a label to a standard surface, then peeling it off at a 90° angle using a testing machine to measure the force required for removal.
The test requires a tensile testing machine, standard test panels, and controlled application tools to ensure consistent adhesion and accurate peel force measurement.
Request a Quote
Submit your material details and receive testing procedures, pricing, and turnaround time within 24 hours.
Quick Turnaround and Hasslefree process
Confidentiality Guarantee
Free, No-obligation Consultation
100% Customer Satisfaction
