ASTM E3097 Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
ASTM E3097 test method covers the process of obtaining the residual strain and transformation temperature of shape memory alloys when they undergo applied axial stress at a specific temperature. The errors in strain measurement are rectified by making adjustments in the gripping mechanism. The final results are expressed in SI units.
Scope:
ASTM E3097 test method defines a standard for the selection and design of shape memory alloys. Constant force thermal cycling tests cover the effect of thermal cycling on the material. The method is helpful for compression testing and measuring the potential strength of shape memory alloys. The impact of temperature on the specimen and fluctuations in the strain are also determined.
Procedure:
In ASTM E3097, a conventional uniaxial tension or compression apparatus is used with a temperature regulator. The material is heated at a specified temperature and cooled later on. The continuous heating and cooling of the specimen take place, and then the thermal conditions are equilibrated. Stress is applied to it. An extensometer is attached to the specimen, and the strain is compensated in it through zero-force thermal strain compensation. The sample strain is calculated due to the continuous fluctuation in temperature during the heating and cooling cycles.
Specimen size
For ASTM E3097, the specimen size is adjusted as per the need. As in this case, the length of the specimen is one times the diameter.
Data:
The following shape memory parameters are calculated for ASTM E3097:
Actuation Strain: eact
Transformation Strain: et
Thermal Transformation Span: TSPAN
Hysteresis Width: WIDTH
Conclusion:
ASTM E3097 test method defines a standard for the selection and design of shape memory alloys.
Talk to Our Experts Today!
Submit your contact info and we’ll get back to you within 24 hours
Full Spectrum of ASTM Material Testing — Backed by 2,000+ Trusted Lab Partners
ASTM standards for chemical composition, physical properties, failure analysis, and other routine and non-routine testing for polymers and plastics
ASTM standards for determination of mechanical, physical, and thermal properties, and performance of monolithic and composite ceramics
ASTM standards guiding various destructive, non-destructive and analytical tests for quality control of different metals and alloys
ASTM standards for chemical analysis of solid, liquid and gaseous materials for specification compliance and quality control
ASTM standards for various chemical, physical, stability and exposure analysis of paints and coatings
Our Services
Metrology
A variety of microscopy and spectroscopy tools available for precise measurements from the nano to the meter scale.
Learn More
Materials Testing
ASTM and ISO standard and custom chemical, mechanical, thermal, corrosion tests, etc. for all materials metals, ceramic or polymers.
Learn More
Product Testing
Thousands of tests for product quality and reliability under heat, humidity, temperature shock, vibration, drop, electrostatic discharge.
Learn More
