ASTM E436 Drop-Weight Tear Tests
Drop-weight tear tests (DWTT) on ferritic steels with thicknesses ranging from 3.18 mm to 19.1 mm are covered by the standard test method ASTM E436. Drop weight tear testing is a material characterization test for pipelines to prevent brittle fracture and crack arrest (seamless or welded). The values expressed in SI units should be considered standard.
Scope:
The standard test method, Drop-Weight Tear Tests ASTM E436, is used to determine the appearance of propagating fractures in plain carbon or low-alloy pipe steels (yield strengths less than 825 MPa) over the temperature range where the fracture mode changes from brittle (cleavage or flat) to ductile. The goal of ASTM E436 is to investigate the impact of metallurgical factors, as well as to evaluate materials to determine suitability and to ensure product quality control.
Procedure:
In the ASTM E436 test, specimens are completely immersed in a suitable liquid at a specific temperature, and then the specimens are broken within 10s. Finally, the specimens are placed in the testing machine so that the notch in the specimen is within 1.59 mm of the centerline of the tup on the hammer.
Specimen size
A 76.2 mm by 305 mm full-plate-thickness edge-notch bend specimen with a pressed notch shall be used for ASTM E436 testing.
Result
If the specimen buckles during impact, the test is considered invalid.
Conclusion:
The standard test method, Drop-Weight Tear Tests ASTM E436, is used to determine the appearance of propagating fractures in plain carbon or low-alloy pipe steels (yield strengths less than 825 MPa) over the temperature range where the fracture mode changes from brittle (cleavage or flat) to ductile.
Talk to Our Experts Today!
Submit your contact info and we’ll get back to you within 24 hours
Full Spectrum of ASTM Material Testing — Backed by 2,000+ Trusted Lab Partners
ASTM standards for chemical composition, physical properties, failure analysis, and other routine and non-routine testing for polymers and plastics
ASTM standards for determination of mechanical, physical, and thermal properties, and performance of monolithic and composite ceramics
ASTM standards guiding various destructive, non-destructive and analytical tests for quality control of different metals and alloys
ASTM standards for chemical analysis of solid, liquid and gaseous materials for specification compliance and quality control
ASTM standards for various chemical, physical, stability and exposure analysis of paints and coatings
Our Services
Metrology
A variety of microscopy and spectroscopy tools available for precise measurements from the nano to the meter scale.
Learn More
Materials Testing
ASTM and ISO standard and custom chemical, mechanical, thermal, corrosion tests, etc. for all materials metals, ceramic or polymers.
Learn More
Product Testing
Thousands of tests for product quality and reliability under heat, humidity, temperature shock, vibration, drop, electrostatic discharge.
Learn More
