ASTM E354-93 Chemical Analysis Iron, Nickel, and Cobalt Alloys
The standard test methods for the chemical analysis of high-temperature, electrical, magnetic, and other similar iron, nickel, and cobalt alloys are covered under the ASTM E354-93 standard test. These test methods for the chemical analysis of metals and alloys are primarily intended as referee methods to test such materials for compliance with compositional specifications.
Scope:
ASTM E354-93 standard method includes the test methods for chemical analysis of high-temperature iron, nickel, and cobalt alloys with demarcated chemical compositions. methanol. The test methods in this standard are contained under the sections as follows:
| Test Methods | Sections |
| Manganese by the Periodate Photometric Method (0.05 to 2.00%) | 8 |
| Phosphorus by the Molybdenum Blue Photometric Method (0.002 to 0.08%) | 18 |
| Sulfur by the Combustion-Iodate Titration Method (0.005 to 0.1%) | 37 |
| Silicon by the Gravimetric Method (0.05 to 5.00%) | 46 |
| Cobalt by the Ion-Exchange-Potentiometric Titration Method (2 to 75%) | 53 |
| Cobalt by the Nitroso-R-Salt Photometric Method (0.10 to 5.0 %) | 61 |
| Copper by the Sulfide Precipitation-Electrodeposition Gravimetric Method (0.01 to 10.00 %) | 71 |
| Carbon, Total, by the Combustion Gravimetric Method (0.05 to 1.10%) | 79 |
| Copper by Neocuproine Photometric Method (0.01 to 10.00 %) | 90 |
| Aluminium, Total, by the 8-Quinolinol Gravimetric Method (0.20 to7.00%) | 100 |
| Nickel by the Dimethylglyoxime Gravimetric Method (0.1 to 84.0%) | 135 |
| Tin by the Solvent Extraction–Atomic Absorption Method (0.002 to 0.10%) | 143 |
| Molybdenum by the Photometric Method (0.01 to 1.50%) | 153 |
| Chromium by the Atomic Absorption Method (0.006 to 1.00%) | 165 |
| Chromium by the Peroxydisulfate Oxidation—Titration Method(0.10 to 33.00 %) | 175 |
| Molybdenum by the Ion Exchange 8-Hydroxyquinoline Gravimetric Method (1.5 to 30 %) | 184 |
| Iron by the Silver Reduction Titrimetric Method (1.0 to 50.0%) | 192 |
Results:
Combustion gravimetric method is used determine the total carbon content. The sample is burned in a stream of oxygen, and the carbon dioxide in the evolved gases is collected in a suitable absorbent and weighed. The results obtained are as
| Test Specimen | Percent Carbon |
| Monel-type alloy | 0.080 |
| High-speed steel | 0.81 |
| Nickel-base alloy | 1.49 |
Talk to Our Experts Today!
Submit your contact info and we’ll get back to you within 24 hours
Full Spectrum of ASTM Material Testing — Backed by 2,000+ Trusted Lab Partners
ASTM standards for chemical composition, physical properties, failure analysis, and other routine and non-routine testing for polymers and plastics
ASTM standards for determination of mechanical, physical, and thermal properties, and performance of monolithic and composite ceramics
ASTM standards guiding various destructive, non-destructive and analytical tests for quality control of different metals and alloys
ASTM standards for chemical analysis of solid, liquid and gaseous materials for specification compliance and quality control
ASTM standards for various chemical, physical, stability and exposure analysis of paints and coatings
Our Services
Metrology
A variety of microscopy and spectroscopy tools available for precise measurements from the nano to the meter scale.
Learn More
Materials Testing
ASTM and ISO standard and custom chemical, mechanical, thermal, corrosion tests, etc. for all materials metals, ceramic or polymers.
Learn More
Product Testing
Thousands of tests for product quality and reliability under heat, humidity, temperature shock, vibration, drop, electrostatic discharge.
Learn More
