ASTM C136/C136M –19 Method for Sieve Analysis of Fine and Coarse Aggregates

ASTM C136/C136-19 explains measuring the particle-size distribution of fine and coarse aggregates by sieving. Some speci fications for aggregates contain grading requirements for both fine and coarse fractions. Its values are stated in SI units as they are considered as standards.... Read More

Average 30% Cost
Savings
100% Confidentiality
Guarantee
Free, No-obligation
Consultation
100% Customer
Satisfaction

TRUSTED BY ENGINEERS FROM

Scope:

ASTM C136/C136-19 is highly significant in terms of grading material that is either being selected for aggregate or being used as aggregate. Then it is further used to determine compliance of the particle size distribution to control the production of multiple aggregate products.

Procedure:

To perform ASTM C136/C136M-19 test method for Sieve Analysis of Fine and Coarse Aggregates, the mass of the sample is to be measured first. Then it is being separated through multiple sieves of particularly narrow openings to measure particle size distribution.

Specimen Detail:

The given sample must be dried at a temperature of 110 °C [230 °F].

Result:

In this way, by carefully passing the given material into the narrow openings of various sieves, Fine and Coarse Aggregates can easily be separated and analyzed.

Conclusion:

ASTM C136/C136-19 is very important in terms of grading material. It has vast scope in the sieve analysis of materials. Therefore, it is the most preferable to analyze fine and coarse aggregates.

Recently Searched by other expert

Materials Testing

ASTM E572 Analysis of Stainless and Alloy Steels by WDXRF

ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.

ASTM D2674 Analysis of Sulfochromate Etch Solution

The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.

Antigenic Protein in Hevea Natural Rubber ASTM D6499

An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.

ASTM Standards

ASTM G65 Abrasion Test Using the Dry Sand/Rubber Wheel Apparatus

ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.

ASTM E2141 Accelerated Aging of Electrochromic Devices in Sealed Glass Units

ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.

ASTM C724 Acid Resistance of Ceramic Decoration on Architectural Glass

ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.

Send us a request

Just share your testing requirements and leave the rest on us!

Quick Turnaround and Hasslefree process
Confidentiality Guarantee
Free, No-obligation Consultation
100% Customer Satisfaction

Let us combine our capabilities to achieve success!!