ASTM C94/C94M Specification for Ready-Mixed Concrete

ASTM C94/C94M test method determines the properties of ready-mixed concrete. The ready-mixed concrete is manufactured as per the purchaser’s demand and checked for its quality. The final results of this method are displayed keeping in view the international standards and inch-pound units.... Read More

Average 30% Cost
Savings
100% Confidentiality
Guarantee
Free, No-obligation
Consultation
100% Customer
Satisfaction

TRUSTED BY ENGINEERS FROM

Scope:

ASTM C94/C94M test method covers the quality requirements of ready-mixed concrete. The uniformity properties of various materials are determined, and their application is decided. The results aid in the research, quality check, performance evaluation, and improvement of the materials. The method is intended to ensure effective performance and durability.

Procedure:

The dimensions of the specimen to be used in ASTM C94/C94M test are determined, and the specimen undergoes testing depending on the predetermined tolerance level. The method covers central-mixed concrete, shrink-mixed concrete, and truck-mixed concrete. The results are recorded, evaluated, and documented as per the globally accepted standards. The method also covers packaging and certification.

Video 01: ASTM C94 Specification for Ready-Mixed Concrete

Specimen detail:

Specimen size should be as per the requirements. In this case, each sample consisting of approximately 0.1 cubic meters shall be taken after discharge of approximately 15 % and 85 % of the load.

Result:

The density of each sample is calculated by applying the formula where D stands for Density, M for Mass, and V for Volume.

Conclusion:

ASTM C94/C94M test method is specifically important for the quality assurance and durability check of ready-mixed concrete.

Recently Searched by other expert

Materials Testing

ASTM E572 Analysis of Stainless and Alloy Steels by WDXRF

ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.

ASTM D2674 Analysis of Sulfochromate Etch Solution

The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.

Antigenic Protein in Hevea Natural Rubber ASTM D6499

An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.

ASTM Standards

ASTM G65 Abrasion Test Using the Dry Sand/Rubber Wheel Apparatus

ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.

ASTM E2141 Accelerated Aging of Electrochromic Devices in Sealed Glass Units

ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.

ASTM C724 Acid Resistance of Ceramic Decoration on Architectural Glass

ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.

Just share your testing requirements and leave the rest on us!

Quick Turnaround and Hasslefree process
Confidentiality Guarantee
Free, No-obligation Consultation
100% Customer Satisfaction