What Is Cross Sectional Analysis?
Cross-sectional analysis is a destructive method of peeking inside the material and looking at its inner structure and how different materials meet at the boundaries. The material is cut and polished to allow us to look at its cross-section and see what is inside the material and how it is structured on the inside.
This method is widely used in failure analysis, electronics analysis, and metallurgical analysis. With the advent of new technology and the use of Focused Ion Beam-Scanning Electron Microscopy (FIB-SEM), it is possible to explore the inner features of the material and how different materials meet at the boundaries.
Applications and Benefits of Cross Sectional Analysis Testing
Scope
Cross-sectional analysis is a popular technique for “looking inside” a variety of materials and parts. This is a powerful technique for “mapping” the composition and quality of each layer, bonding, defects, voids, and other internal features that are never visible on the surface. This is a vital technique for quality control, failure analysis, and research in a variety of applications.
Cross-sectional analysis is widely applied to:
– Metals and alloys
– Coatings and thin films
– Composite materials
– Polymers and multi-layer structures
Applications
- Failure analysis of electronic devices
- Metallographic examination of metals and alloys
- Inspection of solder joints and electronic packaging
- Layer thickness measurement in coatings and thin films
- Contamination and defect identification
- Microstructure evaluation of materials
- Quality control of manufactured components
- Semiconductor device analysis
- 3D structural analysis using serial tomography
Benefits
- Reveals internal structure and layer interfaces
- Identifies manufacturing defects and failure mechanisms
- Enables detailed microstructural characterisation
- Supports contamination and chemical identification
- Provides dimensional measurements at the micrometre scale
- Allows targeted analysis using FIB-SEM
Our Testing Procedure
Sample Preparation
The sample is sectioned and mounted in epoxy to stabilize and preserve internal structures.
1Grinding and Polishing
The mounted sample is ground and polished to obtain a smooth cross-sectional surface.
2Microscopic Examination
Optical microscopy or SEM is used to observe internal structures and interfaces.
3Advanced Analysis
Techniques such as SEM/EDS, FIB-SEM, and tomography provide detailed compositional and microstructural insights.
4Test parameters and requirements
| Parameter | Details |
|---|---|
| Preparation Method | Cutting, epoxy mounting, vacuum impregnation, grinding, and polishing |
| Analysis Scale | Micrometre to full-device level |
| Analysis Types | Structural, dimensional, chemical, and contamination analysis |
| Applicable Materials | Metals, polymers, semiconductors, composites, coatings, electronic assemblies |
| Advanced Technique | Focused Ion Beam – Scanning Electron Microscopy (FIB-SEM) |
| Output | Microstructural images, elemental composition, dimensional measurements |
- Optical metallographic microscope
- Scanning electron microscope (SEM)
- Energy dispersive spectroscopy (EDS) system
- Focused ion beam scanning electron microscope (FIB-SEM)
- X-ray fluorescence (XRF) analyser
- Electron backscatter diffraction (EBSD) system
- Fourier transform infrared spectroscopy (FTIR) system
Equipment and Instrumentation Used for Testing
What You Receive: Test Report, Data, and Certification
- Cross-sectional microstructure images
- Layer thickness and dimensional measurements
- Elemental composition analysis
- Defect and failure mechanism identification
- Contamination analysis reports
- 3D tomography reconstruction (if applicable)
- Metallographic evaluation reports
Cross Sectional Analysis FAQs
Cross-sectional analysis is a destructive technique that enables engineers to look inside materials, parts, or devices by cutting a cross-section and polishing it for microscopic and chemical examination.
It enables engineers to look inside the layers, interfaces, cracks, and voids that are not visible from the outside and helps pinpoint the causes of failures in both electronic and mechanical components.
The cross-sectional technique may be employed on metals, polymers, composites, coatings, semiconductors, electronic components, and layered materials.
They are typically cut into sections that are then encased in an epoxy resin. The sections are ground and polished to give a smooth surface ready for microscopic examination.
The techniques that are most commonly employed are SEM/EDS, FTIR, XRF, EBSD, metallographic microscopes, and FIB-SEM.
Why Choose Infinita Lab for Cross Sectional Analysis Testing?
When your Cross Sectional Analysis results have to hold up - for compliance, a customer audit, or an engineering decision - accuracy and an unbiased third-party report matter more than price. Infinita Lab routes your cross sectional analysis testing to ISO/IEC 17025-accredited U.S. partner labs with hands-on method experience, so you get defensible data, transparent reporting, and turnaround times built around your project deadline - not ours.
Looking for an Accredited Partner for Cross Sectional Analysis Testing?
Send query us at hello@infinitalab.com or call us at (888) 878-3090 to learn more about our services and how we can support you.





















