ASTM D6007 Formaldehyde Concentration Testing in Air
ASTM D6007 is a standard test method for determining formaldehyde concentrations in air released by wood under defined temperature and other test conditions. The values are stated in standard SI units.
TRUSTED BY
Precision-driven testing for dimensional accuracy and compliance
- Overview
- Scope, Applications, and Benefits
- Test Process
- Specifications
- Instrumentation
- Results and Deliverables
Overview
ASTM D6007 determines the concentration of formaldehyde released into the air from materials under controlled environmental conditions. The test evaluates emissions from products such as wood panels, laminates, and construction materials.
This method is widely used in indoor air quality assessment, building materials testing, and regulatory compliance. It helps ensure that materials meet safety standards for formaldehyde emissions.
Scope, Applications, and Benefits
Scope
ASTM D6007 evaluates formaldehyde emissions by placing samples in a controlled chamber and measuring the concentration of formaldehyde released into the air.
The test evaluates:
- Formaldehyde emission levels
- Indoor air quality impact
- Material emission characteristics
- Compliance with emission standards
- Suitability for indoor applications
Applications
- Wood-based panels and furniture
- Laminates and flooring materials
- Adhesives and coatings
- Construction and building materials
- Indoor air quality testing
- Environmental compliance assessment
Benefits
- Ensures compliance with emission regulations
- Protects indoor air quality
- Supports material selection and certification
- Detects harmful emissions
- Enables comparison of material performance
Test Process
Test Process
Material samples are prepared and placed in a test chamber.
1Chamber Conditioning
Environmental conditions such as temperature and humidity are controlled.
2Emission Measurement
Air samples are collected and analyzed for formaldehyde content.
3Data Recording & Evaluation
Air samples are collected and analyzed for formaldehyde content.
4Technical Specifications
| Parameter | Details |
|---|---|
| Applicable Materials | Building materials and wood products |
| Chamber Volume | ~0.02 m³ to 1 m³ |
| Test Temperature | ~23°C ± 1°C |
| Relative Humidity | ~45% to 50% |
| Measurement Range | ~0.01 ppm to 5 ppm |
| Measured Outputs | Formaldehyde concentration (ppm or mg/m³) |
Instrumentation Used for Testing
- Environmental test chamber
- Air sampling system
- Formaldehyde analyzer (HPLC or spectrophotometer)
- Temperature and humidity control system
- Calibration standards
- Data acquisition system
Results and Deliverables
- Formaldehyde concentration values
- Emission rate analysis
- Indoor air quality assessment
- Compliance evaluation with standards
- Test condition summary
- ASTM compliance report
Frequently Asked Questions
ASTM D6007 measures formaldehyde concentration emitted into air from materials. It evaluates indoor air quality, helping ensure products meet emission limits for health and safety in building environments.
Key parameters include chamber conditions, temperature, humidity, air exchange rate, sample preparation, and analytical method. Controlled conditions ensure accurate measurement of formaldehyde emissions.
The test measures formaldehyde concentration, typically expressed in parts per million. Results indicate emission levels affecting indoor air quality and regulatory compliance.
ASTM D6007 applies to wood products, laminates, coatings, adhesives, and composite materials used in indoor environments where formaldehyde emissions are a concern.
ASTM D6007 results depend on chamber conditions and sample preparation. It may not fully represent real indoor environments, requiring additional testing for different conditions and long-term emission behavior.
Why Choose Infinita Lab for Advanced Materials Testing and Characterization?
At the core of this breadth is our network of 2,000+ accredited laboratories across the USA, offering access to over 10,000 testing methods and analytical services. From advanced materials characterization (SEM, TEM, RBS, XPS) to mechanical, chemical, environmental, biological, and standardized ASTM/ISO-compliant testing, we deliver unmatched flexibility, specialization, and scale. You are never limited by geography, facility, or methodology — Infinita Lab connects you to the right expertise and testing solution, every time.
Looking for a Trusted Partner for Accurate and Reliable Testing Services?
Send query us at hello@infinitlab.com or call us at (888) 878-3090 to learn more about our services and how we can support you.
Request a Quote
Submit your material details and receive testing procedures, pricing, and turnaround time within 24 hours.
Quick Turnaround and Hasslefree process
Confidentiality Guarantee
Free, No-obligation Consultation
100% Customer Satisfaction
