What Is ASTM D5766 Composite Open Hole Tensile Strength?
ASTM D5766 – Open-Hole Tensile Strength of Polymer Matrix Composite Laminates is a standard that describes the procedure for measuring the tensile strength of composite laminates with a central hole. The test assesses the influence of stress concentrations around holes, which represent fastener or bolt positions in a structure.
In this test, a flat composite specimen with a machined open hole is loaded uniaxially to failure. The test provides open-hole tensile strength and is critical for structural design, damage tolerance, and performance characterization of mechanically fastened composite structures. This test is widely used in aerospace and structural composite applications, where bolted or riveted joints introduce stress concentrations, making it critical for design validation and damage-tolerance assessment.
Applications and Benefits of ASTM D5766 Composite Open Hole Tensile Strength Testing
Scope
ASTM D5766 covers the determination of the open-hole tensile strength of polymer matrix composite laminates. The method evaluates the tensile behavior of composite materials containing a centrally machined hole to simulate stress concentrations typically found around fasteners or joints.
ASTM D5766 evaluates:
- Open-hole tensile strength of composite laminates
- Stress concentration effects due to holes
- Load-bearing capability near fastener locations
- Damage tolerance and structural integrity
- Comparative performance of composite materials
Applications
- Aircraft wing skin fastener hole qualification
- Fuselage frame joint and bolted connection design
- Empennage attachment and structural lug validation
- UAV composite airframe qualification
- Defense composite structures and armor panels
- Wind turbine blade root and bolted joints
- Motorsport composite chassis and structural components
- Space structures and satellite composite assemblie
Benefits
- Simulates real fastener hole conditions in composites
- Supports structural design and certification
- Helps evaluate damage tolerance performance
- Enables comparison across laminate configurations
- Improves the reliability of bolted composite joints
Our ASTM D5766 Testing Procedure
Specimen Preparation
Fabricate flat composite specimens and machine a centrally located hole to the specified diameter and tolerance.
1Mounting & Alignment
Install the specimen in the universal testing machine grips, ensuring proper axial alignment to avoid bending.
2Tensile Loading
Apply a uniaxial tensile load at the specified rate until failure, recording load and displacement data.
3Data Analysis & Reporting
Calculate open-hole tensile strength and document failure mode in accordance with ASTM International.
4ASTM D5766 Test Parameters and Requirements
| Parameter | Details |
|---|---|
| Material Type | Polymer matrix composite laminates |
| Specimen Type | Flat rectangular laminate with a centrally machined hole |
| Hole Diameter | 6.35 mm (0.25 in) |
| Number of Specimens | Minimum 5 per test condition |
| Specimen Width & Thickness | ~250 mm × 36 mm × laminate thickness |
| Edge Distance | Minimum specified ratio of width to hole diameter |
| Tabbing | End tabs are bonded if required to prevent grip damage |
| Testing Machine | Calibrated Universal Testing Machine (UTM) |
| Loading Mode | Uniaxial tensile loading |
| Crosshead Speed | ~2 mm/min (0.05 in/min) |
| Strain Measurement | Extensometer or strain gauges |
| Measured Parameter | Open-hole tensile strength |
- Universal Testing Machine (UTM)
- Load Cell
- Wedge or Hydraulic Grips
- Extensometer (if required)
- Strain Gauges (optional)
- Drill/Machining Tool for Hole Preparation
- Vernier Caliper / Micrometer
- Data Acquisition System (DAQ)
Equipment and Instrumentation Used for ASTM D5766 Testing
What You Receive: Test Report, Data, and Certification
- Open-Hole Tensile Strength
- Maximum Load at Failure
- Stress–Strain Data (if measured)
- Failure Mode Classification
- Specimen Dimensions and Hole Details
- Test Conditions Documentation
- Complete Test Report
ASTM D5766 Composite Open Hole Tensile Strength FAQs
ASTM D5766 determines the tensile strength of a composite laminate with a central hole drilled, testing the residual strength after damage due to stress concentration from fastener holes or penetrations.
Fastener holes in composites interrupt load-carrying fibers, resulting in stress concentrations. ASTM D5766 offers practical strength information for bolted joints, preventing premature failure of structures at joints subjected to loads.
ASTM D5766 is generally specified in the aerospace, automotive, wind energy, and defense industries where composite structures are typically loaded with high tensile loads and rely on mechanical fasteners.
The ASTM D5766 test method employs rectangular composite coupons that have a precision-drilled hole at their center. The hole geometry and edges must be accurately defined because the drilling quality affects the results of the open-hole tensile strength.
Unlike conventional tensile tests, the ASTM D5766 test method incorporates a controlled hole to introduce stress concentration, thus offering realistic strength information for composites that are used with mechanical fasteners or attachments.
ASTM D5766/D5766M does not cover open-hole compression testing; it determines the open-hole tensile strength of polymer matrix composite laminates. A specimen containing a centrally drilled hole is mounted in a universal testing machine and subjected to controlled tensile loading until failure. The maximum load and specimen dimensions are used to calculate open-hole tensile strength. The results help evaluate the effect of holes and stress concentrations on composite laminate strength and support material qualification and structural design.
Why Choose Infinita Lab for Composite Open Hole Tensile Strength Testing
When your Composite Open Hole Tensile Strength results have to hold up - for compliance, a customer audit, or an engineering decision - ASTM D5766 accuracy and an unbiased third-party report matter more than price. Infinita Lab routes your ASTM D5766 composite open hole tensile strength testing to ISO/IEC 17025-accredited U.S. partner labs with hands-on method experience, so you get defensible data, transparent reporting, and turnaround times built around your project deadline - not ours.
Need ASTM D5766 Composite Open Hole Tensile Strength Testing You Can Rely On?
Send query us at hello@infinitalab.com or call us at (888) 878-3090 to learn more about our services and how we can support you.
