ASTM A90: Zinc Coating Mass Testing Services
astm a90, zinc coating analysis, steel coating weight testing, mass of zinc coating, coating mass testing, astm a 90
TRUSTED BY
Get ASTM A90 compliant results — request your zinc coating mass testing quote
- Overview
- Scope, Applications, and Benefits
- Test Process
- Specifications
- Instrumentation
- Results and Deliverables
What Is ASTM A90 Zinc Coating Mass?
ASTM A90 specifies a test method for determining the mass of zinc coating on galvanized steel products. The test measures coating weight per unit area by removing the zinc layer and calculating the mass difference.
This method is widely used in industries such as construction, automotive, and infrastructure, where galvanized steel is used for corrosion protection. It ensures that zinc coatings meet required specifications for durability and service life.
Applications and Benefits of ASTM A90 Zinc Coating Mass Testing
Scope
ASTM A90 evaluates the mass of zinc coating on iron and steel articles by chemically stripping the coating and measuring weight loss. The test ensures compliance with coating thickness and uniformity requirements.
The test evaluates:
- Zinc coating mass per unit area
- Uniformity of coating distribution
- Effectiveness of the galvanization process
- Corrosion protection capability
- Compliance with coating specifications
Applications
- Galvanized steel sheets and structures
- Construction and infrastructure materials
- Automotive components
- Fasteners and hardware
- Transmission towers and poles
- Industrial coated products
Benefits
- Provides accurate measurement of coating mass
- Ensures adequate corrosion protection
- Supports quality control in galvanizing processes
- Assists in material selection and specification
- Enables comparison of coating performance
Our ASTM A90 Testing Procedure
Sample Preparation
Galvanized specimens are cleaned and prepared for testing.
1Coating Removal
Zinc coating is chemically stripped using an appropriate solution.
2Weight Measurement
Specimens are weighed before and after stripping.
3Data Recording & Evaluation
Coating mass per unit area is calculated and evaluated against requirements.
4ASTM A90 Test Parameters and Requirements
| Parameter | Details |
|---|---|
| Applicable Materials | Zinc-coated steel and iron |
| Specimen Area | ~50 cm² to 100 cm² |
| Coating Mass Range | ~50 g/m² to 600 g/m² |
| Stripping Solution | Acidic solution (e.g., inhibited HCl) |
| Measurement Accuracy | ±1 g/m² |
| Measured Outputs | Coating mass (g/m²) |
- Analytical balance (accuracy ±0.001 g)
- Chemical stripping solutions and containers
- Sample cutting tools
- Drying oven
- Protective laboratory equipment
- Data recording system
Equipment and Instrumentation Used for ASTM A90 Testing
What You Receive: Test Report, Data, and Certification
- Zinc coating mass per unit area (g/m²)
- Coating thickness estimation
- Uniformity assessment of coating
- Compliance with specification requirements
- Test condition summary
- ASTM compliance report
ASTM A90 Zinc Coating Mass FAQs
The ASTM A90 is a test method for determining the weight [mass] per unit area of zinc or zinc alloy coatings on a defined area of iron or steel by weighing before and after coating.
Zinc's most important role is to provide a barrier to protect steel against corrosion. The thickness and uniformity of the coating will influence this barrier effect.
The ASTM A90 test broadly applies zinc (galvanized) coatings. However, it can also be employed on other metallic coatings on iron and steel, such as aluminum, tin, or other protective coatings.
ASTM A90 evaluates coating mass per unit area and uniformity, ensuring zinc coatings meet specified requirements for durability and corrosion protection.
ASTM A90 evaluates coating mass under controlled conditions and may not fully represent coating performance in service environments affected by wear, corrosion, or environmental exposure factors.
Why Choose Infinita Lab for Zinc Coating Mass Testing
At the core of this breadth is our network of 2,000+ accredited laboratories across the USA, offering access to over 10,000 testing methods and analytical services. From advanced materials characterization (SEM, TEM, RBS, XPS) to mechanical, chemical, environmental, biological, and standardized ASTM/ISO-compliant testing, we deliver unmatched flexibility, specialization, and scale. You are never limited by geography, facility, or methodology — Infinita Lab connects you to the right expertise and testing solution, every time.
Need ASTM A90 Zinc Coating Mass Testing You Can Rely On?
Send query us at hello@infinitalab.com or call us at (888) 878-3090 to learn more about our services and how we can support you.
Request a Quote
Submit your material details and receive testing procedures, pricing, and turnaround time within 24 hours.
Quick Turnaround and Hasslefree process
Confidentiality Guarantee
Free, No-obligation Consultation
100% Customer Satisfaction
