ASTM D7710 Determination of Volume and Density of Rigid Material

ASTM D7710 test technique is used to determine the volume and density of solid items with irregular shapes. The values s tated in SI units are considered standard.... Read More

Average 30% Cost
Savings
100% Confidentiality
Guarantee
Free, No-obligation
Consultation
100% Customer
Satisfaction

TRUSTED BY ENGINEERS FROM

Scope:

ASTM D7710 test procedure establishes a consistent approach for gathering data for research and development, quality control, acceptance and rejection under specified conditions, and particular objectives.

Procedure:

In ASTM D7710, the vessel is filled with the media and is then submerged at the bottom of the vessel. The media is carefully removed, and the total volume is measured using a graduated cylinder. The test is conducted three times and then the average of these readings is taken. The volume is reported in liters. The density is determined by dividing the mass of the specimen by volume.

Video: Method to determine the density of solids

Specimen size:

Specimens should be conditioned at 23 ± 2°C.

Data:

In ASTM D7710 testing, the volume can be determined as follow:

Volume(liter) =Weight of media/Weight of one liter of media

Density can be calculated as:

Density = Mass of specimen/Volume

Conclusion:

ASTM D7710 test technique is used to determine the volume and density of solid items with irregular shapes.

Recently Searched by other expert

Materials Testing

ASTM E572 Analysis of Stainless and Alloy Steels by WDXRF

ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.

ASTM D2674 Analysis of Sulfochromate Etch Solution

The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.

Antigenic Protein in Hevea Natural Rubber ASTM D6499

An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.

ASTM Standards

ASTM G65 Abrasion Test Using the Dry Sand/Rubber Wheel Apparatus

ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.

ASTM E2141 Accelerated Aging of Electrochromic Devices in Sealed Glass Units

ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.

ASTM C724 Acid Resistance of Ceramic Decoration on Architectural Glass

ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.

Send us a request

Just share your testing requirements and leave the rest on us!

Free, no-obligation consultation
Guaranteed confidentiality
Quick turnaround time
Hassle-free process

Let us combine our capabilities to achieve success!!