ASTM D2842: Rigid Foam Water Absorption Testing Services
This test method, ASTM D2842, involves measuring the change in buoyant force caused by immersion to determine the water absorption of rigid cellular polymers. The values expressed in SI units should be considered as standard.
TRUSTED BY
Get ASTM D2842 compliant results — request your rigid foam water absorption testing quote
- Overview
- Scope, Applications, and Benefits
- Test Process
- Specifications
- Instrumentation
- Results and Deliverables
What Is ASTM D2842 Rigid Foam Water Absorption?
ASTM D2842 describes a standardised method for determining the water absorption of rigid cellular plastics (rigid foam). Water absorption is an important property for foam insulation and structural foam applications because absorbed moisture increases thermal conductivity, reduces mechanical strength, and can promote long-term dimensional instability.
The test involves immersing a precisely measured rigid foam specimen in distilled water at a specified depth and temperature for a defined period. After immersion, the specimen is removed, surface-dried, and reweighed. Water absorption is calculated as the volume of water absorbed per unit of specimen surface area, or as a percentage of specimen volume. This data allows designers and specifiers to assess the foam’s suitability for wet or humid service environments.
Applications and Benefits of ASTM D2842 Rigid Foam Water Absorption Testing
Scope
ASTM D2842 evaluates:
- Volume of water absorbed per unit area of rigid cellular plastics
- Percent water absorption by volume
- Open-cell content influence on water uptake
- Effect of immersion depth and temperature on absorption
- Long-term moisture resistance of foam insulation
- Comparative water absorption across foam types and densities
Applications
- Building and construction insulation boards
- Cold storage and refrigeration panel cores
- Roofing system insulation
- Below-grade foundation insulation
- Marine and offshore foam applications
- Pipe and equipment insulation
- Sandwich panel core materials
Benefits
- Predicts moisture resistance in wet service environments
- Supports material selection for below-grade or marine use
- Provides data for thermal performance modeling
- Enables compliance with building code moisture requirements
- Identifies foam formulations with excessive open-cell content
- Reduces long-term insulation degradation risk
Our ASTM D2842 Testing Procedure
Specimen Preparation
Rigid foam specimens are cut to specified dimensions, measured, and weighed.
1Immersion
Specimens are submerged at the specified depth in distilled water at the test temperature.
2Duration
Specimens remain immersed for the required test period (typically 96 hours).
3Post-Immersion Measurement
Specimens are removed, surface water is blotted, and specimens are reweighed immediately.
4ASTM D2842 Test Parameters and Requirements
| Parameter | Details |
|---|---|
| Applicable Materials | Rigid cellular plastics / rigid foam materials |
| Specimen Types | Cut foam specimens, typically rectangular blocks or sheets |
| Immersion Condition | 5.1 cm (2 in.) water head |
| Standard Test Duration | 96 hours |
| Test Environment | Controlled ambient laboratory conditions |
- Water immersion tank with temperature control
- Analytical balance
- Digital calipers for specimen dimensioning
- Blotting paper or absorbent cloth
- Timer
- Data recording system
Equipment and Instrumentation Used for ASTM D2842 Testing
What You Receive: Test Report, Data, and Certification
- Water absorption volume per unit area
- Percent water absorption by volume
- Pre- and post-immersion mass records
- Specimen dimensional data
- Quality assurance reports
ASTM D2842 Rigid Foam Water Absorption FAQs
It measures the amount of water absorbed by rigid cellular plastics after immersion for a specified time period.
The standard immersion period is 96 hours, unless otherwise agreed between the manufacturer and purchaser.
This test is commonly used for rigid foam insulation boards, polyurethane foams, polystyrene foams, and other cellular plastics.
It helps evaluate moisture resistance, dimensional stability, and insulation performance of foam materials in service.
It is widely used in construction, insulation, packaging, automotive, and polymer manufacturing industries.
Why Choose Infinita Lab for Rigid Foam Water Absorption Testing?
At the core of this breadth is our network of 2,000+ accredited laboratories across the USA, offering access to over 10,000 testing methods and analytical services. From advanced materials characterization (SEM, TEM, RBS, XPS) to mechanical, chemical, environmental, biological, and standardized ASTM/ISO-compliant testing, we deliver unmatched flexibility, specialization, and scale. You are never limited by geography, facility, or methodology — Infinita Lab connects you to the right expertise and testing solution, every time.
Need ASTM D2842 Rigid Foam Water Absorption Testing You Can Rely On?
Send query us at hello@infinitalab.com or call us at (888) 878-3090 to learn more about our services and how we can support you.
Request a Quote
Submit your material details and receive testing procedures, pricing, and turnaround time within 24 hours.
Quick Turnaround and Hasslefree process
Confidentiality Guarantee
Free, No-obligation Consultation
100% Customer Satisfaction
