ASTM E794−06 Melting and Crystallization Temperatures by Thermal Analysis

ASTM E794−06 Test Scope:

ASTM E794 – 06 is useful for quality control, specification acceptance, and research. The fusion and crystallization temperatures of crystalline materials can be determined quickly using differential scanning calorimetry and differential thermal analysis. 

ASTM E794−06 Test Procedure

ASTM E794 – 06 entails heating a test specimen at a regulated rate through the fusion area in a controlled environment. The difference in heat flow (for DSC) or temperature (for DTA) between the test and reference materials as a result of energy changes is constantly monitored and recorded. The absorption of energy by the specimen marks a transition, resulting in an endothermic peak in the heating curve.

ASTM E794−06 Test Specimen size

The mass of the specimen to be utilized is determined by the size of the transition enthalpy and the capsule volume. For comparing multiple results, use similar mass (65 %) and encapsulation. Weigh 1 to 15 mg of material to an accuracy of 0.01mg into a clean, dry specimen capsule.

Read more: Thermal Analysis of Molten Salts

Data

Tm = melting temperature

Tp = melting peak maximum,°C

Tf = return to baseline,°C