ASTM D6113 Using Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials
ASTM D6113 test method involves subjecting insulating materials to measure the heat release rate and a variety of other fire-test-response parameters. The values stated in SI units are to be regarded as the standard.
Scope:
ASTM D6113 measurements give data that is valuable in the design of electrical or optical connections and product development. Heat release measurements give a quantitative assessment of changes in fire performance.
Procedure:
In ASTM D6113, a data gathering system is prepared for testing according to the system’s operational protocols. Data is collected in 5 minutes. After inserting the test specimen, the spark igniter is energized and brought into place quickly. Physical changes such as melting, and swelling are observed.
Specimen size:
The ASTM D6113 test specimen should be conditioned at 100 ± 2 by 100 ± 2 mm.
Data:
The average mass loss rate (in g/s) is calculated for the time interval when 10% of the ultimate test specimen mass loss happened and when 90% of the ultimate test specimen mass loss occurred.
Conclusion:
ASTM D6113 measurements give data that is valuable in the design of electrical or optical connections and product development.
Talk to Our Experts Today!
Submit your contact info and we’ll get back to you within 24 hours
Full Spectrum of ASTM Material Testing — Backed by 2,000+ Trusted Lab Partners
ASTM standards for chemical composition, physical properties, failure analysis, and other routine and non-routine testing for polymers and plastics
ASTM standards for determination of mechanical, physical, and thermal properties, and performance of monolithic and composite ceramics
ASTM standards guiding various destructive, non-destructive and analytical tests for quality control of different metals and alloys
ASTM standards for chemical analysis of solid, liquid and gaseous materials for specification compliance and quality control
ASTM standards for various chemical, physical, stability and exposure analysis of paints and coatings
Our Services
Metrology
A variety of microscopy and spectroscopy tools available for precise measurements from the nano to the meter scale.
Learn More
Materials Testing
ASTM and ISO standard and custom chemical, mechanical, thermal, corrosion tests, etc. for all materials metals, ceramic or polymers.
Learn More
Product Testing
Thousands of tests for product quality and reliability under heat, humidity, temperature shock, vibration, drop, electrostatic discharge.
Learn More
