ASTM B221-21 Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM B221-21 test method determines the properties of aluminum and aluminum-alloy extruded bars, rods, wire, profiles, and tubes in the aluminum alloys. The products tested by this method are made by the hot extrusion method. The final results of this method are displayed keeping in view the international standards.
Scope:
ASTM B221-21 test method covers aluminum and aluminum alloys. The method proceeds with the quality check, heat treatment, and testing of the chemical composition of materials. The results obtained from this method help in quality control, research, and performance evaluation of various aluminum alloys.
Procedure:
The specimen is manufactured as per the specified measurements, and limits are specified for the chemical composition of the material. The analysis is done by the agreement between the purchaser and the producer. Tensile strength is measured, and heat treatment is applied. Then, a stress-corrosion resistance test is performed, and various alloys’ cracking capabilities are tested. The method also covers the packaging and certification.
Specimen Size:
Specimen size should be as per the requirements. In this case, the material should be thinner than 0.062 inches, and the diameter of the wire should be about 0.125 inches.
Data:
The method covers the certification, sampling, testing, and specimen inspection within the set limits.
Conclusion:
ASTM B221-21 test method is specifically important for the quality assurance and durability check of aluminum alloys. In this regard, the top service provider is the Infinita Lab, which ensures efficient and reliable testing.
ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 is a standard test method for the analysis of sulfochromate etches solution used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.
ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.
ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.
Send us a request
Process for testing
STEP 01
You share material and testing requirements with us
STEP 02
We ensure your sample pick-up in an ensured manner
STEP 03
We deliver test report to your inbox
Just share your testing requirements and leave the rest on us!