ASTM A923 Detrimental Intermetallic Phase in Duplex Ferritic Stainless Steels

The goal of these test methods, ASTM A923, is to determine the existence of intermetallic phases in duplex stainless ste els that have a significant impact on the toughness or corrosion resistance. The values given in inch-pound or SI units should be considered as standard.... Read More

Average 30% Cost
Savings
100% Confidentiality
Guarantee
Free, No-obligation
Consultation
100% Customer
Satisfaction

TRUSTED BY ENGINEERS FROM

Scope:

ASTM A923 test methods are used to detect a harmful intermetallic phase in duplex austenitic/ferritic stainless steel that significantly impacts its toughness and corrosion resistance. There are three test methods described in ASTM A923 to classify duplex stainless steel structures: Sodium hydroxide etch test, Charpy impact test, and ferric chloride corrosion test.

Procedure:

Test methods in ASTM A923	Section
Test method A (SODIUM HYDROXIDE ETCH TEST)	3-7
Test method B (CHARPY IMPACT TEST)	8-13
Test method C (C—FERRIC CHLORIDE CORROSION TEST)	14-20

Result

Based on the recorded corrosion rate in comparison to the established acceptance criteria, the test result is reported as passed or failed.

Conclusion:

ASTM A923 test methods are used to detect a harmful intermetallic phase in duplex austenitic/ferritic stainless steel that significantly impacts its toughness and corrosion resistance.

Recently Searched by other expert

Materials Testing

ASTM E572 Analysis of Stainless and Alloy Steels by WDXRF

ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.

ASTM D2674 Analysis of Sulfochromate Etch Solution

The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.

Antigenic Protein in Hevea Natural Rubber ASTM D6499

An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.

ASTM Standards

ASTM G65 Abrasion Test Using the Dry Sand/Rubber Wheel Apparatus

ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.

ASTM E2141 Accelerated Aging of Electrochromic Devices in Sealed Glass Units

ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.

ASTM C724 Acid Resistance of Ceramic Decoration on Architectural Glass

ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.

Send us a request

Just share your testing requirements and leave the rest on us!

Quick Turnaround and Hasslefree process
Confidentiality Guarantee
Free, No-obligation Consultation
100% Customer Satisfaction

Let us combine our capabilities to achieve success!!