ASTM A1108 Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams

ASTM A1108 method is related to corrugated steel structures with the ultimate strength of bolted seams. This method includes laboratory test procedures that indicate specimen preparation, test equipment, and data collection. The values are stated in inch-pound units.

Average 30% Cost
Savings
100% Confidentiality
Guarantee
Free, No-obligation
Consultation
100% Customer
Satisfaction

TRUSTED BY ENGINEERS FROM

Scope:

ASTM A1108 is necessary to determine the ultimate strength in compression of bolted longitudinal seams with lapped connections in deep corrugated structural plates. This test method is used to establish the maximum power of bolted structural plate longitudinal seams for design.

Test Procedure:

The ASTM A1108 test method prepares representative seamed specimens, tests them in compression, and normalizes the results. The test specimens are loaded in uniform compression along their top and bottom faces until failure. The normalization processes address differences between test specimens and installed structure seams.

Specimen size:

As per ASTM A1108, the specimens should consist of three complete standard length plate segments connected by standard circumferential seams, and the specimen length should be the centerline-to-centerline dimension between the outermost bolts.

Data:

The photograph obtained is interpreted to determine the ultimate strength of the deep corrugated structural plate bolted longitudinal lapped seams.

Conclusion:

ASTM A1108 is necessary to determine the ultimate strength in compression of bolted longitudinal seams with lapped connections in deep corrugated structural plates.

Recently Searched by other expert

Materials Testing

ASTM E572 Analysis of Stainless and Alloy Steels by WDXRF

ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.

ASTM D2674 Analysis of Sulfochromate Etch Solution

The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.

Antigenic Protein in Hevea Natural Rubber ASTM D6499

An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.

ASTM Standards

ASTM G65 Abrasion Test Using the Dry Sand/Rubber Wheel Apparatus

ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.

ASTM E2141 Accelerated Aging of Electrochromic Devices in Sealed Glass Units

ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.

ASTM C724 Acid Resistance of Ceramic Decoration on Architectural Glass

ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.

Send us a request

Just share your testing requirements and leave the rest on us!

Free, no-obligation consultation
Guaranteed confidentiality
Quick turnaround time
Hassle-free process

Let us combine our capabilities to achieve success!!