Thermal property testing includes testing a material’s thermal resistance, thermal resistivity, thermal conductivity, specific heat capacity, and thermal effusivity
Thermal Properties Testing Services
Thermal property testing includes testing a material’s thermal resistance, thermal resistivity, thermal conductivity, specific heat capacity, and thermal effusivity:
Thermal resistance is the ratio of the temperature difference between two sides of a material to the rate of heat flow per unit area. It is the property of a material to resist heat flow. In thermal resistance testing, the specimen is placed on a hot plate which is then placed in a chamber maintained at a specified relative humidity and comparatively lower temperature. The heat from the hot plate dissipates into the chamber through the specimen due to the temperature difference between the plate and chamber. The thermal resistance of the specimen is calculated by measuring the heat flow through it.
SHC testing measures the amount of energy required to raise the temperature of a unit mass of a specimen. It can be calculated by differential scanning calorimetry.
Common Uses of Thermal Properties Testing
Disadvantages of Thermal Properties Testing
Industrial Application of Thermal Properties Testing
Enter Sample and testing requirementsProvide your contact information
How Spectral Ellipsometry (SE) works: Figure 1: Plarization of a light beam after passing through a polarizer Light waves can...
Perovskite solar cells Like other thin-film technologies, perovskite solar cells have unique properties that make them attractive for reasons beyond...
3D printed OLED Display Researchers successfully 3D printed a flexible OLED display. This could allow anyone to mass-produce low-cost OLED...
EELS analysis of gate and channel is performed on fin field-effect transistors (finFETs). Scanning transmission electron…
FTIR analysis is used to study the migration and leaching of phthalate plasticizers from p-PVCs. Phthalate…
Nano-scale surface roughness is a critical parameter in fabricated thin-films that are used in optics, solar…
ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.
ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.
ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.
You share material and testing requirements with us
You ship your sample to us or arrange for us to pick it up.
We deliver the test report to your email.
Let’s work together!
Share your testing requirements with us and we will be happy to assist you.
What Material or product do you have?
What analysis do you need?
How many parts or coupons do you have?
How fast do you need the results back?
Do you know the goal of the analysis you need?