(888) 878-3090
IEEE 1725 and IEEE 1625 Battery Certification
CTIA accreditation is required of manufacturers who offer cells, batteries, adapters, and gadgets to the country’s top telecommunications companies. The Criteria for Reusable Batteries for Cellular Telephones are covered by CTIA IEEE 1725, whereas the Requirements for Rechargeable Battery for Laptop and Tablet Computers are covered by CTIA IEEE 1625. The contents of battery design, manufacture, installation, leaky protection, overcharge, mechanical properties, and quality control are also governed by these standards. The usage of batteries in consumer goods is increasing at an exponential rate. As a result, understanding lithium-ion battery safety became crucial for US importers.
Manufacturers have worked to extend battery working durations while lowering the total weight of the battery and the battery-powered device due to the proliferation of batteries and the shrinking of portable items. As a result, battery compositions that pack more energy into smaller packaging have emerged.
Video 01: Lithium Battery Testing
Implications:
hello@infinitalab.com
How Spectral Ellipsometry (SE) works: Figure 1: Plarization of a light beam after passing through a polarizer Light waves can...
Perovskite solar cells Like other thin-film technologies, perovskite solar cells have unique properties that make them attractive for reasons beyond...
3D printed OLED Display Researchers successfully 3D printed a flexible OLED display. This could allow anyone to mass-produce low-cost OLED...
Δ
EELS analysis of gate and channel is performed on fin field-effect transistors (finFETs). Scanning transmission electron…
FTIR analysis is used to study the migration and leaching of phthalate plasticizers from p-PVCs. Phthalate…
Nano-scale surface roughness is a critical parameter in fabricated thin-films that are used in optics, solar…
Start Testing
ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.
ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.
ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.
Subscribe now to keep reading and get access to the full archive.
Type your email…
Subscribe
Continue reading
What Material or product do you have?
What analysis do you need?
How many parts or coupons do you have?
How fast do you need the results back?
Do you know the goal of the analysis you need?
Contact Information