Flexural properties testing is used to measure the ability of composite materials to withstand bending forces. The test involves applying a load to a sample placed on two supports and then measuring the deflection of the sample. The results are used to determine the modulus of elasticity, flexural strength, and other important properties of the composite material.
Flexural Properties of Composites
Polymeric materials are used in a variety of applications, from medical devices to automotive parts. In order to determine their service or shelf life in different environments, these materials are subjected to accelerated aging tests. This testing allows for the selection of materials that can retain their qualities over time despite exposure to heat, pressure, or chemical attack. By elevating the test temperatures, it is possible to observe any physical or chemical changes that may occur due to oxidative and thermal aging.
Video 01:Flexure Test for composite materials
Enter Sample and testing requirementsProvide your contact information
How Spectral Ellipsometry (SE) works: Figure 1: Plarization of a light beam after passing through a polarizer Light waves can...
Perovskite solar cells Like other thin-film technologies, perovskite solar cells have unique properties that make them attractive for reasons beyond...
3D printed OLED Display Researchers successfully 3D printed a flexible OLED display. This could allow anyone to mass-produce low-cost OLED...
EELS analysis of gate and channel is performed on fin field-effect transistors (finFETs). Scanning transmission electron…
FTIR analysis is used to study the migration and leaching of phthalate plasticizers from p-PVCs. Phthalate…
Nano-scale surface roughness is a critical parameter in fabricated thin-films that are used in optics, solar…
ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.
ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.
ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.
You share material and testing requirements with us
You ship your sample to us or arrange for us to pick it up.
We deliver the test report to your email.
Let’s work together!
Share your testing requirements with us and we will be happy to assist you.
What Material or product do you have?
What analysis do you need?
How many parts or coupons do you have?
How fast do you need the results back?
Do you know the goal of the analysis you need?