ASTM D1876 is used to determine the relative peel resistance of adhesive bonds between flexible adherends using a T-type sample. Manufacturers use this quality control standard in a variety of industries where relative peel resistance across individual samples or various adhesive forms is required.
Scope:
ASTM D1876 test is used to determine the relative peel resistance of adhesive bonds between flexible adherends through a T-type sample. This test measure is also known as a T-peel owing to the shape of two flexible adherends as they are taken apart. Manufacturers use this quality control standard in a variety of industries as it is mainly designed to establish relative peel resistance across individual samples or various adhesive forms.
Test Procedure:
A universal testing machine is used. Each end of the T-peel sample is clamped in separate test grips of the machine. The sample is separated at a rate of 127 mm (5.0 inch) /min for 5 inches length of the bond line as per the guidelines.
Specimen size:
Samples are cut from a T-peel panel to 25.4 mm (1.0 inch) long by 300 mm (12 inches) wide. Ten samples are tested.ASTM D882 uses 1-inch 6 inches strips are die cut from thin sheets or film.
Data:
Peel Load
Peel Strength (lb/in)
Type of Failure
Metrology
A variety of microscopy and spectroscopy tools available for precise measurements from the nano to the meter scale.
Metrology Testing Services POPULAR TESTS:
Materials Testing
ASTM and ISO standard and custom chemical, mechanical, thermal, corrosion tests, etc. for all materials metals, ceramic or polymers.
Materials Testing Services POPULAR TESTS:Nondestructive Testing Electrical Testing Chemistry Analysis
Product Testing
Thousands of tests for product quality and reliability under heat, humidity, temperature shock, vibration, drop, electrostatic discharge.
Product Testing Services POPULAR TESTS:ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 is a standard test method for the analysis of sulfochromate etches solution used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
You share material and testing requirements with us
We ensure your sample pick-up in an ensured manner
We deliver test report to your inbox
Just share your testing requirements and leave the rest on us!
