ASTM E354-93 Chemical Analysis Iron, Nickel, and Cobalt Alloys

The standard test methods for the chemical analysis of high-temperature, electrical, magnetic, and other similar iron, nickel, and cobalt alloys are covered under the ASTM E354-93 standard test. These test methods for the chemical analysis of metals and alloys are primarily intended as referee methods to test such materials for compliance with compositional specifications.

Average 30% Cost
Savings
100% Confidentiality
Guarantee
Free, No-obligation
Consultation
100% Customer
Satisfaction

TRUSTED BY ENGINEERS FROM

Scope:

ASTM E354-93 standard method includes the test methods for chemical analysis of high-temperature iron, nickel, and cobalt alloys with demarcated chemical compositions. methanol. The test methods in this standard are contained under the sections as follows:

Test Methods	Sections
Manganese by the Periodate Photometric Method (0.05 to 2.00%)	8
Phosphorus by the Molybdenum Blue Photometric Method (0.002 to 0.08%)	18
Sulfur by the Combustion-Iodate Titration Method (0.005 to 0.1%)	37
Silicon by the Gravimetric Method (0.05 to 5.00%)	46
Cobalt by the Ion-Exchange-Potentiometric Titration Method (2 to 75%)	53
Cobalt by the Nitroso-R-Salt Photometric Method (0.10 to 5.0 %)	61
Copper by the Sulfide Precipitation-Electrodeposition Gravimetric Method (0.01 to 10.00 %)	71
Carbon, Total, by the Combustion Gravimetric Method (0.05 to 1.10%)	79
Copper by Neocuproine Photometric Method (0.01 to 10.00 %)	90
Aluminium, Total, by the 8-Quinolinol Gravimetric Method (0.20 to7.00%)	100
Nickel by the Dimethylglyoxime Gravimetric Method (0.1 to 84.0%)	135
Tin by the Solvent Extraction–Atomic Absorption Method (0.002 to 0.10%)	143
Molybdenum by the Photometric Method (0.01 to 1.50%)	153
Chromium by the Atomic Absorption Method (0.006 to 1.00%)	165
Chromium by the Peroxydisulfate Oxidation—Titration Method(0.10 to 33.00 %)	175
Molybdenum by the Ion Exchange 8-Hydroxyquinoline Gravimetric Method (1.5 to 30 %)	184
Iron by the Silver Reduction Titrimetric Method (1.0 to 50.0%)	192

Results:

Combustion gravimetric method is used determine the total carbon content. The sample is burned in a stream of oxygen, and the carbon dioxide in the evolved gases is collected in a suitable absorbent and weighed. The results obtained are as

Test Specimen	Percent Carbon
Monel-type alloy	0.080
High-speed steel	0.81
Nickel-base alloy	1.49

Recently Searched by other expert

Materials Testing

ASTM E572 Analysis of Stainless and Alloy Steels by WDXRF

ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.

ASTM D2674 Analysis of Sulfochromate Etch Solution

The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.

Antigenic Protein in Hevea Natural Rubber ASTM D6499

An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.

ASTM Standards

ASTM G65 Abrasion Test Using the Dry Sand/Rubber Wheel Apparatus

ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.

ASTM E2141 Accelerated Aging of Electrochromic Devices in Sealed Glass Units

ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.

ASTM C724 Acid Resistance of Ceramic Decoration on Architectural Glass

ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.

Send us a request

Just share your testing requirements and leave the rest on us!

Free, no-obligation consultation
Guaranteed confidentiality
Quick turnaround time
Hassle-free process

ASTM E354-93 Chemical Analysis Iron, Nickel, and Cobalt Alloys

ASTM E354-93 Chemical Analysis Iron, Nickel, and Cobalt Alloys

TRUSTED BY ENGINEERS FROM

Core Materials Testing Services

Looking for Material Testing?

Let us combine our capabilities to achieve success!!