ASTM D7513 The Capacity of Mixed Bed Ion Exchange Cartridges
ASTM D7513 determines the performance of mixed bed ion exchange resin cartridges in the active form when used for deionization. The values expressed in SI units are considered as standard.
Average 30% Cost Savings
100% Confidentiality Guarantee
Free, No-obligation Consultation
100% Customer Satisfaction
TRUSTED BY ENGINEERS FROM
ASTM D7513 The Capacity of Mixed Bed Ion Exchange Cartridges
ASTM D7513 determines the performance of mixed bed ion exchange resin cartridges in the active form when used for deionization. The values expressed in SI units are considered as standard.
Scope:
ASTM D7513 is used to determine the initial capacity of unused cartridges, evaluate unused mixed bed ion exchange cartridges for conformance to specifications, and calculate capacity on a cartridge basis. This test method is also important to test different mixed bed resin cartridges.
Procedure:
The ASTM D7513 test strategy is debilitating a cartridge of blended bed particle trade material to a particular endpoint with an influent arrangement of known synthesis and volume. The profluent conductivity of each volumetric augmentation equivalent to 2 Vc is measured and recorded. The process is continued until the 1.0 μS/cm value is achieved; then, at that point, the volume of the test water handled to a 1.0 μS/cm endpoint (V1) in liters is recorded.
Video 01: Working mechanism of a mixed bed ion exchanger
Specimen size:
Cartridge and pressure vessel are required.
Data:
The following data is calculated in ASTM D7513:
Capacity, meq/cartridge = C × VT
Where C is the concentration of total electrolytes in the test water expressed in mill equivalents per liter and VT is the volume of test water used, per cartridge, in liters.
Conclusion:
ASTM D7513 is used to determine the initial capacity of unused cartridges, evaluate unused mixed bed ion exchange cartridges for conformance to specifications, and calculate capacity on a cartridge basis.
ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 test is a standard test method for the analysis of sulfochromate etch solutions used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.
ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.
ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.
Send us a request
Process for testing
STEP 01
You share material and testing requirements with us
STEP 02
We ensure your sample pick-up in an ensured manner
STEP 03
We deliver test report to your inbox
Just share your testing requirements and leave the rest on us!
Free, no-obligation consultation
Guaranteed confidentiality
Quick turnaround time
Hassle-free process
Let us combine our capabilities to achieve success!!
