ASTM D4875 Polymerized Ethylene Oxide Content of Polyether Polyols
ASTM D4875 determines Polymerized Ethylene Oxide (EO) Content of Polyether Polyols. It comprises two test methods A and B. Test method A uses Proton Nuclear Magnetic Resonance Spectroscopy (H NMR), and test method B uses Carbon-13 NMR Spectroscopy (13C NMR). The values expressed in SI units should be considered standard.
ASTM D4875 is used to measure Polymerized Ethylene Oxide (EO) Content of Polyether Polyols. In the test method, measurements of EO content are connected to polyol reactivity (as a function of primary hydroxyl content), foam rise linearity, and polyol and final product hydrophilicity.
ASTM D4875 Standard Test Methods of Polyurethane Raw Materials: Polymerized Ethylene Oxide Content of Polyether Polyols is determined by the following methods.
Test Method A—1H NMR is used to measure polymerized EO content of ethylene oxide (EO) propylene oxide (PO) polyether polyols used in flexible polyurethane foams and non-foams. It is suitable for diols initiated from glycols of EO or PO containing EO percentages >5. For triols initiated with glycerol (glycerin) and trimethylolpropane, an uncorrected EO value.
Test Method B—13C NMR is used to measure the polymerized EO content of EO-PO polyether polyols used in flexible polyurethane foams and non-foams. It is suitable for diols and triols containing EO percentages >5 and made from the commonly used initiators.
Test method A
6.1 – 14.6
Test method B
15.1 – 21.1
A Fourier Transform NMR (FT-NMR) Spectrometer is used with 200 MHz or above the proton resonance frequency. High-Definition Carbon-13 capabilities Fourier-Transform NMR Spectrometer with a carbon-13 resonance frequency of 50 MHz.
ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 is a standard test method for the analysis of sulfochromate etches solution used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.
ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.
ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.
Send us a request
Process for testing
You share material and testing requirements with us
We ensure your sample pick-up in an ensured manner
We deliver test report to your inbox
Just share your testing requirements and leave the rest on us!