ASTM A500/A500M-21a Cold-Formed Welded and Seamless Carbon Steel Structural Tubing
ASTM A500/A500M-21a test method determines the use of cold-formed welded carbon and alloy steel tubing in structural tubing. The tubing of different shapes and grades is covered under this method. The final results of this method are displayed keeping in view the international standards and inch-pound units.
ASTM A500/A500M-21a test method covers the structural tubing and the use of cold-formed welded carbon and alloy steel tubing in it. The process proceeds with the quality check, heat treatment, and the testing chemical composition of materials. The results obtained from this method help in quality control, research, and performance evaluation of structural tubing. The use of Carbon steel alloys for constructing bridges and buildings is specified.
The specimen is manufactured as per the specified measurements, and limits are selected for the chemical composition of the material. The electric furnace or elemental oxygen makes steel, whereas a seamless welding process makes tubing. The analysis is done following the agreement between the purchaser and the producer. Tensile strength is measured, and heat treatment is applied. Then, a stress-corrosion resistance test is performed, and various alloys’ cracking capabilities are tested. The flattening test and the tension test are performed. The method also covers the packaging and certification.
Specimen size should be as per the requirements. In this case, the periphery of the specimen should be 88 inches or less, and thickness should be 1.0000 inches or less.
The method covers the certification, sampling, testing, and specimen inspection within the set limits. The heat treatment is applied to grade D materials.
THE ASTM A500/500M-21a test method is specifically essential for structural tubing quality assurance and durability. In this regard, the top service provider is the Infinita Lab, which ensures efficient and reliable testing.
ASTM E572 test method covers the analysis of stainless and alloy steels by Wavelength Dispersive X-ray Fluorescence Spectrometry (WDXRF). It provides rapid, multi-element determinations with sufficient accuracy to assure product quality.
The ASTM D2674 is a standard test method for the analysis of sulfochromate etches solution used in the surface preparation of aluminum. The ASTM D2674 standard specifies a method for determining the efficacy of an etchant used to prepare the surface of aluminum alloys for subsequent adhesive bonding.
An immunological method for quantization of Hevea Natural Rubber (HNRL) proteins using rabbit anti-HNRL serum. Rabbits immunized with HNRL proteins react to the majority of the proteins present, and their sera have the capability to detect most if not all the proteins in HNRL.
ASTM G65 measures the resistance of metallic materials to abrasion using the dry sand/rubber wheel apparatus. The quality, durability, and toughness of the sample are determined using this test. Metallic materials are ranked in their resistance to scratching abrasion under a controlled environment.
ASTM E2141 test methods provide accelerated aging and monitoring of the performance of time-dependent electrochromic devices (ECD) integrated in insulating glass units (IGU). This test helps to understand the relative serviceability of electrochromic glazings applied on ECD.
ASTM C724 test method is used in analyzing the quality and ease of maintenance of a ceramic decoration on architectural-type glass. This test method is useful in the acknowledgment of technical standards.
Send us a request
Process for testing
You share material and testing requirements with us
We ensure your sample pick-up in an ensured manner
We deliver test report to your inbox
Just share your testing requirements and leave the rest on us!