Pages
- About Us
- Apply Job
- ASTM SItemap
- Blog
- Case Study Sitemap
- category-sitemap
- Connect with an expert!
- Contact Us
- FAQs
- Get in touch with us!
- Home 2023
- Home new
- Infinita
- Life @ Infinita
- Material Testing Service Sitemap
- Materials Testing Catalogue
- Metrology Catalogue
- Metrology Testing Service Sitemap
- Partner Registration
- Partner with us
- Privacy Policy
- Product Testing Catalogue
- Product Testing Services Sitemap
- shipment-tracking
- Sitemap
- Sitemap
- Suggested Articles
- Terms & Conditions
- Terms and conditions for partner labs
- Thank you
- Tracking
- XML Sitemap
Posts by category
- Category: ASTM
- ASTM E408 Standard Test Method for Determination of Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
- ASTM E398 Standard Test Method for Water Vapor Transmission Rate (WVTR) of Sheet Materials Using Dynamic Relative Humidity Measurement
- ASTM B661 Heat Treatment of Magnesium Alloys
- ASTM E394 Standard Test Method for Determination of Iron in Trace Quantities Using the 1,10-Phenanthroline Method
- ASTM E389 Test Method for Particle Size or Screen Analysis at No. 4 (4.75 mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials
- ASTM E388 Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers
- ASTM E387 Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
- ASTM E385 Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
- ASTM E382 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
- ASTM D6160 Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials
- ASTM D1489 Nonvolatile Content of Aqueous Adhesives
- ASTM D1146 Standard Test Method for Blocking Point of Potentially Adhesive Layers
- ASTM D1084 Viscosity of Adhesives
- ASTM D6396 Standard Test Method for Pipe Thread Sealants on Pipe Tees
- ASTM D5657 Fluid Tightness Ability of Adhesives (Using Threaded Fasteners)
- ASTM E561 K-R Curve Determination
- ASTM E458 Heat of Ablation
- ASTM C958 Particle Size Distribution of Alumina or Quartz
- ASTM C867 Soluble Sulfate in Ceramic Whiteware Clays
- ASTM C866 Ceramic whiteware Clay Filtration Rate
- ASTM C837 Methylene Blue Index of Clay
- ASTM C721 Particle size of Alumina and Silica Powder
- ASTM C690 Alumina and Quartz powder Particle Size Distribution
- ASTM C657 D-C Volume Resistivity of Glass
- ASTM C598 Strain and Annealing Points of Glass
- ASTM E1673 Standard Test Method for Percent Suspensibility
- ASTM D6827 Method for Zinc Analysis of Floor Polishes and their Polymers by Flame Atomic Absorption
- ASTM D6814 Percent Devulcanization of Crumb Rubber Based on Crosslink Density
- Measuring Maximum Spontaneous Heating Temperature of Art ASTM D6801
- ASTM D6790/D6790M Determining Poisson’s Ratio of Honeycomb Cores
- ASTM D6785 Determination of Lead in Workplace Air Using Flame
- ASTM D6777 Relative Rigidity of Poly Vinyl Chloride Siding
- ASTM D6773 Test method For Bulk Solids Using Schulze Ring Shear Tester
- ASTM D6762 Determining the Hiding Power of Paint by Evaluation of Spray Coatings
- ASTM D6761 Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM D6746 Determination of Green Strength and Stress Relaxation of Raw Rubber
- ASTM D6745 Linear Thermal Expansion of Electrode Carbons
- ASTM D6744 Determination of the Thermal Conductivity of Anode Carbons
- ASTM D6741 Silanes Used in Rubber Formulations: Sulfur Content
- ASTM D6740 Silanes Used in Rubber Formulations: Residue on Ignition
- ASTM D6739 Standard test method for Silica – pH Value
- ASTM D6738 Method for Precipitated Silica – Volatile Content
- ASTM D6738 Method for Precipitated Silica – Volatile Content
- ASTM D6737 Bulk Density of Tapered Paintbrush Filaments
- ASTM D6736 Standard Test Method for Burnish Resistance of Latex Paints
- ASTM D6735 Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources
- ASTM D6734 Low Levels of Coliphages in Water
- ASTM D6731 Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer
- ASTM D6721 Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry
- ASTM D6703 Automated Heithaus Titrimetry
- ASTM D6691 Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium
- ASTM D6686 Evaluation of Tannin Stain Resistance of Coatings
- ASTM D6677 Evaluating Adhesion by Knife
- ASTM D6676/D6676M Cathodic Disbonding of Exterior Pipeline Coatings
- ASTM D6656 Determination of Chromic Oxide in Wet Blue
- ASTM D6653/D6653M Determining Effects of High Altitude on Packaging
- ASTM D 6647 Determining Acid Soluble Iron Via Atomic Absorption
- ASTM D 6646 Determining Hydrogen Sulfide Breakthrough Capacity
- ASTM D6601 Measurement of Cure and After-Cure Dynamic Properties by Rotorless Shear Rheometer
- ASTM D6595 Determination of Wear Metals in used Lubricating Oils
- ASTM D6585 Specification for Unsintered Polytetrafluoroethylene (PTFE)
- ASTM D6584 Total glycerides and glycerin in biodiesel methyl esters
- ASTM D6580Determination of Zinc in Zinc Dust and in Cured Films
- ASTM D6574 Determining Hydraulic Transmissivity of a Geosynthetic by Radial Flow
- ASTM D6569 Standard Test Method for On-Line Measurement of pH
- ASTM D6561 Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDI) in Air
- ASTM D6559 Determination of TGA Air Reactivity of Carbon Anodes and Cathode
- ASTM D6556 Total and External Surface Area by Nitrogen Adsorption
- ASTM D6539 Permeability of Unsaturated Porous Materials
- ASTM D6537 Instrumented Package Shock Testing
- Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument ASTM D7127
- ASTM E1165 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
- ASTM E1153 Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate, Hard, Nonporous Non-Food Contact Surfaces
- ASTM E1143 Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
- ASTM E1135 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
- ASTM E3047 Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry
- ASTM D870 Testing Water Resistance of Coatings Using Water Immersion
- ASTM D4585 Testing Water Resistance of Coatings Using Controlled Condensation
- ASTM D7213 Boiling Range Distribution of Petroleum Distillates by Gas Chromatography
- ASTM E415 Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
- ASTM E1019 Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys
- ASTM D3677 Rubber-Identification by Infrared Spectrophotometry
- ASTM D297 Rubber Products Chemical Analysis
- ASTM A653 Steel Sheet, Zinc-Coated or Zinc-Iron Alloy-Coated by the Hot-Dip Process
- ASTM D3335 Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
- ASTM A6 General Requirements for Rolled Structural Steel Bars and Sheet Pilling
- ASTM D4708 Standard Practice for the Preparation of Uniform Free Films of Organic Coatings
- ASTM C1217 Equipment for Processing Nuclear and Radioactive Materials
- ASTM A480 general requirements for flat rolled stainless and heat resisting steel plate
- ASTM F390 Sheet Resistance of Thin Metallic Films
- ASTM D7169 Standard Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography (GC)
- ASTM D2369 Volatile Content of Coatings
- ASTM D1653 Water Vapor Transmission of Organic Coating Films
- ASTM G8 Cathodic Disbonding of Pipeline Coatings
- ASTM E393 Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters
- ASTM D6868 Labeling of End Items that Incorporate Plastics as Additives with Paper and Other Substrates Designed to be Aerobically Composted in Industrial Facilities
- ASTM D6400 Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities
- ASTM D446 Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
- ASTM E4 Practices for Force Calibration and Verification of Testing Machines
- ASTM D3335 Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
- ASTM F2792 Standard Terminology for Additive Manufacturing Technologies
- ASTM E505 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
- ASTM A487 Steel Castings Suitable for Pressure Service
- ASTM C1249 Secondary Seal for Sealed Insulating Glass Units
- ASTM C384 Absorption of Acoustical Materials by Impedance Tube Method
- ASTM A976 Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability
- ASTM F1970 Specification for Special Engineered Fittings, Valves for use in Poly Vinyl Chloride (PVC) or Chlorinated Poly (VC) Systems
- ASTM A1030 Practice for Measuring Flatness Characteristics of Steel Sheet Products
- ASTM F1160 Shear and Bending Fatigue Testing of Calcium Phosphate and Composite Calcium Phosphate/Metallic Coatings
- ASTM G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- ASTM C267 Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
- ASTM D5233 Single Batch Extraction Method for Wastes
- ASTM D2239 Polyethylene Plastic Pipe Based on Controlled Inside Diameter
- ASTM D721 Oil Content of Petroleum Waxes
- ASTM D2266 Wear Preventive Characteristics of Lubricating Grease
- ASTM D774/D774M Bursting Strength of Paper
- ASTM D897 Tensile Properties of Adhesive Bonds
- ASTM E18 Test Methods for Rockwell Hardness of Metallic Materials
- ASTM D4428 Test Methods for Crosshole Seismic Testing
- ASTM B49 Copper Rod for Electrical Purposes
- ASTM G46 Examination and Evaluation of Pitting Corrosion
- ASTM A106 Specification for Seamless Carbon Steel Pipe for High-Temperature Service
- ASTM E385 Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
- ASTM C20 Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
- ASTM E1587 Chemical Analysis of Refined Nickel
- ASTM D3720 Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
- ASTM E1623 Determination of Fire and Thermal Parameters of Materials using Intermediate Scale Calorimeter (ICAL)
- ASTM E1618 Ignitable Liquid Residues in Extracts from Fire Debris Samples
- ASTM E1616-08 Analysis of Acetic Anhydride Using Gas Chromatography
- ASTM E1613 Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry
- ASTM E1600 Determination of Gold in Cyanide Solutions by Flame Atomic Absorption Spectrometry
- ASTM E1584 Assay of Nitric Acid
- ASTM E1569 Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique
- ASTM E1568 Determination of Gold in Activated Carbon by Fire Assay Gravimetry
- ASTM E1560 Gravimetric Determination of Nonvolatile Residue from Cleanroom Wipers
- ASTM E1559 Contamination Outgassing Characteristics of Spacecraft Materials
- ASTM E1131 Standard Test Method for Compositional Analysis by Thermogravimetry
- ASTM E112 Standard Test Methods for Determining Average Grain Size
- ASTM E1115-11 Standard Test Method for Evaluation of Surgical Hand Scrub Formulations
- ASTM E1108 Standard Test Method for Determination of the Recovery of a Product in a Materials Separation Device
- ASTM E1106 Standard Test Method for Primary Calibration of Acoustic Emission Sensors
- ASTM E1090 Standard Test Method For Dicumyl Peroxide And Dicumyl Peroxide Decomposition Products In Resins
- ASTM E906/E906M Standard Test Method For Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
- ASTM E905 Standard Test Method For Determining Thermal Performance Of Tracking Concentrating Solar Collectors
- ASTM E903 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
- ASTM E898 Standard Test Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances
- ASTM E878 Standard Method for Determination Of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
- ASTM D7025 Assessing Clean Flax Fiber Fineness
- ASTM D6415 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer Matrix Composite
- ASTM D6395 Flatwise Flexural Impact Resistance
- ASTM D6387 Capillary Gas Chromatography
- ASTM E1251 Analysis of Aluminium and Aluminium Alloys by Spark Atomic Emission Spectrometry
- ASTM E1232 Temperature Limit of Flammability of Chemicals
- ASTM E1228 Assay of Peroxy Esters- Catalyzed Iodometric Procedure
- ASTM E1225 Thermal Conductivity of Solids Using the Guarded – Comparative-Longitudinal Heat Flow Technique
- ASTM D1709 Impact Resistance of Plastic Film by the Free-Falling Dart Method
- ASTM D2582 Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
- ASTM D5800 Evaporation Loss of Lubricating Oils by the Noack Method
- ASTM D129 Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)
- ASTM E299 Trace Amounts of Peroxides In Organic Solvents
- ASTM E139 Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metals
- ASTM A351 Castings, Austenitic, for Pressure-Containing Parts
- ASTM A388 Ultrasonic Examinations of Steel Forgings
- ASTM D3172 Standard Test Method for Proximate Analysis of Coal and Coke
- ASTM C1876 Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
- ASTM D3171 Standard Test Method for Constituent Content of Composite Materials
- ASTM E1213 Minimum Resolvable Temperature Difference for Thermal Imaging Systems
- ASTM E1178 Analysis of Acrylonitrile
- ASTM E1175 Determining Solar or Photopic Reflectance, Transmittance, and Absorption of Materials
- ASTM E1174 Evaluation of the Effectiveness of Health Care Personnel Hand-wash Formulations
- ASTM E1171 Photovoltaic Modules in Cyclic Temperature and Humidity Environments
- ISO-75 Determination of Temperature of Deflection Under Load
- ASTM A572/A572M High-Strength Low-Alloy Columbium-Vanadium Structural Steel
- ASTM A709/A709M Specification for Structural Steel for Bridges
- ASTM A105/A105M Carbon Steel Forgings for Piping Applications
- ASTM A269/A269M Seamless and Welded Austenitic Stainless Steel Tubing
- ASTM C920 Specification for Elastomeric Joint Sealants
- ASTM A615/A615M Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
- ASTM C109/C109M Compressive Strength of Hydraulic Cement Mortars
- ASTM C94/C94M Specification for Ready-Mixed Concrete
- ASTM A123/A123M Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
- ASTM D4169 Performance Testing of Shipping Containers and Systems
- ASTM B545 Standard Specification for Electrodeposited Coatings of Tin
- ASTM D638 Tensile Properties of Plastics
- ASTM F7 Standard Specification for Aluminum Oxide Powder
- ASTM D6992 Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method.
- ASTM C633 Adhesion or Cohesion Strength of Thermal Spray Coatings
- ASTM D5154/D5154M Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Micro Activity Test
- ASTM A980/A980M Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
- ASTM A109/A109M Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
- ASTM D3034 for Type PSM PVC Sewer Pipe and Fittings
- ASTM F963 Consumer Safety Specification for Toy Safety
- ASTM A479 Stainless Steel Bars and Shapes for Use in Boilers and other Pressure Vessels
- ASTM E1311 Minimum Detectable Temperature Difference for Thermal Imaging Systems
- ASTM E1277 Chemical Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry.
- ASTM E1270 Standard Test Method for Equal Arm Balances
- ASTM E1260 Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
- ASTM E1258 Airflow Calibration of Fan Pressurization Devices
- ASTM E1256 Radiation Thermometers (Single Waveband Type)
- ASTM E1409 Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys
- ASTM E1458 Calibration Verification of Laser Diffraction Instruments
- ASTM E1382 Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
- ASTM E1363 Temperature Calibration of Thermo mechanical Analyzers
- ASTM E1362 Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
- ASTM E1349 Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry
- ASTM E1348 Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
- ASTM E1347 Color-Difference Measurement by Tristimulus Colorimetry
- ASTM E1331 Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
- ASTM E1317 Flammability of Marine Surface Finishes
- ASTM E1473 Chemical Analysis of Nickel, Cobalt, Manganese, Sulfur
- ASTM E1462 Insulation Integrity Continuity of Photovoltaic Modules
- ASTM E1461 Thermal Diffusivity by the Flash Method
- ASTM E1447 Evaluating Hydrogen in Titanium and its Alloys
- ASTM E1457 Measuring Creep Crack Growth Times and Rates in Metals
- ASTM E1428 Evaluating the Performance of Antimicrobials
- ASTM E1426 Determining the Effective Elastic Parameter for X-Ray
- ASTM E1416 Radioscopic Examination of Weldments
- ASTM E1552 Hafnium in Zirconium by Atomic Emission Spectrometry
- ASTM E1545 Glass Transition Temperature by Thermomechanical Analysis
- ASTM E1543 Noise Equivalent Temperature Difference of Thermal Imaging Systems
- ASTM E1521 Liquid Holding Capacity of Granular Carriers
- ASTM E1520 Particle Counts of Granular Carriers
- ASTM E1477 Luminous Reflectance Factor of Acoustical Materials
- ASTM D7565/D7565M Standard Method for Measuring Tensile Properties of Fiber-Reinforced Polymer (FRP) Matrix Composites
- ASTM D6132 Measurement of Dry Film Thickness using an Ultrasonic Gauge
- ASTM D6130 Determination of Silicon by Inductively Coupled Plasma – Atomic Emission Spectroscopy
- ASTM D6129 Determination of Silicon in Engine Coolant by Atomic Absorption Spectroscopy
- ASTM D6128 Shear Testing of Bulk Solids Using the Jenike Shear Cell
- ASTM D6120 Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
- ASTM D6116 Test Method for Blocking
- ASTM D6059 The concentration of Airborne Single-Crystal Ceramic Whiskers
- ASTM D6053 Volatile Organic Compound Content of Electrical Insulating Varnishes
- ASTM D6071 Standard Test Method for Low-Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
- ASTM D6070 Standard Test Method for Physical Properties of the Smooth Wall, Compilable, Polyethylene for Preassembled Wire and Cable
- ASTM D6068 Determining J-R Curves of Plastic Materials
- ASTM D6050 Determination of Insoluble Solids in Organic Liquid
- MIL-STD-464 Testing
- MIL-STD 810 Testing
- ASTM D6115 Delamination of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM D6113 Using Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials
- ASTM D6112 Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber
- ASTM D6111 Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement
- ASTM D6109 Flexural Properties of Unreinforced and Reinforced Plastic Lumber
- ASTM D7574 Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
- ASTM D6108 Compressive Properties of Plastic Lumber and Shapes
- ASTM D6098 Specification for Extruded and Compressions Molded Shapes made from PC
- ASTM D6097 Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Materials
- ASTM D6095 Volume Resistivity for Crosslinked and Thermoplastic Conductor
- ASTM D6093 Percent Volume Nonvolatile Matter using Helium Gas Pycnometer
- ASTM D6090 Softening Point Resins (Mettler Cup and Ball Method)
- ASTM D6084 Elastic Recovery of Asphalt Materials by Ductilometer
- ASTM D6082 Standard Test for High-Temperature Foaming Characteristics of Lubricating Oils
- ASTM D6081 Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
- ASTM D6080 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
- ASTM D6073 Relative Setting of Heatset Printing Inks by the Heatset Tester
- ASTM C177 VS ASTM C518
- ASTM D6049 Test Method for Rubber Property Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
- ASTM D6047 Test Methods for Rubber
- ASTM D6041 Specification for Contact-Molded Fiberglass
- ASTM D6038 Determining the Compatibility of Solvent Mixtures
- ASTM D6037 Dry Abrasion Mar Resistance of Glass Coating
- ASTM D6036 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements
- ASTM D5996 Measuring Anionic Contaminants in Water by On-Line Ion Chromatography
- ASTM D6022 Calculation of Permanent Shear Stability Index
- ASTM D6011 Determining the Performance of a Sonic Thermometer
- ASTM D6007 Determining Formaldehyde Concentrations in Air
- ASTM D6005 Determining Slump Resistance of Carpet Adhesives
- ASTM D5997 On-Line Monitoring of Carbon in Water
- ASTM F2150 Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products
- ASTM D5996 Measuring Anionic Contaminants in Water by On-Line Ion Chromatography
- ASTM D6040 Standard Test Method for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film
- ASTM D5994/D5994M Measuring Core Thickness of Textured Geomembranes
- ASTM C241/C241M Test for Abrasion Resistance of Stone Subjected to Foot Traffic
- ASTM E238 Test Method for Pin-Type Bearing Test of Metallic Materials
- ASTM G151 Standard Guide for Exposing Nonmetallic Materials in Accelerated Test Devices that use Laboratory Light Sources
- ASTM E407 Standard Practice for Microetching Metals and Alloys
- ASTM A247 Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
- ASTM E814 Standard Test Method for Fire Tests of Penetration Firestop Systems
- ASTM D3065 Standard Test Methods for Flammability of Aerosol Products
- MIL-STD 810, Method 516
- IEEE 299 Testing Standard
- Liquid Chromatography (LC) Testing
- SAE j2527 – Society of Automotive Engineers Standard
- Compression Set
- Heat Aging Testing Services
- Automotive Volatile Organic Compound (VOC) Testing
- ASTM C127 Relative Density (Specific Gravity) and Absorption of Coarse Aggregates
- ASTM D6653/D6653M-13 Determining the Effects of High Altitude on Packaging Systems by Vacuum Method.
- ASTM E1820-21 Standard test method for measurement of fracture toughness
- ASTM E1805-21 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry
- ASTM E1787-16 Standard test method for Anions in Caustic Soda and Caustic Potash by Ion Chromatography
- ASTM E1788-16 Standard test method for Acidity in Acrylonitrile
- ASTM E1784-08 Total Peroxides in Acrylonitrile
- ASTM E1782-14 Determination of Vapour Pressure by Thermal Analysis
- ASTM E1771-07 Determination of Copper in Anode and Blister Copper
- ASTM E1754-17a Determination of low levels of Water in Liquid Chlorine by Infrared Spectrophotometry
- ASTM E1709-09 Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at 0.2 Degree Observation Angle
- ASTM E1710-18 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
- ASTM E1725-19 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
- ASTM E1735-19 Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25MeV
- ASTM E1740-22 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
- ASTM E1746-17a Sampling and Analysis of Liquid Chlorine for Gaseous impurities
- ASTM E1681-03 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
- ASTM E1659-12 Method for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
- ASTM E1641-13 Method for Decomposition Kinetics by Thermogravimetry using the Ozawa/Flynn/Wall Method
- ASTM E1640-13 Method for Assignment of the Glass Transition Temperature by Dynamic Mechanical Analysis
- ASTM D6531 Tinting Strength of Aqueous Ink Systems
- ASTM D6502 Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by XRF
- ASTM D6499-12 Antigenic Protein in Natural Rubber and its Products
- ASTM D6484 Open-Hole Compressive Strength of Polymer Matrix
- ASTM D6480-05 Test method for determining asbestos in samples wiped from surfaces
- ASTM D6474-12 Molecular Weight Distribution and Averages of Polyolefins
- ASTM D6442 Copper Release Rate From Antifouling Coatings
- ASTM D5155-19 Determination of the Isocyanate Content of Aromatic Isocyanates
- ASTM D4890-18 Determination of Gardner and APHA Color of Polyols
- ASTM D4878 Determination of Viscosity of Polyols
- ASTM D4877 Determination of APHA Color in Isocyanates
- ASTM D4671 Determination of Unsaturation of Polyols
- ASTM D4875 Polymerized Ethylene Oxide Content of Polyether Polyols
- ASTM D4672 Determination of Water Content of Polyols
- ASTM D5988-18 Determining Aerobic Biodegradation of Plastic Materials in Soil
- ASTM D5526-18 Biodegradation of Plastic Under Accelerated Landfill Conditions
- ASTM D5511-18 Biodegradation of Plastic Under High-Solids Anaerobic Conditions
- ASTM D5338-15 Determining Aerobic Biodegradation of Plastic Materials
- ASTM D1042-12 Standard test for Changes of Plastics Caused by Exposure to Heat and Moisture
- ASTM D570 Water absorption of plastics
- ASTM D8036-16 Determination of dimer ratio in pure MDI
- ASTM D7253-16 Determination of Acidity as Acid Number for Polyether Polyols
- ASTM D7252-17 Determination of Monomer and Isomers in Isocyanates
- ASTM D7133-21 Tristimulus CIELAB Color and Yellowness Index of Liquids
- ASTM C773 Compressive Strength of Fired Whiteware Materials
- ASTM E824–10 Transfer of Calibration from Reference to Field Radiometers
- ASTM E816-05 Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
- ASTM E815−11 Determination of Calcium Fluoride in Fluorspar by Complexometric Titrimetry
- ASTM E806−08 Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)
- ASTM E794−06 Melting and Crystallization Temperatures by Thermal Analysis
- ASTM E793−06 Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
- ASTM E780–06 Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples, and Thermocouple Cable at Room Temperature
- ASTM E756-05 Measuring Vibration-Damping Properties of Materials
- ASTM E738-11 Aluminum in Iron Ores by EDTA Complexometric Titrimetry
- ASTM E736-00 Cohesion/Adhesion of Fire-Resistive Materials
- ASTM E680-79 Drop Weight Impact Sensitivity of Hazardous Materials
- ASTM E662-14 Specific Optical Density of Smoke
- ASTM E648 Critical Radiant Flux of Floor-Covering Systems
- ASTM E647 − 13a Measurement of Fatigue Crack Growth Rates
- ASTM E646 − 07 Tensile Strain-Hardening Exponents of Metal
- ASTM E644 − 11 Testing Industrial Resistance Thermometers
- ASTM E643 − 09 Ball Punch Deformation of Metallic Sheet Material
- ASTM E640 − 06 Preservatives in Water-Containing Cosmetics
- ASTM E637 – 05 Calculation of Stagnation Enthalpy
- ASTM E618 – 07 Evaluating Machining Performance
- ASTM E606/E606M – 12 Strain-Controlled Fatigue Testing
- ASTM E605 – 93 Thickness and Density of Sprayed Fire-Resistive Material
- ASTM E604 – 83 Tear Testing of Metallic Materials
- ASTM E601-07a Measuring Electromotive Force Stability of Base-Metal Thermoelement Materials
- ASTM E598-08 Measuring Extreme Heat-Transfer Rates from High-Energy Environments
- ASTM E596-96 Laboratory Measurement of Noise Reduction of Sound- Isolating Enclosures
- ASTM E595-07 Total Mass Loss and Collected Volatile Condensable Materials from Outgassing
- ASTM E581-10 Chemical Analysis of Manganese-Copper Alloys
- ASTM E579-04 Limit of Detection of Fluorescence of Quinine Sulfate in Solution
- ASTM E578-07 Linearity of Fluorescence Measuring Systems
- ASTM E572-13 Analysis of steel alloys by fluorescence spectrometry
- ASTM E556-11 Calibrating a Wheel Force by using Calibration Platform
- ASTM E576-08 Frost/dew point of sealed insulating glass
- ASTM E561-10 Standard test for K-R curve determination
- ASTM E534 – 13 Chemical Analysis of Sodium Chloride
- ASTM E537 – 12 Thermal Stability of Chemicals by Differential Scanning Calorimetry
- ASTM E536 – 08 Chemical Analysis of Zinc and Zinc Alloys
- ASTM E 517 – 00 Plastic Strain Ratio r for Sheet Metal
- ASTM E511 – 07 Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
- ASTM E508 – 13 Calcium and Magnesium determination in Iron Ores by Flame Atomic Absorption Spectrometry
- ASTM E539 – 11 Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry
- ASTM E545-14 Image Quality in Neutron by Radiographic Examination
- ASTM E507 – 13 Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
- ASTM E502 – 07 Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
- ASTM E478 – 08 Standard Test Methods for Chemical Analysis of Copper Alloys
- ASTM E477 – 13 Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
- ASTM E475 – 10 Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography
- ASTM E 471–96 Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
- ASTM E465 – 11 Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry
- ASTM D6975 – 04 test method for Cummins M11 Exhaust Gas Recirculation Test (EGR)
- ASTM E463 – 09 Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrometry
- ASTM D7109-12 Shear Stability of Polymer Containing Fluids
- ASTM D7105-06 Determining the Adhesive and Cohesive Strength
- ASTM D7093-13 Formability of thin-film organic coatings on Steel
- ASTM D7087-05a An Imaging Technique to Measure Rust Creepage at Scribe
- ASTM D7035-10 Analysis of airborne particulate matter for metals and metalloids by ICP-AES
- ASTM D7030-04 Short Term Creep Performance of Corrugated Fibreboard Containers under constant load
- ASTM D7029-09 Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0°F (82.2°C)
- ASTM D7028-07 Glass Transition Temperature of Polymer Matrix Composites
- ASTM D7027-13 Evaluation of Scratch Resistance of Polymeric Coatings and Plastics
- ASTM D6991-05 Measurement of Internal Stresses in Organic Coatings
- ASTM D6943-10 Immersion testing of industrial Protective coatings
- ASTM 6906-12a Determination of titanium treatment weight on metal substrates
- ASTM D6905-03 Impact Flexibility of Organic Coatings
- ASTM D6903-07 Methods for Determination of Organic Biocide Release Rate from Antifouling Coatings in Substitute Ocean Water
- ASTM D6902-04 Test method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
- ASTM D6875-12 Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor
- ASTM D6869-03 Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
- ASTM D6866-12 Biobased content determination of solid, liquid and gaseous samples using radiocarbon analysis
- ASTM D6855-12 Method for Determination of Turbidity Below 5 NTU in Static Mode
- ASTM D6845-12 Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
- ASTM D6844-10 Test Method for silanes used in rubber formulations
- ASTM D6843-10 Method used for silanes and is used in rubber formulations
- ASTM D6834-02 Test method for determining Product Leakage from a Package with a Mechanical Pump Dispenser
- ASTM D6979-18 Basicity in Polyols, Expressed as Percent Nitrogen
- ASTM D6437 Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols)
- ASTM D6226-21 Open Cell Content of Rigid Cellular Plastics
- ASTM D6099-18 Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
- ASTM D5672 Testing Flexible Cellular Materials Measurement of Indentation Force Deflection
- ASTM D5629-16 Determination of Acidity in Low-Acidity Aromatic Isocyanates and polyurethane
- ASTM D5523-21 Acidity by Argentometric Determination of Hydrolyzable Chlorine in Aromatic Isocyanates
- ASTM D4889-21 Determination of Viscosity of Crude or Modified Isocyanates
- ASTM A572/A572M-21 High-Strength Low-Alloy Columbium-Vanadium Structural Steel
- ASTM A709/A709M-21 Specification for Structural Steel for Bridges
- ASTM A105/A105M-21 Carbon Steel Forgings for Piping Applications
- ASTM A269/A269M-15a Seamless and Welded Austenitic Stainless Steel Tubing
- ASTM C920-18 Specification for Elastomeric Joint Sealants
- ASTM A615/A615M-20 Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
- ASTM C109/C109M-21 Compressive Strength of Hydraulic Cement Mortars
- ASTM C94/C94M-21b Specification for Ready-Mixed Concrete
- ASTM A123/A123M-17 Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
- ASTM D4169-22 Performance Testing of Shipping Containers and Systems
- ASTM D3034-21 Type PSM PVC Sewer Pipe and Fittings
- ASTM F963-17 Consumer Safety Specification for Toy Safety
- ASTM A500/A500M-21a Cold-Formed Welded and Seamless Carbon Steel Structural Tubing
- ASTM C136/C136M –19 Method for Sieve Analysis of Fine and Coarse Aggregates
- ASTM A574M-12 Alloy Steel Socket-Head Cap Screws
- ASTM D2000-18 Rubber Products in Automotive Applications
- ASTM D1557 Soil Compaction Characteristics in the Laboratory
- ASTM A182/A182M-21 Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
- ASTM F2413-18 Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear
- ASTM E1417/E1417M-21e1 Standard Practice for Liquid Penetrant Testing
- ASTM D3330/D3330M-04 Test for Peel Adhesion of Pressure-Sensitive Tape
- ASTM A677-16 Specification for Nonoriented Electrical Steel, Fully Processed Types
- ASTM A683-16 Specification for Semiprocessed Non-Oriented Electrical Steel
- ASTM F2100-19 Specification for Performance of Materials Used in Medical Face Masks
- ASTM A370-21 Test Methods and Definitions for Mechanical Testing of Steel Products
- ASTM A1085/A1085M-15 Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
- ASTM F3502-21 Standard Specification for Barrier Face Coverings
- ASTM C39/C39M-21 Compressive Strength of Cylindrical Concrete Specimens
- ASTM A108-18 Steel Bar, Carbon and Alloy, Cold-Finished
- ASTM A513/A513M-20a Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
- ASTM B221-21 Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
- ASTM A276-10 Standard Specification for Stainless Steel Bars and Shapes
- ASTM D698-12 Laboratory Compaction Characteristics of Soil
- ASTM A240 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and General Applications
- ASTM B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
- ASTM C33 Method for Standard Specification for Concrete Aggregates
- ASTM A967/A967M-17 Chemical Passivation Treatments for Stainless Steel Parts
- ASTM E415 Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
- ASTM A307– 21 Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI
- ASTM D4236 Standard Practice for Labeling Art Materials for Chronic Health Hazards
- ASTM A53/53M-20 Standard Specification for Pipe
- ASTM B209 Method for Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
- ASTM A36 Method for Standard Specification for Carbon Structural Steel
- ASTM D6319 Standard Specification for Nitrile Examination Gloves for Medical Application
- ASTM E363-09 Chemical Analysis of Chromium and Ferrochromium
- ASTM E359-10 Analysis of Soda Ash (Sodium Carbonate)
- ASTM E354-93 Chemical Analysis Iron, Nickel, and Cobalt Alloys
- ASTM E353-93 Chemical Analysis of Stainless, Heat Resisting, Maraging Steel and Other Similar Alloys
- ASTM E342-11 Test method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry.
- ASTM E352-13 Chemical Analysis of Tool Steels
- ASTM E351-13 Chemical Analysis of Cast Iron
- ASTM E350-12 Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
- ASTM E346 Analysis of Methanol
- ASTM E345-93 Standard test method for Tension Testing of Metallic Foil
- ASTM E340 -13 Test method for Macroetching Metals and Alloys
- ASTM E337-02 Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperature)
- ASTM E 328-13 Standard test method for Stress Relaxation for Materials and Structures
- ASTM E314-10 Test method for Determination of Manganese in Iron Ores by Pyrophosphate (Potentiometric) and Periodate (Photometric) Techniques
- ASTM E307-72 Standard Test Method for Normal Spectral Emittance at Elevated temperatures
- ASTM E299-08 Test Method for Trace Amounts of Peroxides in Organic Solvents
- ASTM E303 – 93 Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
- ASTM E298-08 Standard Test Methods for Assay of Organic Peroxides
- ASTM E322-12 Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry
- ASTM E289 – 04 Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
- ASTM E285-08 Method Oxyacetylene Ablation Testing of Thermal Insulation Meterials
- ASTM E279 – 97 Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test
- ASTM E278-01 Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry
- ASTM E258-07 Method Total Nitrogen in Organic Materials by Modified Kjeldahl Method
- ASTM E256-09 Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition
- ASTM D6385-99 Test for Determining Acid-Extractable Content in Activated Carbon by Ashing
- ASTM D6370-99 Compositional Analysis of Rubber by Thermogravimetry (TGA)
- ASTM D6355 -07 Test for Human Repeat Insult Patch Testing of Medical Gloves
- ASTM D6252-98 Test for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
- ASTM D6295-98 Test for Dispensability of Light–Duty Pressure–Sensitive Film Tape
- ASTM D6290-98e1 Test for Color Determination of Plastic Pellets
- ASTM D6284-09 Effects of Chlorine Compounds on rubber
- ASTM D6264-17 Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
- ASTM D6289-13 Test for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
- ASTM D6279-15 Test for Rub Abrasion Mar Resistance of High Gloss Coatings
- ASTM D6267-13 Test for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
- ASTM D6248-98 Test for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
- ASTM D6238-13 Test for Total Oxygen Demand in Water
- ASTM D6266-00 Test for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device
- ASTM D6209-13 Test to determine Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air.
- ASTM D6208-97 Test for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
- ASTM D6204-19a Measurement of Unvulcanized Rheological Properties of Rubber Using Rotorless Shear Rheometers
- ASTM D6203-06 Test for Thermal Stability of Way Lubricants
- ASTM D6194-18 Test for Glow-Wire Ignition of Materials
- ASTM D6191-97 Test to Measure Evolved Formaldehyde from Water Reducible Air-Dry Coatings
- ASTM D6188 Test for Viscosity of Cellulose by Cuprammonium Ball Fall
- ASTM C1466 Test for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted From Ceramic Foodware
- ASTM C1300 Test for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
- ASTM C949 Test for Porosity in Vitreous Whitewares by Dye Penetration
- ASTM C849 Test for Knoop Indentation Hardness of Ceramic Whitewares
- ASTM C848 Test for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance
- ASTM C373 Test for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products, Ceramic Tiles, and Glass Tiles
- ASTM C556 Test for Resistance of Overglaze Decorations to Attack by Detergents
- ASTM C554 Test for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method
- ASTM C424 Test for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
- ASTM C738 Test for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
- ASTM C584 Test for Specular Gloss of Glazed Ceramic Whitewares and Related Products
- ASTM C408 Test for Thermal Conductivity of Whiteware Ceramics
- ASTM C372 Test for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by Dilatometer Method
- ASTM C1525-18 Determining Thermal Shock Resistance of Advanced Ceramics by Water Quenching
- ASTM C370 Test for Moisture Expansion of Fired Whiteware Products
- ASTM C368 Test for Impact Resistance of Ceramic Tableware
- ASTM C1834 Test for Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing at Elevated Temperatures
- ASTM C1684 Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
- ASTM C1576 Test for Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing at Ambient Temperature
- ASTM C1499 Test for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1495 Test for Effects of Surface Grinding on Flexure Strength of Advanced Ceramics
- ASTM C1465 Test for Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
- ASTM E353 Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
- ASTM E2472 Test to Determine Resistance of Metals to Stable Crack Extension
- ASTM E1681 Test for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metals
- ASTM E1457-19e1 Test for Measurement of Creep Crack Growth Times in Metals
- ASTM E1221 Test for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
- ASTM E23 Test for Notched Bar Impact Testing of Metals
- ASTM E1304 Test for Plane-Strain (Chevron-Notch) Fracture Toughness of Metals
- ASTM E1820 Standard Test Method for Measurement of Fracture Toughness
- ASTM E399 Standard Test for Linear-Elastic Plane-Strain Fracture Toughness of Metals
- ASTM E2760-19e1 Standard Test Method for Creep-Fatigue Crack Growth Testing
- ASTM E647 Test for Measurement of Fatigue Crack Growth Rates
- ASTM E606 / E606M Test for Strain-Controlled Fatigue Testing
- ASTM E110 Test for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
- ASTM E384 Test for Microindentation Hardness of Materials
- ASTM E18 Test for Rockwell Hardness of Metallic materials
- ASTM E10 Test for Brinell Hardness of Metallic Materials
- ASTM E1876 Test for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio by Impulse Excitation of Vibration
- ASTM E1875 Test for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio by Sonic Resonance
- ASTM E143 Test for Shear Modulus at Room Temperature
- ASTM E111 Test for Young’s Modulus, Tangent Modulus, and Chord Modulus
- ASTM E238 Test for Pin-Type Bearing Test of Metals
- ASTM E9 Compression Testing of Metallic Materials at Room Temperature
- ASTM E292 Conducting Time-for-Rupture Notch Tension Tests of Materials
- ASTM E1450 Test for Tension Testing of Structural Alloys in Liquid Helium
- ASTM E21 Test for Elevated Temperature Tension Tests of Metallic Materials
- ASTM C1862 Test for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperature
- ASTM E8/E8M Test for Tension Testing of Metallic Materials
- ASTM E70 Determination of the pH of Aqueous Solutions with the Glass Electrode
- ASTM D7867 Measurement of Rotational Viscosity of liquid
- ASTM D7786 Determining Enamel Holdout
- ASTM D7773 Determination of Volatile Inorganic Acids
- ASTM D6186 Oxidation Induction Time of Lubricating Oils
- ASTM D6184 Oil Separation from Lubricating Grease
- ASTM D6175 Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
- STM D6174 Inorganic Sulfate in Surfactants by Potentiometric Lead Titration
- ASTM D6173 Various Anionic Surfactant Actives by Potentiometric Titration
- ASTM D6159 Hydrocarbon Impurities in Ethylene by Gas Chromatography
- ASTM D6150 Estimating Processing Losses of Plastisols and Organosols Due to Volatility
- ASTM D6147 Determination of Force Decay in Vulcanized Rubber and Thermoplastic Elastomer in Compression
- ASTM D6137 Sulfuric Acid Resistance of Polymer Linings
- ASTM D6133 Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Paints and Coatings
- ASTM D6144 Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography
- ASTM D6143 Iron Content of Bisphenol A (4,4’–Isopropylidenediphenol)
- ASTM D6142 Analysis of Phenol by Capillary Gas Chromatography
- ASTM D6139 Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask
- ASTM D6138 Corrosion-Preventive Properties of Lubricating Greases
- ASTM D5656 Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM D3658 Torque Strength of Ultraviolet Light-Cured Glass/Metal Adhesive Joints
- ASTM D3528 Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
- ASTM D3433 Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
- ASTM D3310 Determining Corrosivity of Adhesive Material
- ASTM D3167 Floating Roller Peel Resistance of Adhesives
- ASTM D3166 Fatigue Properties of Adhesives in Shear by Tension Loading
- ASTM D3165 Strength Properties of Adhesives in Shear by Tension Loading
- ASTM D2919 Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
- ASTM E252 Thickness of Foil, Thin Sheet, and Film by Mass Measurement
- ASTM E251 Performance Characteristics of Metallic Bonded Resistance Strain Gauges
- ASTM E248 Determination of Manganese in Manganese Ores
- ASTM E247 Determination of Silica in Manganese Ores, Iron Ores, and Related Materials
- ASTM E246 Determination of Iron in Iron Ores and Related Materials
- ASTM E224 Analysis of Hydrochloric Acid
- ASTM E208 Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
- ASTM E202 Test Method for Analysis of Ethylene Glycols and Propylene Glycols
- ASTM E223 Analysis of Sulfuric Acid
- ASTM E222 Determination of Hydroxyl Groups
- ASTM E220 Calibration of Thermocouples By Comparison Techniques
- ASTM E181-10 Test method for Detector Calibration and Analysis of Radionuclides
- ASTM E207 Thermal EMF Test of Single Thermo-element Materials
- ASTM E194 Method for Acid-Insoluble Content of Copper and Iron Powders
- ASTM E162 Surface Flammability of Materials Using a Radiant Heat Energy Source
- ASTM E159 Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
- ASTM E139 Creep, Creep Rupture and, Stress Rupture Test of Metallic Materials
- ASTM E132 Test Method for Poisson’s Ratio at Room Temperature
- ASTM E128 Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
- ASTM E126 Inspection, Calibration, and Verification of ASTM Hydrometers
- ASTM E119 Fire Tests of Building Construction and Materials
- ASTM E90 Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
- ASTM E84 Test Method for Surface Burning Characteristics
- ASTM E82 Test Method for Determining the Orientation of a Metal Crystal
- ASTM E81 Test Method for Preparing Quantitative Pole Figure
- ASTM E77 Inspection and Verification of Thermometers
- ASTM E69 Combustible Properties of Treated Wood by the Fire-Tube Apparatus
- ASTM E53 Determination of Copper in Unalloyed Copper by Gravimetry
- ASTM E45 Determining the Inclusion Content of Steel
- ASTM E37 Chemical Analysis of Pig Lead
- ASTM E34 Chemical Analysis of Aluminum and Aluminum-Base Alloys
- ASTM E23 Notched Bar Impact Testing of Metallic Materials
- ASTM E21 Elevated Temperature Tension Tests of Metallic Materials
- ASTM E18 Rockwell Hardness of Metallic Materials
- ASTM E10 Determining the Brinell hardness of Metallic Materials
- ASTM D7912 Resistance of Finish to Heat Aging
- ASTM D7854 Standard Test Method for Carbon Black-Void Volume at Mean Pressure
- ASTM D7884 Determination of Carboxybenzaldehyde and Toluic Acid
- ASTM D7842/D7842M Holding Strength of Tack and Prong Fastener Attached Buttons
- ASTM D7907 Determination of Bactericidal Efficacy of Medical Gloves
- ASTM D7811 Bow and Skew Using a Measuring Tool
- ASTM D7836 Measurement of Yield Stress of Paints, Inks, and Related Liquid Materials
- ASTM D7835/D7835M Solvent Resistance of an Organic Coating using a Mechanical Rubbing Machine
- ASTM D7834 Standard Test Method for Filling Material Shedding of Paint Brushes
- ASTM D7804 Fiber Shedding of Paint Roller Covers
- ASTM D7791 Uniaxial Fatigue Properties of Plastics
- ASTM D7774 Flexural Fatigue Properties of Plastics
- ASTM D7723 Macro-Dispersion of Fillers in Compounds
- ASTM D7710 Determination of Volume and Density of Rigid Material
- ASTM D7709 Measuring Water Vapor Transmission Rate of Pharmaceutical Bottles
- ASTM D7704 Determining total Aldehydes in Styrene Monomer
- ASTM D7705 Alkali Resistance of Fiber Reinforced Polymer used in Construction
- ASTM D7681 Measuring Gradation of Glass Spheres using a Stream Digital Image Analyzer 
- ASTM D7661 Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
- ASTM D7646 Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys
- ASTM D7645 Determination of Insecticides in Water by Liquid Chromatography
- ASTM D7639 Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
- ASTM D7638 Determination of Fatty Acids and Esters in Glycerin
- ASTM D7637 Determination of Glycerin Assay by Titration
- ASTM D7635/7635M Measurement of Thickness of Coatings over Fabric Reinforcement
- ASTM D7617/7617M Transverse Shear Strength of Fiber-Reinforced Polymer Matrix
- ASTM D7514 Ink Stain blocking of Architectural Paint Systems
- ASTM D7513 The Capacity of Mixed Bed Ion Exchange Cartridges
- ASTM D7558 Colorimetric/Spectrophotometric Procedure
- ASTM D7605 Thermoplastic Elastomers-Measurement of Rheological and Dynamic Properties
- ASTM D7599 Determination of Ethanol Amines in Water by Liquid Chromatography
- ASTM D7536 Dispersive X-ray Fluorescence Spectrometry
- ASTM D7490 Contact Angle Measurements
- ASTM D7773-12 Determination of Volatile Inorganic Acids
- ASTM D7760 Hydraulic Conductivity of Tires
- ASTM D7734/D7734M Open Time of Oxidative Printing Inks
- ASTM D7724 Standard Test Method for Carbon Black
- ASTM D1062 Cleavage Strength of Metal-to-Metal Adhesive Bonds
- ASTM D2739 Volume Resistivity of Conductive Adhesive
- ASTM D2918 Durability Assessment of Adhesive Joints Stressed in Peel
- ASTM D1184 Flexural Strength of Adhesive Bonded Laminated Assemblies
- ASTM D1002 Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens
- ASTM D2674 Analysis of Sulfochromate Etch Solution
- ASTM D2557 Tensile-Shear Strength of Adhesives in the Subzero Temperature
- ASTM D2295 Strength Properties of Adhesives in Shear by Tension Loading
- ASTM D2294 Creep Properties of Adhesives in Shear by Tension Loading
- ASTM D2293 Creep Properties of Adhesives in Shear by Compression Loading
- ASTM D2095 Tensile Strength of Adhesives by Means of Bar and Rod Specimens
- ASTM D1876 Peel Resistance of Adhesives (T-Peel Test)
- ASTM D1781 Climbing Drum Peel for Adhesives
- ASTM D1304 Adhesives Relative to their use as Electrical Insulator
- ASTM D1489 Nonvolatile Content of Aqueous Adhesives
- ASTM D1146 Blocking Point of Potentially Adhesive Layers
- ASTM D1084 Test Methods for Viscosity of Adhesives
- ASTM D4883 Density of Polyethylene by the Ultrasound Technique
- ASTM D7191 Determination of Moisture in Plastics by Relative Humidity
- ASTM D6980 Determination of Moisture in Plastics by Loss in Weight
- ASTM D6953 Antioxidants and Erucamide Slip Additives in Polyethylene
- ASTM D6869 Coulometric and Volumetric Determination of Moisture in Plastics
- ASTM D6645 Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
- ASTM D6474 Molecular Weight Distribution and Molecular Weight Averages of Polyolefins
- ASTM D6247 Analysis of Elemental Content in Polyolefins
- ASTM D6042 Phenolic Antioxidants and Erucamide Slip Additives
- ASTM D5594 Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers
- ASTM D5508 Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins & Nitrile-Butadiene Rubber
- ASTM D5296 Molecular Weight Averages and Molecular Weight Distribution of Polystyrene
- ASTM D5507 Trace Organic Impurities in Monomer Grade Vinyl Chloride
- ASTM D5227 Measurement of Hexane Extractable Content of Polyolefins
- ASTM D5225 Measuring Solution Viscosity of Polymers with a Differential Viscometer
- ASTM D5017 Linear Low-Density Polyethylene (LLDPE) Composition
- ASTM D4754 Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
- ASTM D4603 Inherent Viscosity of Polyethylene Terephthalate (PET)
- ASTM A1108 Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams
- ASTM D950 Test Method for Impact Strength of Adhesive Bonds
- ASTM D903 Test for Peel or Stripping Strength of Adhesive Bonds
- ASTM D897 Test Method for Tensile Properties of Adhesive Bonds
- ASTM D6325 Test for Open Assembly Time of Carpet Mastic Adhesives
- ASTM D6004 Adhesive Shear Strength of Resilient Flooring and Carpet Adhesives
- ASTM D5574 Allowable Mechanical Properties of Wood-Bonding Adhesives for Structural Design
- ASTM D5215 Instrumental Test of Vinyl Flooring Staining by Adhesives
- ASTM D4502 Heat and Moisture Resistance of Wood-Adhesive Joints
- ASTM D4027 Shear Properties of Structural Adhesives by Modified Rail Test
- ASTM D3983 Measuring Adhesive Strength and Shear Modulus by Thick-Adherend Tensile Test
- ASTM D3931 Strength Test of Gap-Filling Adhesive Bonds in Shear by Compression Loading
- ASTM D3632 Accelerated Aging of Adhesive Joints by Oxygen-Pressure Test
- ASTM D1995 Methods for Multi-Modal Strength Testing of Autohesives
- ASTM D5868 Lap Shear Adhesion Test for Fiber Reinforced Plastic
- ASTM D5041 Fracture strength in Cleavage of Adhesives in Bonded Joints
- ASTM D4501 Adhesive Shear Strength between Rigid Substrates by Block-Shear Method
- ASTM D3164 Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints
- ASTM D5649 Torque Strength of Adhesives Used on Threaded Fasteners
- ASTM D3163 Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints
- ASTM D5648 Torque-Tension Relationship of Adhesives on Threaded Fasteners
- ASTM D4562 Adhesives Shear Strength Using Pin-and-Collar Specimen
- ASTM D4670 Determination of Suspended Matter in Polyols
- ASTM D4669 Determination of Specific Gravity of Polyols
- ASTM D4663 Determination of Hydrolyzable Chlorine of Isocyanates
- ASTM D4662 Determination of Acid and Alkaline Numbers of Polyols
- ASTM D4661 Determination of Total Chlorine in Isocyanates
- ASTM D4660 Determination of the Isomer Content of Toluene diisocyanate
- ASTM D4659 Determination of Specific Gravity of Isocyanates
- ASTM D4274 Determination of Hydroxyl Numbers of Polyols
- ASTM D4273 Determination of Primary Hydroxyl Content of Polyether Polyols
- ASTM D3769 Microcellular Urethanes High-Temperature Sag
- ASTM D3768 Microcellular Urethanes Flexural Recovery
- ASTM D3576-20 The cell size of Rigid Plastics
- ASTM D3575 Flexible Cellular Materials Made from Olefin Polymers
- ASTM D3574 Flexible Cellular Materials – Slab, Bonded, and Molded Urethane Foams
- ASTM D3489 Microcellular Urethane Materials
- ASTM D2842 Water Absorption of Rigid Cellular Plastics
- ASTM D2126 Response of Rigid Cellular Plastics to Thermal and Humid aging
- ASTM D1623 Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
- ASTM D1622 Apparent Density of Rigid Cellular Plastics
- ASTM D1621 Compressive Properties of Rigid Cellular Plastics
- ASTM D8280 Determination of the Blooming of Brominated Flame Retardants by Ion Chromatography
- ASTM D8133 Determination of Low-Level Phthalates in PVC Plastics by Solvent Extraction
- ASTM D7823 Determination of Low-Level Phthalates in PVC Plastics by Thermal Desorption
- ASTM D3749 Vinyl Chloride Monomer determination in PVC by Gas Chromatographic Headspace technique
- ASTM D1921 Particle Size (Sieve Analysis) of Plastic Materials
- ASTM A938 Torsion Testing of Wire
- ASTM A923 Detrimental Intermetallic Phase in Duplex Ferritic Stainless Steels
- ASTM E2903 Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes
- ASTM C1259 Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics
- ASTM D746 Brittleness Temperature
- ASTM D4443 Residual Vinyl Chloride Monomer Content
- ASTM D4275 Butylated Hydroxy Toluene in Polymers of Ethylene and Ethylene–Vinyl Acetate
- ASTM D4218 Determination of Carbon Black Content in Polyethylene Compounds
- ASTM D4001 Average Molecular Weight of Polymers By Light Scattering
- ASTM E1815 Classification of Film Systems for Industrial Radiography
- ASTM E1695 Computed Tomography (CT) System Performance
- ASTM E1165 Focal Spots of Industrial X-Ray Tubes
- ASTM E2971 Determining Boron-10 Areal Density
- ASTM E803 L/D Ratio of Neutron Radiography Beams
- ASTM E2861 Beam Divergence and Alignment
- ASTM E561 Determination of Resistance to Fracturing of Metallic Materials by R-curves
- ASTM E545 Determining the Image Quality
- ASTM E1004 Determining Electrical Conductivity
- ASTM E436 Drop-Weight Tear Tests
- ASTM E1922 Translaminar Fracture Toughness of Polymers
- ASTM E3039 Determination of Crack-Tip-Opening Angle
- ASTM E2899 Measurement of Initiation Toughness in Surface Cracks
- ASTM E1921 Determination of Reference Temperature for Ferritic Steels
- ASTM E3098 Mechanical Uniaxial Pre-strain and Thermal Recovery of Shape Memory Alloys
- ASTM E3097 Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
- ASTM E2948 Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
- ASTM E2714 Creep-Fatigue Testing
- ASTM E2246 Strain gradient measurements of thin films using an Optical Interferometer
- ASTM E2245 Residual Strain Measurements of Reflecting Films using an Optical Interferometer
- ASTM E2244 Length Measurements of Reflecting Films using an Optical Interferometer
- ASTM F76 Determining Resistivity, Hall Coefficient, and Mobility
- ASTM E837 Determining Residual Stresses by the Hole Drilling Strain-Gage Method
- ASTM D3591 Logarithmic Viscosity Number of Poly Vinyl Chloride (PVC)
- ASTM D3124 Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
- ASTM D1895 Apparent Density, Bulk Factor, and Pour ability of Plastic Materials
- ASTM D1601 Dilute Solution Viscosity of Ethylene Polymers
- ASTM D1505 The density of Plastics by the Density-Gradient Technique
- ASTM A931 The tension of wire ropes and strands
- ASTM A1081 Evaluating Bond of Seven-Wire Steel Prestressing Strand
- ASTM D494 Acetone Extraction of Phenolic Products
- ASTM A1061 Testing Multi-Wire Steel Prestressing Strand
- ASTM A1034 Testing Mechanical Splices for Steel Reinforcing Bars
- ASTM A1032 Hydrogen Embrittlement Resistance for Steel Wire
- ASTM A754 Metallic Coatings on Steel by X-Ray Fluorescence
- ASTM A428 Weight of coating on aluminum-coated iron or steel articles
- ASTM A90 Zinc Coating Mass Test
- ASTM A1084 Detecting Detrimental Phases in Lean Duplex Ferritic Stainless Steels
- ASTM A1058 Mechanical Testing of Steel Products-Metric
- ASTM F2877 Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum
- ASTM A991 Conducting Temperature Uniformity Surveys
- ASTM E1935 Calibrating and Measuring CT Density
- ASTM C1351M Measurement of Viscosity of Glass by Viscous Compression
- ASTM C1730 Nanoparticles of Ceramics Using X-Ray Gravity Sedimentation
- ASTM C371 Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
- ASTM C324 Determination of Free Moisture in Ceramic Clays
- ASTM C326 Drying and Firing Shrinkage of Ceramic Whiteware Clays
- ASTM C1274 Determination of ceramic surface area through physical adsorption
- ASTM F218 Optical Retardation and Analyzing Stress in Glass
- ASTM C323 Chemical Analysis of Ceramic Clays
- ASTM C1494 Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
- ASTM C1070 Particle Size Distribution of Alumina by Laser Light Scattering
- ASTM C1350M Viscosity of Glass by Beam Bending (Metric)
- ASTM C770 Measurement of Glass Stress—Optical Coefficient
- ASTM C730 Knoop Indentation Hardness of Glass
- ASTM C729 Method to Find Density of Glass by Sink-Float Comparator
- ASTM C693 Method to Calculate Density of Glass by Buoyancy
- ASTM C338-93 Assessing the Softening Points of Glass
- ASTM C336 Fiber Elongation to check Annealing and Strain Point of Glass
- ASTM C158-02 Determination of Modulus of Rupture of Glass
- ASTM C1652 Optical Distortion measurement in Flat Glass by Digital Photography
- ASTM C1651 Roll Wave Distortion measurement in Heat-Treated Flat Glass
- ASTM D116 Vitrified Ceramics for Electrical Applications
- ASTM C1607 Checking the Suitability of Ceramicware for use in Microwave
- ASTM C1606 TCLP Testing for Container Glassware
- ASTM C1605 WDXRF Spectrometry for Chemical Analysis of Ceramic Materials
- ASTM C1424 Monotonic Compressive Strength of Advanced Ceramics
- ASTM C1421 Fracture Toughness of Advanced Ceramics
- ASTM C1368 Slow Crack Growth Parameters of Advanced Ceramics
- ASTM C1366 Tensile Strength of Monolithic Advanced Ceramics
- ASTM C1327 Vickers Indentation Hardness of Advanced Ceramics
- ASTM C1326 Knoop Indentation Hardness of Advanced Ceramics
- ASTM C1291 test for Elevated Temperature Tensile Creep Strain, Rate, and Time-to-Failure for Monolithic Advanced Ceramics
- ASTM C1273 Tensile Strength of Monolithic Advanced Ceramics
- ASTM C1211 Flexural Strength of Advanced Ceramics at Elevated Temperatures
- ASTM C1198 Dynamic Young’s Modulus, Shear Modulus & Poisson’s Ratio for Ceramics
- ASTM C1203 Determination of Alkali Resistance of a Ceramic-Glass Enamel
- ASTM C978 Photoelastic Determination of Residual Stress in a Glass Matrix
- ASTM C927 Lead and Cadmium Externally Decorated with Ceramic Glass Enamels
- ASTM C777 Sulfide Resistance of Ceramic Decorations on Glass
- ASTM C735 Acid Resistance of Ceramic Decorations on Glass Containers
- ASTM C724 Acid Resistance of Ceramic Decoration on Architectural Glass
- ASTM C676 Detergent Resistance of Ceramic Decorations
- ASTM C675 Alkali Resistance of Ceramic Decorations
- ASTM C1161 Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM D5452 Particulate Contamination in Aviation Fuels by Laboratory Filtration
- ASTM B311 Density of Powder Materials Containing Less Than Two Percent Porosity
- ASTM E203 Test Method for Water Using Volumetric Karl Fischer Titration
- ASTM D6625 Protective Properties of Polish Applied to a Painted Panel
- ASTM D3045 Heat Aging Test of Plastics Without Load
- ASTM D522 Mandrel Bend Test of Attached Organic Coatings
- ASTM D6055 Mechanical Handling of Unitized Loads and Shipping Cases and Crates
- ASTM D3363 Film Hardness
- ASTM D2244 Calculating Color Differences
- ASTM D3389 Coated Fabrics Abrasion Resistance
- ASTM B117 Salt Spray (Fog) Testing
- ASTM D5151 Detection of Holes in Medical Gloves
- ASTM G85 Modified Salt Spray (Fog) Testing
- ASTM D5894 Cyclic Salt Fog/UV Exposure of Painted Metal
- ASTM D1654 Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
- ASTM D1822 Tensile-Impact Energy test
- ASTM G21 Resistance of Synthetic Polymeric Materials to Fungi
- ASTM D5511 Anaerobic Biodegradation of Plastic Materials
- ASTM D5338 Determining Aerobic Biodegradation
- ASTM D1494 Diffuse Light Transmission Factor
- ASTM D1475 Density of Liquid Coatings, Inks
- ASTM D2794 Resistance of Organic Coatings
- ASTM D3273 Resistance to Growth of Mold
- ASTM D4541 Pull-Off Strength of Coatings
- ASTM D5895 Drying or Curing During Film Formation of Organic Coatings
- ASTM D7234 Pull-Off Adhesion Strength
- ASTM E2141 Accelerated Aging of Electrochromic Devices in Sealed Glass Units
- ASTM D2290 Apparent Hoop Tensile Strength
- ASTM D1598 Time-to-Failure of Plastic Pipes
- ASTM D5528 Mode I Interlaminar Fracture Toughness
- ASTM D6742 Filled-Hole Tension and Compression Testing
- ASTM D7291 Through-Thickness Flatwise Tensile Strength and Elastic Modulus
- ASTM D1415 Rubber Hardness Test
- ASTM D454 Test for Rubber Deterioration
- ASTM D573 Test for Rubber Deterioration in an Air Oven
- ASTM G65 Abrasion Test Using the Dry Sand/Rubber Wheel Apparatus
- ASTM D1037 Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
- ASTM D1823 Apparent Viscosity of Plastisols and Organosols
- ASTM C1326 Knoop indentation hardness of ceramics
- ASTM C1327 Vickers indentation hardness of ceramics
- ASTM C1323 Strength of Diametrically Compressed C-ring
- ASTM C1674 Flexural Strength With Engineered Porosity
- ASTM C1292 Shear Strength of Continuous Fiber-Reinforced Ceramics
- ASTM C1337 Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading
- ASTM C1341 Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
- ASTM C1510 Spectrophotometry for Color Assessment
- ASTM C539 Test for Linear Thermal Expansion by Interferometric Method
- ASTM C177 Test to determine Steady-State Heat Flux by Guarded-Hot-Plate Apparatus
- ASTM F77 Test for Apparent Density of Ceramics
- ASTM C329 Test for Specific Gravity of Fired Ceramic Whiteware Materials
- ASTM D2520 Test for Complex Permittivity of Solid Electrical Insulating Materials
- ASTM D2149 Test for Dielectric Constant and Dissipation Factor of Dielectrics
- ASTM C730 Standard Test for Knoop Indentation Hardness of Glass
- ASTM F417 Test for Modulus of Rupture of Electronic-Grade Ceramics
- ASTM C1505 Determining Breaking Strength or Modulus of Rupture of Tiles
- ASTM C1525 Determining Thermal Shock Resistance of Advanced Ceramics by Water Quenching
- ASTM C674 Determining Flexural Properties of Ceramic Whiteware
- ASTM C623 Test for Elastic Properties of Glass and Glass-Ceramic by Resonance
- ASTM C1624 Adhesion Strength and Mechanical Failure
- ASTM E2298 Instrumented Impact Testing of Metallic Materials
- ASTM E290 Bend Testing of Material for Ductility
- ASTM E18 Rockwell Hardness of Metallic Materials
- ASTM A255 Determining Hardenability of Steel
- ASTM A1038 Portable Hardness Testing by UCI Method
- ASTM A833 Indentation Hardness of Metallic Materials
- Tensile Fiber-Reinforced Ceramic Test by ASTM C1275
- ASTM F3039 Detecting Leaks in Nonporous Packaging by Dye Penetration
- Test for Electrical Resistance of Ceramics at Elevated Temperatures ASTM D1829
- Brinell Hardness of Metallic Materials ASTM E10
- Rockwell and Brinell Hardness of Metallic Materials ASTM E110
- ASTM E190 Guided Bend Test for Ductility of Welds
- ASTM E384 Microindentation Hardness of Materials
- ASTM E618 Machining Performance of Ferrous Metals
- ASTM G48 Pitting and Crevice Corrosion Resistance of Stainless Steels
- ASTM E572 Analysis of Stainless and Alloy Steels by WDXRF
- ASTM E1086 Spark Atomic Emission Spectrometry for Steel Analysis
- ASTM A944 Bond strength of steel reinforcing bars
- ASTM F1608 Microbial Ranking of Porous Packaging Materials
- ASTM C679 Test for Tack-Free Time of Elastomeric Sealants
- ASTM C1358 Test for Compressive Strength of Advanced Ceramics
- ASTM C1359 Test for Tensile Strength of Advanced Ceramics at Elevated Temperatures
- ASTM C1425 Test for Interlaminar Shear Strength of Advanced Ceramics at Elevated Temperatures
- ASTM C1468 Test for Transthickness Tensile Strength of Advanced Ceramics
- ASTM C1469 Test for Shear Strength of Joints of Advanced Ceramics
- ASTM C1773 Test for Monotonic Axial Tensile Behavior of Advanced Ceramic Tubes
- ASTM C1863 Test for Hoop Tensile Strength of Advanced Ceramic Tube Using Direct Pressurization
- ASTM C1869 Test for Open-Hole Tensile Strength of Advanced Ceramics
- ASTM C146 Chemical Analysis of Glass Sand
- ASTM C225 Test Methods for Resistance of Glass Containers to Chemical Attack
- ASTM C429 Test for Sieve Analysis of Raw Materials for Glass Manufacture
- ASTM C813 Test for Hydrophobic Contamination on Glass by Contact Angle Measurement
- ASTM C1279 Test for Edge and Surface Stresses in Tempered Flat Glass
- ASTM C1901 Test for Measuring Optical Retardation in Flat Architectural Glass
- ASTM C149 Test for Thermal Shock Resistance of Glass Containers
- ASTM C147 Test for Internal Pressure Strength of Glass Containers
- ASTM C1819 Test for Hoop Tensile Strength of Advanced Ceramic Composite Tubes Using Elastomeric Inserts
- ASTM A956 Leeb Hardness Testing of Steel Products
- Measuring Adhesion by Tape Test ASTM D3359
- Determination of the Mode II Interlaminar Fracture Toughness of Polymer Composites ASTM D7905
- Specific Heat Capacity by Differential Scanning Calorimetry ASTM E1269
- ASTM E606 Strain-Controlled Fatigue Test
- Sandwich Corrosion Test of Aircraft Maintenance Materials ASTM F1110
- Nonvolatile Matter in Volatile Solvent by ASTM D1353
- ASTM C1421 Fracture Toughness at ambient temperature
- ASTM C1525 Thermal Shock Resistance by Water Quenching
- ASTM E112 Determination of Average Grain Size
- Combustibility of Building Materials ASTM E2652
- Determination of Bacteria-Eliminating Effectiveness ASTM E2755
- Small Punch Testing of Metallic Materials ASTM E3205
- Wear Testing of Polymeric Materials by ASTM F732
- Tension & Elongation of Elastic Fabric by ASTM D4964
- ASTM C518 Steady-State Thermal Transmission Properties
- Test to determine the amount of Moisture in a Graphite Sample ASTM C562
- Coating Flexibility of Prepainted Sheet ASTM D4145
- ASTM D3170 Chip Resistance
- Medical Mask Bacterial filtration test ASTM F2101
- Test to determine Mohs Scratch Hardness ASTM C1895
- Yellowness Index (YI) ASTM E313
- Infrared Spectroscopy Techniques ASTM E1252, ASTM E168
- ASTM F1249 Water Vapor Transmission Rate
- ASTM F1921 Hot Seal Strength
- Antimicrobial Efficacy Testing ASTM E2180
- Linear Thermal Expansion of solids ASTM E228
- Shear Properties of Composite Materials by V-notched Rail Shear Method ASTM D7078
- Test for Charpy Impact Resistance of Notched Specimens of Plastics ASTM D6110
- Test to Determine Ignition Temperature of Plastics ASTM D1929
- Analysis of Aqueous Extractable Protein in Elastomers ASTM D5712
- Melting Points and the Melting Range of Organic Chemicals ASTM E324
- Seal Strength of Flexible Barrier Materials ASTM F88
- Antigenic Protein in Hevea Natural Rubber ASTM D6499
- Impedance and Absorption of Acoustical Materials ASTM E1050
- Flexural Toughness of Fiber Reinforced Concrete ASTM C1550
- ASTM E96 Water Vapor Transmission
- ASTM D2584, D5630, ISO 3451 Ash Content
- ASTM D1623 Tensile and Tensile Adhesion Properties
- ASTM D5946 Contact Angle Measurements
- ASTM D6641 Compressive Properties (CLC)
- ASTM D7264 Flexural Properties of Composites
- Flexural Test Composites Four-Point Bending ASTM D6272
- ASTM D7766 Damage Resistance Test of Sandwich Constructions
- ASTM E1131, ISO 11358 Thermogravimetric Analysis (TGA)
- ASTM E831, ASTM D696 Coefficient of Linear Thermal Expansion
- ASTM D3835 Capillary Rheometry Shear Sweep, Thermal Stability
- ASTM D3846 Shear Strength of Reinforced Plastics
- ASTM D3985 Oxygen Transmission Rate (OTR)
- Dynamic Mechanical Analysis ASTM D4065, D4440, D5279
- ASTM D4226, D5420 Gardner Impact Test
- ASTM G154, ASTM D4329, ASTM D4587, ISO 4892 QUV Accelerated Weathering
- ASTM D5766 Tensile Strength (Open Hole)
- Izod Impact (Unnotched) by ASTM D4812, ISO 180
- V-Notched Shear by ASTM D5379
- ASTM D7249Sandwich Flexural Stiffness
- ASTM D638 Plastics Tensile Testing
- ASTM D648, ISO 75 Heat Deflection Temperature
- ASTM D695, ISO 604 Compression Properties
- ASTM D732 Shear Strength Test
- ASTM D785, ISO 2039 Rockwell Hardness
- Moisture Content of Plastics ISO 15512
- ASTM D789, D4878 Relative Viscosity of Polyamide
- ASTM D790, ISO 178 Flexural Properties Testing
- ASTM D792, ISO 1183 Specific Gravity and density
- ASTM D882 Tensile Properties (Sheet)
- ASTM D1002, ASTM D5868, ASTM D3163 for Lap Shear Tests
- ASTM D4459, ASTM D2565, ASTM G155 Xenon-Arc Accelerated Exposure (XAAE)
- ASTM D3039 Tensile Testing of Polymer Matrix Composite Materials
- ASTM D1693 Environmental Stress Cracking Test of Ethylene Plastics
- ASTM D1822 Tensile Impact Test for Plastics
- ASTM D4093 Residual Strain Measurements in Plastics
- ASTM D5023 Dynamic Mechanical Testing of Plastics
- ASTM D6344 Transport Packaging Concentrated Impact
- Test Guide for Oxo-biodegradable Plastics ASTM D6954
- ASTM D3164 Shear by Tension Loading
- ASTM D3410 Compression of Composites
- ASTM D3418, ASTM E1356, ISO 11357 Differential Scanning Calorimetry
- ASTM D3518 Shear Response
- ASTM D3763, ASTM D7192, ISO 6603, ISO 7765 Multiaxial Impact Test
- ASTM D955 Shrinkage From Mold Dimensions
- ASTM D1003 Haze and Transmittance
- ASTM D1004 Tear Resistance
- ASTM D1044 (Haze), ASTM D4060 (Weight Loss) Taber Abrasion
- ASTM D1204 Dimensional Stability
- ASTM D1238, ISO 1133 Melt Flow Rate
- ASTM D1525 Vicat Softening Point of Plastics
- ASTM D1708 Micro Tensile
- ASTM D1603 Carbon Black
- ASTM D1709, ISO 7765 Drop Dart
- ASTM D1894 Coefficient of Friction
- ASTM D1922 Elmendorf Tear Test
- ASTM D2240 Shore Hardness
- ASTM D2344 Short Beam Shear Testing
- ASTM D3012, GM9059P Thermal-Oxidative Stability
- ASTM D2583 Barcol Hardness Test
- ASTM D2584 Ignition Loss of Cured Reinforced Resins
- ASTM D2734 Void Content of Reinforced Plastics
- ASTM C271 Density of Sandwich Core Materials
- ASTM D543 Chemical Compatibility
- ASTM D570 Water Absorption
- ASTM D635, ISO 3795 Flammability
- ASTM D638, ISO 527 Poisson’s Ratio
- ASTM C272 Water Absorption of Core Materials
- ASTM C273 Shear Test (Core) Tension or Compression
- ASTM C297 Tensile Strength of Sandwich Constructions
- ASTM C365 Flatwise Compressive Properties
- ASTM C393 Sandwich Construction Core Shear Properties
- ASTM D149 Dielectric Strength, IEC 60243
- ASTM D150 Dielectric Constant and Dissipation Factor
- ASTM D256 Izod Impact (Notched), ISO 180
- ASTM D257 Surface Resistivity, Volume Resistivity
- ASTM D2863 Oxygen Index
- ASTM D395B Compression Set Testing
- ASTM D412 Tensile Set (Elastomers)
- ASTM D471 Rubber Property and Liquids Effect
- ASTM D2457, ASTM D523 Specular Gloss
- ASTM D542 Transparent Organic Plastic Refractive Index
- Category: Water and Environmental Testing
- ASTM E1782-14 Determination of Vapour Pressure by Thermal Analysis
- ASTM E1754-17a Determination of low levels of Water in Liquid Chlorine by Infrared Spectrophotometry
- ASTM D6502 Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by XRF
- ASTM E640 − 06 Preservatives in Water-Containing Cosmetics
- ASTM E598-08 Measuring Extreme Heat-Transfer Rates from High-Energy Environments
- ASTM D698-12 Laboratory Compaction Characteristics of Soil
- ASTM D7645 Determination of Insecticides in Water by Liquid Chromatography
- ASTM D7599 Determination of Ethanol Amines in Water by Liquid Chromatography
- Category: Blogs
- Top 20 Coating Testing Methods
- Top 20 Photovoltaic Testing Methods
- Top 20 Solar Panel Testing Methods
- Top 20 Additive Manufacturing Testing Methods
- Top 20 Nanotechnology Testing Methods
- Top 20 Semiconductor Testing Methods
- Top 20 Battery Testing Methods
- Top 20 Energy Storage Equipment Testing Methods
- California Energy Commission (CEC) Testing Services
- Registration of Biocides in the USA and Canada
- Procedure for GCMS – Gas Chromatography-Mass Spectrometry Analysis
- Physico-Chemical Properties Data Generation
- IEEE 1725 and IEEE 1625 Battery Certification
- Classification and Labeling of Chemical Services – Globally Harmonized System (GHS)
- Hazard Analysis Critical Control Point (HACCP)
- Material Acceptance Verification in the Automotive Industry
- DesignLights Consortium® (DLC) for LED Technology
- Adhesion Strength and Mechanical Failure
- Coefficient of Thermal Expansion for Metals
- Thermal Conductance vs Thermal Resistance
- Standards for Thermal Analysis
- Standards for Thermal Analysis
- Cooling Fluid vs Heating Fluid
- Residual Stress & its Types
- UL 263 Fire Resistance Rating
- What is W/mK?
- Heat Transfer Fluids
- Conduction in Electric Vehicles
- Autoclaving Rubber or Vulcanized Rubber
- Fuel Cell Coolants
- Inductively Coupled Plasma (ICP)
- ISO 17025 Standard
- Toxic Substances Control Act (TSCA)
- Corrosion Testing: Steel vs Ceramic
- Common Uses of Corrosion Testing
- Types of Corrosion Tests
- Types of Mechanical Testing
- Types of Thermal Testing
- Common uses of Root Cause Analysis (RCA)
- ISO 17025 Testing Standard
- EN 60332-1-2 Electrical Cable Flammability Test
- Total Organic Carbon (TOC) Testing
- Automated Curve Tracers
- Total Organic Carbon (TOC) Testing
- ISO 1400
- National Electrical Manufacturers Association (NEMA) 250
- AS9100 Quality Management System
- Consumer Product Safety Commission (CPSC)
- Design Verification Plan and Report (DVP&R)
- Production Part Approval Process (PPAP)
- ISO 9001
- ISO 10993
- Burn-in Board (HAST Board)
- Thermal Diffusivity Testing Services
- ASTM D7264 – Specimen Size
- Temperature and Humidity Control in Laboratories
- Difference Between the Types of ASTM Standards
- Stress Optical Coefficient
- Cyclic Moisture Resistance Testing
- Electrical and Electronics Testing
- Thermal Properties Testing Services
- Polymer Dielectric Constant Table
- Fourier Transform Infrared Spectroscopy (FTIR) Analysis Testing Lab
- X-Ray Fluorescence (XRF) Analysis and Testing Facility
- ASTM B117 Salt Spray Test Procedure
- ASTM D412 – Specimen Size
- ISO 178 – Specimen Size
- ASTM D790 Flexural Test – Specimen Size
- High Pressure Accelerated Aging Test Chamber
- Scanning Acoustic Tomography (SAT)
- 85 85 Test
- Battery Testing Solutions in Manufacturing and Production
- Thermal Shock Test
- ISO 178
- Rheometry For Viscoelastic Properties
- Nanoindentation for Thin Film < 100 nm
- Thermomechanical Analysis (TMA)
- Spectral Ellipsometry (SE)
- Substances of High Concern Testing
- Energy Storage Devices Testing
- Medical Devices Product Safety Standards
- Lithium Batteries Testing
- Lighting Equipments Testing
- National Environmental Laboratory Accreditation Program (NELAP)
- ISO/IEC 17025 Lab Accreditation
- American Association for Laboratory Accreditation
- OSHA’s Nationally Recognized Testing Laboratory (NRTL)
- American National Standards Institute (ANSI)
- Automotive Industry
- Advanced Materials
- Additive Manufacturing Testing
- Nanotechnology
- Aerospace Industry
- Semiconductors
- Bulk Density by Tap Density Analysis
- Robotic Grippers Inspired by Japanese Art of Folding Paper
- Temperature Sensor for Robots
- A New Optical Device for the Origin of the Universe
- New Structured Thermal Armor Achieves Liquid Cooling Above 1,000°C
- Matter Created on Table-top as Graphene Enables Schwinger Effect
- Revolutionary Material Triangulene Synthesized after 70 Years
- Artificial Synaptic Memory for Computers And Other Intelligent Systems
- Artificial Leaf Captures 100 times More Carbon Than Other Systems
- A Novel Catalyst for Propylene Production
- ‘Strange Metals’ Could Lead to Fundamental Insights
- Artificial Muscles Made of Proteins
- Zeolite Nanotube Discovered
- Rubber materials for safe and long-lasting electric vehicle batteries
- First Fully 3D printed OLED Display
- Solar cells have just become more efficient
- Spectral Ellipsometry (SE)
- Category: Case Studies
- Acoustic Emission Testing of Polymer Composites
- Laser Induced Breakdown Spectroscopy (LIBS)
- Photo Induced Force Microscopy (PiFM)
- Small Angle Neutron Scattering
- Solid State Nuclear Magnetic Resonance Spectroscopy
- Helium Ion Microscopy shows Hydrogen degradation of NBR Elastomer
- In-Situ Linear Reciprocating High Pressure Tribometry
- Raman Spectroscopy for Water Pollution Monitoring
- Solid-state Li batteries failure analysis using Scanning Electron Microscopy (SEM)
- High-Resolution Transmission Electron Microscopy (HRTEM) Imaging of ALD Films.
- Determination of dielectric properties of Al2O3 and AlN ceramics at up to 1000°C and MHz frequencies
- Nano-scale roughness measurement of Si-wafers by Atomic Force Microscopy (AFM)
- Analysis of degradation of PVC pipe using Fourier Transform Infrared Spectroscopy (FTIR)
- Dopant and ultra-low concentration elemental analysis using Scanning Transmission Electron Microscopy (STEM) imaging and Electron Energy Loss Spectroscopy (EELS)
- Category: Material Testing Service
- Water Analysis for Industries
- Determining the Breaking Strength of Tiles
- Determining Thermal Shock Resistance of Advanced Ceramics by Water Quenching
- Determining Flexural Properties of Ceramic Whiteware
- Test for Elastic Properties of Glass and Glass-Ceramic by Resonance
- Test for Electrical Resistance of Ceramics at Elevated Temperatures
- Test for Compressive Strength of Advanced Ceramics
- Instrumented Impact Testing of Metallic Materials
- VOC Content Analysis – EPA Method 24
- Cone Calorimeter Test
- Calculating the Thermal Mass of Materials
- Calculating the Thermal Effusivity of Materials
- Calculating Linear Temperature Expansion Coefficient
- Thermal Conductivity Testing & Measurement
- Laser-Flash Method for Determining Thermal
- Thermal Conductivity of Liquids
- Coefficient of Moisture Expansion (CME)
- Stress Relaxation of Materials
- Glass Transition Temperature Testing
- Phthalates Testing and Analysis in Plastics and Polymers
- Rheology Testing of Polymers
- Packaging Material Testing
- Polymers and Plastics Testing Services
- Physical Properties Testing of Materials
- Molecular Weight Determination of Oils
- Migration Testing For Food Contact Materials
- Weathering of Glass
- Chemical Analysis of Metals
- Perfluorooctanoic Acid (PFOA) Testing
- Fire and Flammability Tests for Materials (ASTM C1166)
- Stone, Tile, Roof Materials Testing
- ISO 1182 (ASTM E136 Method B) Non-Combustibility Testing
- ISO 1716 International Standard for Building Material Heat
- IEC 60587 Electrical Insulating Materials Test
- IEC 60332-1-2 Testing Laboratories
- UL 10C Positive Pressure Fire Tests of Door Assemblies
- UL 1685 — Electrical and Optical Fiber Cable Smoke-Release Test
- UL 263 Test Services Fire and Flammability Testing
- UL 94 Standard Flammability Test for Plastic Materials Used in Devices and Appliances
- Limiting Oxygen Concentration (LOC) Test
- Double Shear Test
- 3-Point Flexure Test on Plastics
- Magnetic Paint Inspection (MPI)
- Minimum Explosible Concentration (MEC) Test
- Explosion Severity Testing (Kst)
- Dust Cloud Minimum Ignition Temperature (MIT-cloud) Test
- Dust Cloud Test for Minimum Ignition Energy (MIE)
- Go/No Go Explosibility Screening Test
- Nickel Release Test
- Well Water Testing
- Stress Corrosion Cracking Test
- Particulate Matter Testing
- Micro-Fourier Transform Infrared Spectroscopy (Micro-FTIR)
- PFAS (Perfluoroalkyl and Polyfluoroalkyl Substances) Testing Methods
- Steel Tower Corrosion Assessment
- Strain Gauge Test
- Glass Transition
- ASTM D5994/D5994M Measuring Core Thickness of Textured Geomembranes
- ASTM C241/C241M Test for Abrasion Resistance of Stone Subjected to Foot Traffic
- ASTM E238 Test Method for Pin-Type Bearing Test of Metallic Materials
- ASTM G151 Standard Guide for Exposing Nonmetallic Materials in Accelerated Test Devices that use Laboratory Light Sources
- Glycol Concentration Testing
- Laser Profilometry
- Thermal Resistance Testing
- Ozone Testing
- ASTM E407 Standard Practice for Microetching Metals and Alloys
- ASTM A247 Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
- Latex & AMP Elastomer testing
- Electrostatic Discharge (ESD) Testing
- Parallel Plate Viscometer
- Transient Plane Source (TPS) Technique
- Liquid Chromatography (LC) Testing
- Time Domain Thermoreflectance (TDTR) Testing
- Acceptable Quality Limit (AQL)
- Soil Corrosivity Testing
- Flow Accelerated Corrosion (FAC) Testing
- Compression Set
- Mechanical Testing Of Steel/Metals
- Automotive Volatile Organic Compound (VOC) Testing
- Non-Volatile Matter (NVM) Analysis
- Dimensional Stability Testing
- Measuring the Density of Glass
- Determining Filler Content in Polymers
- Guided Bend Test for Welds
- Izod Impact Test – Specimen Dimensions
- UV Weathering Test
- Environmental Stress Cracking Resistance (ESCR) Testing
- Specific Gravity of Plastic
- Thermal Insulation Testing
- Heat Deflection Temperature (HDT)
- Dielectric Strength Measurement
- Environmental Stress Cracking of Polymers
- Adhesive Tensile Strength Test
- ASTM E1820-21 Standard test method for measurement of fracture toughness
- ASTM E1805-21 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry
- ASTM E1787-16 Standard test method for Anions in Caustic Soda and Caustic Potash by Ion Chromatography
- ASTM E1788-16 Standard test method for Acidity in Acrylonitrile
- ASTM E1784-08 Total Peroxides in Acrylonitrile
- ASTM E1782-14 Determination of Vapour Pressure by Thermal Analysis
- ASTM E1771-07 Determination of Copper in Anode and Blister Copper
- ASTM E1709-09 Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at 0.2 Degree Observation Angle
- ASTM E1710-18 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
- ASTM E1725-19 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
- ASTM E1735-19 Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25MeV
- ASTM E1740-22 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
- ASTM E1746-17a Sampling and Analysis of Liquid Chlorine for Gaseous impurities
- ASTM E1681-03 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
- ASTM E1659-12 Method for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
- ASTM E1641-13 Method for Decomposition Kinetics by Thermogravimetry using the Ozawa/Flynn/Wall Method
- ASTM E1640-13 Method for Assignment of the Glass Transition Temperature by Dynamic Mechanical Analysis
- ASTM D6531 Tinting Strength of Aqueous Ink Systems
- ASTM D6499-12 Antigenic Protein in Natural Rubber and its Products
- ASTM D6484 Open-Hole Compressive Strength of Polymer Matrix
- ASTM D6480-05 Test method for determining asbestos in samples wiped from surfaces
- ASTM D6474-12 Molecular Weight Distribution and Averages of Polyolefins
- ASTM D6442 Copper Release Rate From Antifouling Coatings
- ASTM D5155-19 Determination of the Isocyanate Content of Aromatic Isocyanates
- ASTM D4890-18 Determination of Gardner and APHA Color of Polyols
- ASTM D4878 Determination of Viscosity of Polyols
- ASTM D4877 Determination of APHA Color in Isocyanates
- ASTM D4671 Determination of Unsaturation of Polyols
- ASTM D4875 Polymerized Ethylene Oxide Content of Polyether Polyols
- ASTM D4672 Determination of Water Content of Polyols
- ASTM D5988-18 Determining Aerobic Biodegradation of Plastic Materials in Soil
- ASTM D5526-18 Biodegradation of Plastic Under Accelerated Landfill Conditions
- ASTM D5511-18 Biodegradation of Plastic Under High-Solids Anaerobic Conditions
- ASTM D5338-15 Determining Aerobic Biodegradation of Plastic Materials
- ASTM D1042-12 Standard test for Changes of Plastics Caused by Exposure to Heat and Moisture
- ASTM D570 Water absorption of plastics
- ASTM D8036-16 Determination of dimer ratio in pure MDI
- ASTM D7253-16 Determination of Acidity as Acid Number for Polyether Polyols
- ASTM D7252-17 Determination of Monomer and Isomers in Isocyanates
- ASTM D7133-21 Tristimulus CIELAB Color and Yellowness Index of Liquids
- ASTM C773 Compressive Strength of Fired Whiteware Materials
- ASTM E824–10 Transfer of Calibration from Reference to Field Radiometers
- ASTM E816-05 Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
- ASTM E815−11 Determination of Calcium Fluoride in Fluorspar by Complexometric Titrimetry
- ASTM E806−08 Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)
- ASTM E794−06 Melting and Crystallization Temperatures by Thermal Analysis
- ASTM E793−06 Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
- ASTM E780–06 Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples, and Thermocouple Cable at Room Temperature
- ASTM E756-05 Measuring Vibration-Damping Properties of Materials
- ASTM E738-11 Aluminum in Iron Ores by EDTA Complexometric Titrimetry
- ASTM E736-00 Cohesion/Adhesion of Fire-Resistive Materials
- ASTM E680-79 Drop Weight Impact Sensitivity of Hazardous Materials
- ASTM E662-14 Specific Optical Density of Smoke
- ASTM E648 Critical Radiant Flux of Floor-Covering Systems
- ASTM E647 − 13a Measurement of Fatigue Crack Growth Rates
- ASTM E646 − 07 Tensile Strain-Hardening Exponents of Metal
- ASTM E644 − 11 Testing Industrial Resistance Thermometers
- ASTM E643 − 09 Ball Punch Deformation of Metallic Sheet Material
- ASTM E637 – 05 Calculation of Stagnation Enthalpy
- ASTM E618 – 07 Evaluating Machining Performance
- ASTM E606/E606M – 12 Strain-Controlled Fatigue Testing
- ASTM E605 – 93 Thickness and Density of Sprayed Fire-Resistive Material
- ASTM E604 – 83 Tear Testing of Metallic Materials
- ASTM E601-07a Measuring Electromotive Force Stability of Base-Metal Thermoelement Materials
- ASTM E596-96 Laboratory Measurement of Noise Reduction of Sound- Isolating Enclosures
- ASTM E595-07 Total Mass Loss and Collected Volatile Condensable Materials from Outgassing
- ASTM E581-10 Chemical Analysis of Manganese-Copper Alloys
- ASTM E579-04 Limit of Detection of Fluorescence of Quinine Sulfate in Solution
- ASTM E578-07 Linearity of Fluorescence Measuring Systems
- ASTM E572-13 Analysis of steel alloys by fluorescence spectrometry
- ASTM E556-11 Calibrating a Wheel Force by using Calibration Platform
- ASTM E576-08 Frost/dew point of sealed insulating glass
- ASTM E561-10 Standard test for K-R curve determination
- ASTM E534 – 13 Chemical Analysis of Sodium Chloride
- ASTM E537 – 12 Thermal Stability of Chemicals by Differential Scanning Calorimetry
- ASTM E536 – 08 Chemical Analysis of Zinc and Zinc Alloys
- ASTM E 517 – 00 Plastic Strain Ratio r for Sheet Metal
- ASTM E511 – 07 Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
- ASTM E508 – 13 Calcium and Magnesium determination in Iron Ores by Flame Atomic Absorption Spectrometry
- ASTM E539 – 11 Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry
- ASTM E545-14 Image Quality in Neutron by Radiographic Examination
- ASTM E507 – 13 Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
- ASTM E502 – 07 Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
- ASTM E478 – 08 Standard Test Methods for Chemical Analysis of Copper Alloys
- ASTM E477 – 13 Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
- ASTM E475 – 10 Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography
- ASTM E 471–96 Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
- ASTM E465 – 11 Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry
- ASTM D6975 – 04 test method for Cummins M11 Exhaust Gas Recirculation Test (EGR)
- ASTM E463 – 09 Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrometry
- ASTM D7109-12 Shear Stability of Polymer Containing Fluids
- ASTM D7105-06 Determining the Adhesive and Cohesive Strength
- ASTM D7093-13 Formability of thin-film organic coatings on Steel
- ASTM D7087-05a An Imaging Technique to Measure Rust Creepage at Scribe
- ASTM D7035-10 Analysis of airborne particulate matter for metals and metalloids by ICP-AES
- ASTM D7030-04 Short Term Creep Performance of Corrugated Fibreboard Containers under constant load
- ASTM D7029-09 Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0°F (82.2°C)
- ASTM D7028-07 Glass Transition Temperature of Polymer Matrix Composites
- ASTM D7027-13 Evaluation of Scratch Resistance of Polymeric Coatings and Plastics
- ASTM D6991-05 Measurement of Internal Stresses in Organic Coatings
- ASTM D6943-10 Immersion testing of industrial Protective coatings
- ASTM 6906-12a Determination of titanium treatment weight on metal substrates
- ASTM D6905-03 Impact Flexibility of Organic Coatings
- ASTM D6903-07 Methods for Determination of Organic Biocide Release Rate from Antifouling Coatings in Substitute Ocean Water
- ASTM D6902-04 Test method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
- ASTM D6875-12 Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor
- ASTM D6869-03 Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
- ASTM D6866-12 Biobased content determination of solid, liquid and gaseous samples using radiocarbon analysis
- ASTM D6855-12 Method for Determination of Turbidity Below 5 NTU in Static Mode
- ASTM D6845-12 Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
- ASTM D6844-10 Test Method for silanes used in rubber formulations
- ASTM D6843-10 Method used for silanes and is used in rubber formulations
- ASTM D6834-02 Test method for determining Product Leakage from a Package with a Mechanical Pump Dispenser
- ASTM D6979-18 Basicity in Polyols, Expressed as Percent Nitrogen
- ASTM D6437 Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols)
- ASTM D6226-21 Open Cell Content of Rigid Cellular Plastics
- ASTM D6099-18 Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
- ASTM D5672 Testing Flexible Cellular Materials Measurement of Indentation Force Deflection
- ASTM D5629-16 Determination of Acidity in Low-Acidity Aromatic Isocyanates and polyurethane
- ASTM D5523-21 Acidity by Argentometric Determination of Hydrolyzable Chlorine in Aromatic Isocyanates
- ASTM D4889-21 Determination of Viscosity of Crude or Modified Isocyanates
- ASTM A572/A572M-21 High-Strength Low-Alloy Columbium-Vanadium Structural Steel
- ASTM A709/A709M-21 Specification for Structural Steel for Bridges
- ASTM A105/A105M-21 Carbon Steel Forgings for Piping Applications
- ASTM A269/A269M-15a Seamless and Welded Austenitic Stainless Steel Tubing
- ASTM C920-18 Specification for Elastomeric Joint Sealants
- ASTM A615/A615M-20 Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
- ASTM C109/C109M-21 Compressive Strength of Hydraulic Cement Mortars
- ASTM C94/C94M-21b Specification for Ready-Mixed Concrete
- ASTM A123/A123M-17 Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
- ASTM D4169-22 Performance Testing of Shipping Containers and Systems
- ASTM D3034-21 Type PSM PVC Sewer Pipe and Fittings
- ASTM F963-17 Consumer Safety Specification for Toy Safety
- ASTM A500/A500M-21a Cold-Formed Welded and Seamless Carbon Steel Structural Tubing
- ASTM C136/C136M –19 Method for Sieve Analysis of Fine and Coarse Aggregates
- ASTM A574M-12 Alloy Steel Socket-Head Cap Screws
- ASTM D2000-18 Rubber Products in Automotive Applications
- ASTM D1557 Soil Compaction Characteristics in the Laboratory
- ASTM A182/A182M-21 Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
- ASTM F2413-18 Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear
- ASTM E1417/E1417M-21e1 Standard Practice for Liquid Penetrant Testing
- ASTM D3330/D3330M-04 Test for Peel Adhesion of Pressure-Sensitive Tape
- ASTM A677-16 Specification for Nonoriented Electrical Steel, Fully Processed Types
- ASTM A683-16 Specification for Semiprocessed Non-Oriented Electrical Steel
- ASTM F2100-19 Specification for Performance of Materials Used in Medical Face Masks
- ASTM A370-21 Test Methods and Definitions for Mechanical Testing of Steel Products
- ASTM A1085/A1085M-15 Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
- ASTM F3502-21 Standard Specification for Barrier Face Coverings
- ASTM C39/C39M-21 Compressive Strength of Cylindrical Concrete Specimens
- ASTM A108-18 Steel Bar, Carbon and Alloy, Cold-Finished
- ASTM A513/A513M-20a Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
- ASTM B221-21 Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
- ASTM A276-10 Standard Specification for Stainless Steel Bars and Shapes
- ASTM A240 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and General Applications
- ASTM B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
- ASTM C33 Method for Standard Specification for Concrete Aggregates
- ASTM A967/A967M-17 Chemical Passivation Treatments for Stainless Steel Parts
- ASTM E415 Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
- ASTM A307– 21 Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI
- ASTM D4236 Standard Practice for Labeling Art Materials for Chronic Health Hazards
- ASTM A53/53M-20 Standard Specification for Pipe
- ASTM B209 Method for Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
- ASTM A36 Method for Standard Specification for Carbon Structural Steel
- ASTM D6319 Standard Specification for Nitrile Examination Gloves for Medical Application
- ASTM E363-09 Chemical Analysis of Chromium and Ferrochromium
- ASTM E359-10 Analysis of Soda Ash (Sodium Carbonate)
- ASTM E354-93 Chemical Analysis Iron, Nickel, and Cobalt Alloys
- ASTM E353-93 Chemical Analysis of Stainless, Heat Resisting, Maraging Steel and Other Similar Alloys
- ASTM E342-11 Test method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry.
- ASTM E352-13 Chemical Analysis of Tool Steels
- ASTM E351-13 Chemical Analysis of Cast Iron
- ASTM E350-12 Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
- ASTM E346 Analysis of Methanol
- ASTM E345-93 Standard test method for Tension Testing of Metallic Foil
- ASTM E340 -13 Test method for Macroetching Metals and Alloys
- ASTM E337-02 Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperature)
- ASTM E 328-13 Standard test method for Stress Relaxation for Materials and Structures
- ASTM E314-10 Test method for Determination of Manganese in Iron Ores by Pyrophosphate (Potentiometric) and Periodate (Photometric) Techniques
- ASTM E307-72 Standard Test Method for Normal Spectral Emittance at Elevated temperatures
- ASTM E299-08 Test Method for Trace Amounts of Peroxides in Organic Solvents
- ASTM E303 – 93 Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
- ASTM E298-08 Standard Test Methods for Assay of Organic Peroxides
- ASTM E322-12 Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry
- ASTM E289 – 04 Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
- ASTM E285-08 Method Oxyacetylene Ablation Testing of Thermal Insulation Meterials
- ASTM E279 – 97 Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test
- ASTM E278-01 Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry
- ASTM E258-07 Method Total Nitrogen in Organic Materials by Modified Kjeldahl Method
- ASTM E256-09 Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition
- ASTM D6385-99 Test for Determining Acid-Extractable Content in Activated Carbon by Ashing
- ASTM D6370-99 Compositional Analysis of Rubber by Thermogravimetry (TGA)
- ASTM D6355 -07 Test for Human Repeat Insult Patch Testing of Medical Gloves
- ASTM D6252-98 Test for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
- ASTM D6295-98 Test for Dispensability of Light–Duty Pressure–Sensitive Film Tape
- ASTM D6290-98e1 Test for Color Determination of Plastic Pellets
- ASTM D6284-09 Effects of Chlorine Compounds on rubber
- ASTM D6264-17 Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
- ASTM D6289-13 Test for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
- ASTM D6279-15 Test for Rub Abrasion Mar Resistance of High Gloss Coatings
- ASTM D6267-13 Test for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
- ASTM D6248-98 Test for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
- ASTM D6238-13 Test for Total Oxygen Demand in Water
- ASTM D6266-00 Test for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device
- ASTM D6209-13 Test to determine Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air.
- ASTM D6208-97 Test for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
- ASTM D6204-19a Measurement of Unvulcanized Rheological Properties of Rubber Using Rotorless Shear Rheometers
- ASTM D6203-06 Test for Thermal Stability of Way Lubricants
- ASTM D6194-18 Test for Glow-Wire Ignition of Materials
- ASTM D6191-97 Test to Measure Evolved Formaldehyde from Water Reducible Air-Dry Coatings
- ASTM D6188 Test for Viscosity of Cellulose by Cuprammonium Ball Fall
- ASTM C1466 Test for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted From Ceramic Foodware
- ASTM C1300 Test for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
- ASTM C949 Test for Porosity in Vitreous Whitewares by Dye Penetration
- ASTM C849 Test for Knoop Indentation Hardness of Ceramic Whitewares
- ASTM C848 Test for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance
- ASTM C373 Test for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products, Ceramic Tiles, and Glass Tiles
- ASTM C556 Test for Resistance of Overglaze Decorations to Attack by Detergents
- ASTM C554 Test for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method
- ASTM C424 Test for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
- ASTM C738 Test for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
- ASTM C584 Test for Specular Gloss of Glazed Ceramic Whitewares and Related Products
- ASTM C408 Test for Thermal Conductivity of Whiteware Ceramics
- ASTM C372 Test for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by Dilatometer Method
- ASTM C1525-18 Determining Thermal Shock Resistance of Advanced Ceramics by Water Quenching
- ASTM C370 Test for Moisture Expansion of Fired Whiteware Products
- ASTM C368 Test for Impact Resistance of Ceramic Tableware
- ASTM C1834 Test for Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing at Elevated Temperatures
- ASTM C1684 Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
- ASTM C1576 Test for Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing at Ambient Temperature
- ASTM C1499 Test for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1495 Test for Effects of Surface Grinding on Flexure Strength of Advanced Ceramics
- ASTM C1465 Test for Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
- ASTM E353 Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
- ASTM E2472 Test to Determine Resistance of Metals to Stable Crack Extension
- ASTM E1681 Test for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metals
- ASTM E1457-19e1 Test for Measurement of Creep Crack Growth Times in Metals
- ASTM E1221 Test for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
- ASTM E23 Test for Notched Bar Impact Testing of Metals
- ASTM E1304 Test for Plane-Strain (Chevron-Notch) Fracture Toughness of Metals
- ASTM E1820 Standard Test Method for Measurement of Fracture Toughness
- ASTM E399 Standard Test for Linear-Elastic Plane-Strain Fracture Toughness of Metals
- ASTM E2760-19e1 Standard Test Method for Creep-Fatigue Crack Growth Testing
- ASTM E647 Test for Measurement of Fatigue Crack Growth Rates
- ASTM E606 / E606M Test for Strain-Controlled Fatigue Testing
- ASTM E110 Test for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
- ASTM E384 Test for Microindentation Hardness of Materials
- ASTM E18 Test for Rockwell Hardness of Metallic materials
- ASTM E10 Test for Brinell Hardness of Metallic Materials
- ASTM E1876 Test for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio by Impulse Excitation of Vibration
- ASTM E1875 Test for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio by Sonic Resonance
- ASTM E143 Test for Shear Modulus at Room Temperature
- ASTM E111 Test for Young’s Modulus, Tangent Modulus, and Chord Modulus
- ASTM E238 Test for Pin-Type Bearing Test of Metals
- ASTM E9 Compression Testing of Metallic Materials at Room Temperature
- ASTM E292 Conducting Time-for-Rupture Notch Tension Tests of Materials
- ASTM E1450 Test for Tension Testing of Structural Alloys in Liquid Helium
- ASTM E21 Test for Elevated Temperature Tension Tests of Metallic Materials
- ASTM C1862 Test for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperature
- ASTM E8/E8M Test for Tension Testing of Metallic Materials
- ASTM E70 Determination of the pH of Aqueous Solutions with the Glass Electrode
- ASTM D7867 Measurement of Rotational Viscosity of liquid
- ASTM D7786 Determining Enamel Holdout
- ASTM D7773 Determination of Volatile Inorganic Acids
- ASTM D6186 Oxidation Induction Time of Lubricating Oils
- ASTM D6184 Oil Separation from Lubricating Grease
- ASTM D6175 Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
- STM D6174 Inorganic Sulfate in Surfactants by Potentiometric Lead Titration
- ASTM D6173 Various Anionic Surfactant Actives by Potentiometric Titration
- ASTM D6159 Hydrocarbon Impurities in Ethylene by Gas Chromatography
- ASTM D6150 Estimating Processing Losses of Plastisols and Organosols Due to Volatility
- ASTM D6147 Determination of Force Decay in Vulcanized Rubber and Thermoplastic Elastomer in Compression
- ASTM D6137 Sulfuric Acid Resistance of Polymer Linings
- ASTM D6133 Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Paints and Coatings
- ASTM D6144 Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography
- ASTM D6143 Iron Content of Bisphenol A (4,4’–Isopropylidenediphenol)
- ASTM D6142 Analysis of Phenol by Capillary Gas Chromatography
- ASTM D6139 Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask
- ASTM D6138 Corrosion-Preventive Properties of Lubricating Greases
- ASTM D5656 Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM D3658 Torque Strength of Ultraviolet Light-Cured Glass/Metal Adhesive Joints
- ASTM D3528 Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
- ASTM D3433 Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
- ASTM D3310 Determining Corrosivity of Adhesive Material
- ASTM D3167 Floating Roller Peel Resistance of Adhesives
- ASTM D3166 Fatigue Properties of Adhesives in Shear by Tension Loading
- ASTM D3165 Strength Properties of Adhesives in Shear by Tension Loading
- ASTM D2919 Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
- ASTM E252 Thickness of Foil, Thin Sheet, and Film by Mass Measurement
- ASTM E251 Performance Characteristics of Metallic Bonded Resistance Strain Gauges
- ASTM E248 Determination of Manganese in Manganese Ores
- ASTM E247 Determination of Silica in Manganese Ores, Iron Ores, and Related Materials
- ASTM E246 Determination of Iron in Iron Ores and Related Materials
- ASTM E224 Analysis of Hydrochloric Acid
- ASTM E208 Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
- ASTM E202 Test Method for Analysis of Ethylene Glycols and Propylene Glycols
- ASTM E223 Analysis of Sulfuric Acid
- ASTM E222 Determination of Hydroxyl Groups
- ASTM E220 Calibration of Thermocouples By Comparison Techniques
- ASTM E181-10 Test method for Detector Calibration and Analysis of Radionuclides
- ASTM E207 Thermal EMF Test of Single Thermo-element Materials
- ASTM E194 Method for Acid-Insoluble Content of Copper and Iron Powders
- ASTM E162 Surface Flammability of Materials Using a Radiant Heat Energy Source
- ASTM E159 Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
- ASTM E139 Creep, Creep Rupture and, Stress Rupture Test of Metallic Materials
- ASTM E132 Test Method for Poisson’s Ratio at Room Temperature
- ASTM E128 Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
- ASTM E126 Inspection, Calibration, and Verification of ASTM Hydrometers
- ASTM E119 Fire Tests of Building Construction and Materials
- ASTM E90 Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
- ASTM E84 Test Method for Surface Burning Characteristics
- ASTM E82 Test Method for Determining the Orientation of a Metal Crystal
- ASTM E81 Test Method for Preparing Quantitative Pole Figure
- ASTM E77 Inspection and Verification of Thermometers
- ASTM E69 Combustible Properties of Treated Wood by the Fire-Tube Apparatus
- ASTM E53 Determination of Copper in Unalloyed Copper by Gravimetry
- ASTM E45 Determining the Inclusion Content of Steel
- ASTM E37 Chemical Analysis of Pig Lead
- ASTM E34 Chemical Analysis of Aluminum and Aluminum-Base Alloys
- ASTM E23 Notched Bar Impact Testing of Metallic Materials
- ASTM E21 Elevated Temperature Tension Tests of Metallic Materials
- ASTM E18 Rockwell Hardness of Metallic Materials
- ASTM E10 Determining the Brinell hardness of Metallic Materials
- ASTM D7912 Resistance of Finish to Heat Aging
- ASTM D7884 Determination of Carboxybenzaldehyde and Toluic Acid
- ASTM D7854 Standard Test Method for Carbon Black-Void Volume at Mean Pressure
- ASTM D7907 Determination of Bactericidal Efficacy of Medical Gloves
- ASTM D7842/D7842M Holding Strength of Tack and Prong Fastener Attached Buttons
- ASTM D7811 Bow and Skew Using a Measuring Tool
- ASTM D7836 Measurement of Yield Stress of Paints, Inks, and Related Liquid Materials
- ASTM D7835/D7835M Solvent Resistance of an Organic Coating using a Mechanical Rubbing Machine
- ASTM D7834 Standard Test Method for Filling Material Shedding of Paint Brushes
- ASTM D7804 Fiber Shedding of Paint Roller Covers
- ASTM D7791 Uniaxial Fatigue Properties of Plastics
- ASTM D7774 Flexural Fatigue Properties of Plastics
- ASTM D7723 Macro-Dispersion of Fillers in Compounds
- ASTM D7710 Determination of Volume and Density of Rigid Material
- ASTM D7709 Measuring Water Vapor Transmission Rate of Pharmaceutical Bottles
- ASTM D7704 Determining total Aldehydes in Styrene Monomer
- ASTM D7705 Alkali Resistance of Fiber Reinforced Polymer used in Construction
- ASTM D7681 Measuring Gradation of Glass Spheres using a Stream Digital Image Analyzer 
- ASTM D7661 Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
- ASTM D7646 Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys
- ASTM D7639 Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
- ASTM D7638 Determination of Fatty Acids and Esters in Glycerin
- ASTM D7637 Determination of Glycerin Assay by Titration
- ASTM D7635/7635M Measurement of Thickness of Coatings over Fabric Reinforcement
- ASTM D7617/7617M Transverse Shear Strength of Fiber-Reinforced Polymer Matrix
- ASTM D7514 Ink Stain blocking of Architectural Paint Systems
- ASTM D7513 The Capacity of Mixed Bed Ion Exchange Cartridges
- ASTM D7558 Colorimetric/Spectrophotometric Procedure
- ASTM D7605 Thermoplastic Elastomers-Measurement of Rheological and Dynamic Properties
- ASTM D7536 Dispersive X-ray Fluorescence Spectrometry
- ASTM D7490 Contact Angle Measurements
- ASTM D7773-12 Determination of Volatile Inorganic Acids
- ASTM D7760 Hydraulic Conductivity of Tires
- ASTM D7734/D7734M Open Time of Oxidative Printing Inks
- ASTM D7724 Standard Test Method for Carbon Black
- ASTM D1062 Cleavage Strength of Metal-to-Metal Adhesive Bonds
- ASTM D2739 Volume Resistivity of Conductive Adhesive
- ASTM D2918 Durability Assessment of Adhesive Joints Stressed in Peel
- ASTM D1184 Flexural Strength of Adhesive Bonded Laminated Assemblies
- ASTM D1002 Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens
- ASTM D2674 Analysis of Sulfochromate Etch Solution
- ASTM D2557 Tensile-Shear Strength of Adhesives in the Subzero Temperature
- ASTM D2295 Strength Properties of Adhesives in Shear by Tension Loading
- ASTM D2294 Creep Properties of Adhesives in Shear by Tension Loading
- ASTM D2293 Creep Properties of Adhesives in Shear by Compression Loading
- ASTM D2095 Tensile Strength of Adhesives by Means of Bar and Rod Specimens
- ASTM D1876 Peel Resistance of Adhesives (T-Peel Test)
- ASTM D1781 Climbing Drum Peel for Adhesives
- ASTM D1304 Adhesives Relative to their use as Electrical Insulator
- ASTM D1489 Nonvolatile Content of Aqueous Adhesives
- ASTM D1146 Blocking Point of Potentially Adhesive Layers
- ASTM D1084 Test Methods for Viscosity of Adhesives
- ASTM D4883 Density of Polyethylene by the Ultrasound Technique
- ASTM D7191 Determination of Moisture in Plastics by Relative Humidity
- ASTM D6980 Determination of Moisture in Plastics by Loss in Weight
- ASTM D6953 Antioxidants and Erucamide Slip Additives in Polyethylene
- ASTM D6869 Coulometric and Volumetric Determination of Moisture in Plastics
- ASTM D6645 Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
- ASTM D6474 Molecular Weight Distribution and Molecular Weight Averages of Polyolefins
- ASTM D6247 Analysis of Elemental Content in Polyolefins
- ASTM D6042 Phenolic Antioxidants and Erucamide Slip Additives
- ASTM D5594 Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers
- ASTM D5508 Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins & Nitrile-Butadiene Rubber
- ASTM D5296 Molecular Weight Averages and Molecular Weight Distribution of Polystyrene
- ASTM D5507 Trace Organic Impurities in Monomer Grade Vinyl Chloride
- ASTM D5227 Measurement of Hexane Extractable Content of Polyolefins
- ASTM D5225 Measuring Solution Viscosity of Polymers with a Differential Viscometer
- ASTM D5017 Linear Low-Density Polyethylene (LLDPE) Composition
- ASTM D4754 Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
- ASTM D4603 Inherent Viscosity of Polyethylene Terephthalate (PET)
- ASTM A1108 Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams
- ASTM D950 Test Method for Impact Strength of Adhesive Bonds
- ASTM D903 Test for Peel or Stripping Strength of Adhesive Bonds
- ASTM D897 Test Method for Tensile Properties of Adhesive Bonds
- ASTM D6325 Test for Open Assembly Time of Carpet Mastic Adhesives
- ASTM D6004 Adhesive Shear Strength of Resilient Flooring and Carpet Adhesives
- ASTM D5574 Allowable Mechanical Properties of Wood-Bonding Adhesives for Structural Design
- ASTM D5215 Instrumental Test of Vinyl Flooring Staining by Adhesives
- ASTM D4502 Heat and Moisture Resistance of Wood-Adhesive Joints
- ASTM D4027 Shear Properties of Structural Adhesives by Modified Rail Test
- ASTM D3983 Measuring Adhesive Strength and Shear Modulus by Thick-Adherend Tensile Test
- ASTM D3931 Strength Test of Gap-Filling Adhesive Bonds in Shear by Compression Loading
- ASTM D3632 Accelerated Aging of Adhesive Joints by Oxygen-Pressure Test
- ASTM D1995 Methods for Multi-Modal Strength Testing of Autohesives
- ASTM D5868 Lap Shear Adhesion Test for Fiber Reinforced Plastic
- ASTM D5041 Fracture strength in Cleavage of Adhesives in Bonded Joints
- ASTM D4501 Adhesive Shear Strength between Rigid Substrates by Block-Shear Method
- ASTM D3164 Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints
- ASTM D5649 Torque Strength of Adhesives Used on Threaded Fasteners
- ASTM D3163 Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints
- ASTM D5648 Torque-Tension Relationship of Adhesives on Threaded Fasteners
- ASTM D4562 Adhesives Shear Strength Using Pin-and-Collar Specimen
- ASTM D4670 Determination of Suspended Matter in Polyols
- ASTM D4669 Determination of Specific Gravity of Polyols
- ASTM D4663 Determination of Hydrolyzable Chlorine of Isocyanates
- ASTM D4662 Determination of Acid and Alkaline Numbers of Polyols
- ASTM D4661 Determination of Total Chlorine in Isocyanates
- ASTM D4660 Determination of the Isomer Content of Toluene diisocyanate
- ASTM D4659 Determination of Specific Gravity of Isocyanates
- ASTM D4274 Determination of Hydroxyl Numbers of Polyols
- ASTM D4273 Determination of Primary Hydroxyl Content of Polyether Polyols
- ASTM D3769 Microcellular Urethanes High-Temperature Sag
- ASTM D3768 Microcellular Urethanes Flexural Recovery
- ASTM D3576-20 The cell size of Rigid Plastics
- ASTM D3575 Flexible Cellular Materials Made from Olefin Polymers
- ASTM D3574 Flexible Cellular Materials – Slab, Bonded, and Molded Urethane Foams
- ASTM D3489 Microcellular Urethane Materials
- ASTM D2842 Water Absorption of Rigid Cellular Plastics
- ASTM D2126 Response of Rigid Cellular Plastics to Thermal and Humid aging
- ASTM D1623 Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
- ASTM D1622 Apparent Density of Rigid Cellular Plastics
- ASTM D1621 Compressive Properties of Rigid Cellular Plastics
- ASTM D8280 Determination of the Blooming of Brominated Flame Retardants by Ion Chromatography
- ASTM D8133 Determination of Low-Level Phthalates in PVC Plastics by Solvent Extraction
- ASTM D7823 Determination of Low-Level Phthalates in PVC Plastics by Thermal Desorption
- ASTM D3749 Vinyl Chloride Monomer determination in PVC by Gas Chromatographic Headspace technique
- ASTM D1921 Particle Size (Sieve Analysis) of Plastic Materials
- ASTM A938 Torsion Testing of Wire
- ASTM A923 Detrimental Intermetallic Phase in Duplex Ferritic Stainless Steels
- ASTM E2903 Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes
- ASTM C1259 Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics
- ASTM D746 Brittleness Temperature
- ASTM D4443 Residual Vinyl Chloride Monomer Content
- ASTM D4275 Butylated Hydroxy Toluene in Polymers of Ethylene and Ethylene–Vinyl Acetate
- ASTM D4218 Determination of Carbon Black Content in Polyethylene Compounds
- ASTM D4001 Average Molecular Weight of Polymers By Light Scattering
- ASTM E1815 Classification of Film Systems for Industrial Radiography
- ASTM E1695 Computed Tomography (CT) System Performance
- ASTM E1165 Focal Spots of Industrial X-Ray Tubes
- ASTM E2971 Determining Boron-10 Areal Density
- ASTM E803 L/D Ratio of Neutron Radiography Beams
- ASTM E2861 Beam Divergence and Alignment
- ASTM E561 Determination of Resistance to Fracturing of Metallic Materials by R-curves
- ASTM E545 Determining the Image Quality
- ASTM E1004 Determining Electrical Conductivity
- ASTM E436 Drop-Weight Tear Tests
- ASTM E1922 Translaminar Fracture Toughness of Polymers
- ASTM E3039 Determination of Crack-Tip-Opening Angle
- ASTM E2899 Measurement of Initiation Toughness in Surface Cracks
- ASTM E1921 Determination of Reference Temperature for Ferritic Steels
- ASTM E3098 Mechanical Uniaxial Pre-strain and Thermal Recovery of Shape Memory Alloys
- ASTM E3097 Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
- ASTM E2948 Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
- ASTM E2714 Creep-Fatigue Testing
- ASTM E2246 Strain gradient measurements of thin films using an Optical Interferometer
- ASTM E2245 Residual Strain Measurements of Reflecting Films using an Optical Interferometer
- ASTM E2244 Length Measurements of Reflecting Films using an Optical Interferometer
- ASTM F76 Determining Resistivity, Hall Coefficient, and Mobility
- ASTM E837 Determining Residual Stresses by the Hole Drilling Strain-Gage Method
- ASTM D3591 Logarithmic Viscosity Number of Poly Vinyl Chloride (PVC)
- ASTM D3124 Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
- ASTM D1895 Apparent Density, Bulk Factor, and Pour ability of Plastic Materials
- ASTM D1601 Dilute Solution Viscosity of Ethylene Polymers
- ASTM D1505 The density of Plastics by the Density-Gradient Technique
- ASTM A931 The tension of wire ropes and strands
- ASTM A1081 Evaluating Bond of Seven-Wire Steel Prestressing Strand
- ASTM D494 Acetone Extraction of Phenolic Products
- ASTM A1061 Testing Multi-Wire Steel Prestressing Strand
- ASTM A1034 Testing Mechanical Splices for Steel Reinforcing Bars
- ASTM A1032 Hydrogen Embrittlement Resistance for Steel Wire
- ASTM A754 Metallic Coatings on Steel by X-Ray Fluorescence
- ASTM A428 Weight of coating on aluminum-coated iron or steel articles
- ASTM A90 Zinc Coating Mass Test
- ASTM A1084 Detecting Detrimental Phases in Lean Duplex Ferritic Stainless Steels
- ASTM A1058 Mechanical Testing of Steel Products-Metric
- ASTM F2877 Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum
- ASTM A991 Conducting Temperature Uniformity Surveys
- ASTM E1935 Calibrating and Measuring CT Density
- ASTM C1351M Measurement of Viscosity of Glass by Viscous Compression
- ASTM C1730 Nanoparticles of Ceramics Using X-Ray Gravity Sedimentation
- ASTM C371 Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
- ASTM C324 Determination of Free Moisture in Ceramic Clays
- ASTM C326 Drying and Firing Shrinkage of Ceramic Whiteware Clays
- ASTM C1274 Determination of ceramic surface area through physical adsorption
- ASTM F218 Optical Retardation and Analyzing Stress in Glass
- ASTM C323 Chemical Analysis of Ceramic Clays
- ASTM C1494 Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
- ASTM C1070 Particle Size Distribution of Alumina by Laser Light Scattering
- ASTM C1350M Viscosity of Glass by Beam Bending (Metric)
- ASTM C770 Measurement of Glass Stress—Optical Coefficient
- ASTM C730 Knoop Indentation Hardness of Glass
- ASTM C729 Method to Find Density of Glass by Sink-Float Comparator
- ASTM C693 Method to Calculate Density of Glass by Buoyancy
- ASTM C338-93 Assessing the Softening Points of Glass
- ASTM C336 Fiber Elongation to check Annealing and Strain Point of Glass
- ASTM C158-02 Determination of Modulus of Rupture of Glass
- ASTM C1652 Optical Distortion measurement in Flat Glass by Digital Photography
- ASTM C1651 Roll Wave Distortion measurement in Heat-Treated Flat Glass
- ASTM D116 Vitrified Ceramics for Electrical Applications
- ASTM C1607 Checking the Suitability of Ceramicware for use in Microwave
- ASTM C1606 TCLP Testing for Container Glassware
- ASTM C1605 WDXRF Spectrometry for Chemical Analysis of Ceramic Materials
- ASTM C1424 Monotonic Compressive Strength of Advanced Ceramics
- ASTM C1421 Fracture Toughness of Advanced Ceramics
- ASTM C1368 Slow Crack Growth Parameters of Advanced Ceramics
- ASTM C1366 Tensile Strength of Monolithic Advanced Ceramics
- ASTM C1327 Vickers Indentation Hardness of Advanced Ceramics
- ASTM C1326 Knoop Indentation Hardness of Advanced Ceramics
- ASTM C1291 test for Elevated Temperature Tensile Creep Strain, Rate, and Time-to-Failure for Monolithic Advanced Ceramics
- ASTM C1273 Tensile Strength of Monolithic Advanced Ceramics
- ASTM C1211 Flexural Strength of Advanced Ceramics at Elevated Temperatures
- ASTM C1198 Dynamic Young’s Modulus, Shear Modulus & Poisson’s Ratio for Ceramics
- ASTM C1203 Determination of Alkali Resistance of a Ceramic-Glass Enamel
- ASTM C978 Photoelastic Determination of Residual Stress in a Glass Matrix
- ASTM C927 Lead and Cadmium Externally Decorated with Ceramic Glass Enamels
- ASTM C777 Sulfide Resistance of Ceramic Decorations on Glass
- ASTM C735 Acid Resistance of Ceramic Decorations on Glass Containers
- ASTM C724 Acid Resistance of Ceramic Decoration on Architectural Glass
- ASTM C676 Detergent Resistance of Ceramic Decorations
- ASTM C675 Alkali Resistance of Ceramic Decorations
- ASTM C1161 Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM D5452 Particulate Contamination in Aviation Fuels by Laboratory Filtration
- ASTM B311 Density of Powder Materials Containing Less Than Two Percent Porosity
- ASTM E203 Test Method for Water Using Volumetric Karl Fischer Titration
- ASTM D6625 Protective Properties of Polish Applied to a Painted Panel
- ASTM D3045 Heat Aging Test of Plastics Without Load
- ASTM D522 Mandrel Bend Test of Attached Organic Coatings
- ASTM D6055 Mechanical Handling of Unitized Loads and Shipping Cases and Crates
- ASTM D3363 Film Hardness
- ASTM D2244 Calculating Color Differences
- ASTM D3389 Coated Fabrics Abrasion Resistance
- ASTM B117 Salt Spray (Fog) Testing
- ASTM D5151 Detection of Holes in Medical Gloves
- ASTM G85 Modified Salt Spray (Fog) Testing
- ASTM D5894 Cyclic Salt Fog/UV Exposure of Painted Metal
- ASTM D1654 Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
- ASTM D1822 Tensile-Impact Energy test
- ASTM G21 Resistance of Synthetic Polymeric Materials to Fungi
- ASTM D5511 Anaerobic Biodegradation of Plastic Materials
- ASTM D5338 Determining Aerobic Biodegradation
- ASTM D1494 Diffuse Light Transmission Factor
- ASTM D1475 Density of Liquid Coatings, Inks
- ASTM D2794 Resistance of Organic Coatings
- ASTM D3273 Resistance to Growth of Mold
- ASTM D4541 Pull-Off Strength of Coatings
- ASTM D5895 Drying or Curing During Film Formation of Organic Coatings
- ASTM D7234 Pull-Off Adhesion Strength
- ASTM E2141 Accelerated Aging of Electrochromic Devices in Sealed Glass Units
- ASTM D2290 Apparent Hoop Tensile Strength
- ASTM D1598 Time-to-Failure of Plastic Pipes
- ASTM D5528 Mode I Interlaminar Fracture Toughness
- ASTM D6742 Filled-Hole Tension and Compression Testing
- ASTM D7291 Through-Thickness Flatwise Tensile Strength and Elastic Modulus
- ASTM D1415 Rubber Hardness Test
- ASTM D454 Test for Rubber Deterioration
- ASTM D573 Test for Rubber Deterioration in an Air Oven
- ASTM G65 Abrasion Test Using the Dry Sand/Rubber Wheel Apparatus
- ASTM D1037 Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
- ASTM D1823 Apparent Viscosity of Plastisols and Organosols
- ASTM C1326 Knoop indentation hardness of ceramics
- ASTM C1327 Vickers indentation hardness of ceramics
- ASTM C1323 Strength of Diametrically Compressed C-ring
- ASTM C1674 Flexural Strength With Engineered Porosity
- ASTM C1292 Shear Strength of Continuous Fiber-Reinforced Ceramics
- ASTM C1337 Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading
- ASTM C1341 Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
- ASTM C1510 Spectrophotometry for Color Assessment
- Evolved Gas Analysis (EGA)
- ASTM C539 Test for Linear Thermal Expansion by Interferometric Method
- ASTM C177 Test to determine Steady-State Heat Flux by Guarded-Hot-Plate Apparatus
- ASTM F77 Test for Apparent Density of Ceramics
- ASTM C329 Test for Specific Gravity of Fired Ceramic Whiteware Materials
- ASTM D2520 Test for Complex Permittivity of Solid Electrical Insulating Materials
- ASTM D2149 Test for Dielectric Constant and Dissipation Factor of Dielectrics
- ASTM C730 Standard Test for Knoop Indentation Hardness of Glass
- ASTM F417 Test for Modulus of Rupture of Electronic-Grade Ceramics
- ASTM C1505 Determining Breaking Strength or Modulus of Rupture of Tiles
- ASTM C1525 Determining Thermal Shock Resistance of Advanced Ceramics by Water Quenching
- ASTM C674 Determining Flexural Properties of Ceramic Whiteware
- ASTM C623 Test for Elastic Properties of Glass and Glass-Ceramic by Resonance
- ASTM C1624 Adhesion Strength and Mechanical Failure
- ASTM E2298 Instrumented Impact Testing of Metallic Materials
- ASTM E290 Bend Testing of Material for Ductility
- ASTM E18 Rockwell Hardness of Metallic Materials
- ASTM A255 Determining Hardenability of Steel
- ASTM A1038 Portable Hardness Testing by UCI Method
- ASTM A833 Indentation Hardness of Metallic Materials
- Tensile Fiber-Reinforced Ceramic Test by ASTM C1275
- ASTM F3039 Detecting Leaks in Nonporous Packaging by Dye Penetration
- Test for Electrical Resistance of Ceramics at Elevated Temperatures ASTM D1829
- Brinell Hardness of Metallic Materials ASTM E10
- Rockwell and Brinell Hardness of Metallic Materials ASTM E110
- ASTM E190 Guided Bend Test for Ductility of Welds
- ASTM E384 Microindentation Hardness of Materials
- ASTM E618 Machining Performance of Ferrous Metals
- ASTM G48 Pitting and Crevice Corrosion Resistance of Stainless Steels
- ASTM E572 Analysis of Stainless and Alloy Steels by WDXRF
- ASTM E1086 Spark Atomic Emission Spectrometry for Steel Analysis
- ASTM A944 Bond strength of steel reinforcing bars
- ASTM C679 Test for Tack-Free Time of Elastomeric Sealants
- ASTM C1358 Test for Compressive Strength of Advanced Ceramics
- ASTM C1359 Test for Tensile Strength of Advanced Ceramics at Elevated Temperatures
- ASTM C1425 Test for Interlaminar Shear Strength of Advanced Ceramics at Elevated Temperatures
- ASTM C1468 Test for Transthickness Tensile Strength of Advanced Ceramics
- ASTM C1469 Test for Shear Strength of Joints of Advanced Ceramics
- ASTM C1773 Test for Monotonic Axial Tensile Behavior of Advanced Ceramic Tubes
- ASTM C1863 Test for Hoop Tensile Strength of Advanced Ceramic Tube Using Direct Pressurization
- ASTM C1869 Test for Open-Hole Tensile Strength of Advanced Ceramics
- ASTM C146 Chemical Analysis of Glass Sand
- ASTM C225 Test Methods for Resistance of Glass Containers to Chemical Attack
- ASTM C429 Test for Sieve Analysis of Raw Materials for Glass Manufacture
- ASTM C813 Test for Hydrophobic Contamination on Glass by Contact Angle Measurement
- ASTM C1279 Test for Edge and Surface Stresses in Tempered Flat Glass
- ASTM C1901 Test for Measuring Optical Retardation in Flat Architectural Glass
- ASTM C149 Test for Thermal Shock Resistance of Glass Containers
- ASTM C147 Test for Internal Pressure Strength of Glass Containers
- ASTM C1819 Test for Hoop Tensile Strength of Advanced Ceramic Composite Tubes Using Elastomeric Inserts
- ASTM A956 Leeb Hardness Testing of Steel Products
- Measuring Adhesion by Tape Test ASTM D3359
- Determination of the Mode II Interlaminar Fracture Toughness of Polymer Composites ASTM D7905
- Specific Heat Capacity by Differential Scanning Calorimetry ASTM E1269
- ASTM E606 Strain-Controlled Fatigue Test
- Sandwich Corrosion Test of Aircraft Maintenance Materials ASTM F1110
- Nonvolatile Matter in Volatile Solvent by ASTM D1353
- ASTM C1421 Fracture Toughness at ambient temperature
- ASTM C1525 Thermal Shock Resistance by Water Quenching
- ASTM E112 Determination of Average Grain Size
- Combustibility of Building Materials ASTM E2652
- Determination of Bacteria-Eliminating Effectiveness ASTM E2755
- Small Punch Testing of Metallic Materials ASTM E3205
- Wear Testing of Polymeric Materials by ASTM F732
- Tension & Elongation of Elastic Fabric by ASTM D4964
- ASTM C518 Steady-State Thermal Transmission Properties
- Test to determine the amount of Moisture in a Graphite Sample ASTM C562
- Coating Flexibility of Prepainted Sheet ASTM D4145
- ASTM D3170 Chip Resistance
- Medical Mask Bacterial filtration test ASTM F2101
- Test to determine Mohs Scratch Hardness ASTM C1895
- Yellowness Index (YI) ASTM E313
- Infrared Spectroscopy Techniques ASTM E1252, ASTM E168
- ASTM F1249 Water Vapor Transmission Rate
- ASTM F1921 Hot Seal Strength
- Antimicrobial Efficacy Testing ASTM E2180
- Linear Thermal Expansion of solids ASTM E228
- Shear Properties of Composite Materials by V-notched Rail Shear Method ASTM D7078
- Test for Charpy Impact Resistance of Notched Specimens of Plastics ASTM D6110
- Test to Determine Ignition Temperature of Plastics ASTM D1929
- Analysis of Aqueous Extractable Protein in Elastomers ASTM D5712
- Melting Points and the Melting Range of Organic Chemicals ASTM E324
- Seal Strength of Flexible Barrier Materials ASTM F88
- Antigenic Protein in Hevea Natural Rubber ASTM D6499
- Impedance and Absorption of Acoustical Materials ASTM E1050
- Flexural Toughness of Fiber Reinforced Concrete ASTM C1550
- ASTM E96 Water Vapor Transmission
- ASTM D2584, D5630, ISO 3451 Ash Content
- ASTM D1623 Tensile and Tensile Adhesion Properties
- ASTM D5946 Contact Angle Measurements
- ASTM D7264 Flexural Properties of Composites
- Flexural Test Composites Four-Point Bending ASTM D6272
- ASTM D7766 Damage Resistance Test of Sandwich Constructions
- ASTM E1131, ISO 11358 Thermogravimetric Analysis (TGA)
- ASTM E831, ASTM D696 Coefficient of Linear Thermal Expansion
- ASTM D3835 Capillary Rheometry Shear Sweep, Thermal Stability
- ASTM D3846 Shear Strength of Reinforced Plastics
- ASTM D3985 Oxygen Transmission Rate (OTR)
- Dynamic Mechanical Analysis ASTM D4065, D4440, D5279
- ASTM D4226, D5420 Gardner Impact Test
- ASTM G154, ASTM D4329, ASTM D4587, ISO 4892 QUV Accelerated Weathering
- ASTM D5766 Tensile Strength (Open Hole)
- Izod Impact (Unnotched) by ASTM D4812, ISO 180
- V-Notched Shear by ASTM D5379
- ASTM D7249Sandwich Flexural Stiffness
- ASTM D638 Plastics Tensile Testing
- ASTM D648, ISO 75 Heat Deflection Temperature
- ASTM D695, ISO 604 Compression Properties
- ASTM D732 Shear Strength Test
- ASTM D785, ISO 2039 Rockwell Hardness
- ASTM D789, D4878 Relative Viscosity of Polyamide
- ASTM D790, ISO 178 Flexural Properties Testing
- ASTM D792, ISO 1183 Specific Gravity and density
- ASTM D882 Tensile Properties (Sheet)
- ASTM D1002, ASTM D5868, ASTM D3163 for Lap Shear Tests
- ASTM D4459, ASTM D2565, ASTM G155 Xenon-Arc Accelerated Exposure (XAAE)
- ASTM D3039 Tensile Testing of Polymer Matrix Composite Materials
- ASTM D1693 Environmental Stress Cracking Test of Ethylene Plastics
- ASTM D1822 Tensile Impact Test for Plastics
- ASTM D4093 Residual Strain Measurements in Plastics
- ASTM D5023 Dynamic Mechanical Testing of Plastics
- ASTM D6344 Transport Packaging Concentrated Impact
- Test Guide for Oxo-biodegradable Plastics ASTM D6954
- ASTM D3164 Shear by Tension Loading
- ASTM D3410 Compression of Composites
- ASTM D3418, ASTM E1356, ISO 11357 Differential Scanning Calorimetry
- ASTM D3518 Shear Response
- ASTM D3763, ASTM D7192, ISO 6603, ISO 7765 Multiaxial Impact Test
- ASTM D955 Shrinkage From Mold Dimensions
- ASTM D1003 Haze and Transmittance
- ASTM D1004 Tear Resistance
- ASTM D1044 (Haze), ASTM D4060 (Weight Loss) Taber Abrasion
- ASTM D1204 Dimensional Stability
- ASTM D1238, ISO 1133 Melt Flow Rate
- ASTM D1525 Vicat Softening Point of Plastics
- ASTM D1708 Micro Tensile
- ASTM D1603 Carbon Black
- ASTM D1709, ISO 7765 Drop Dart
- ASTM D1894 Coefficient of Friction
- ASTM D1922 Elmendorf Tear Test
- ASTM D2240 Shore Hardness
- ASTM D2344 Short Beam Shear Testing
- ASTM D3012, GM9059P Thermal-Oxidative Stability
- ASTM D2584 Ignition Loss of Cured Reinforced Resins
- ASTM D2734 Void Content of Reinforced Plastics
- ASTM D2583 Barcol Hardness Test
- ASTM C271 Density of Sandwich Core Materials
- ASTM D543 Chemical Compatibility
- ASTM D570 Water Absorption
- ASTM D635, ISO 3795 Flammability
- ASTM D638, ISO 527 Poisson’s Ratio
- ASTM C272 Water Absorption of Core Materials
- ASTM C273 Shear Test (Core) Tension or Compression
- ASTM C297 Tensile Strength of Sandwich Constructions
- ASTM C365 Flatwise Compressive Properties
- ASTM C393 Sandwich Construction Core Shear Properties
- ASTM D149 Dielectric Strength, IEC 60243
- ASTM D150 Dielectric Constant and Dissipation Factor
- ASTM D256 Izod Impact (Notched), ISO 180
- ASTM D257 Surface Resistivity, Volume Resistivity
- ASTM D2863 Oxygen Index
- ASTM D395B Compression Set Testing
- ASTM D412 Tensile Set (Elastomers)
- ASTM D471 Rubber Property and Liquids Effect
- ASTM D2457, ASTM D523 Specular Gloss
- ASTM D542 Transparent Organic Plastic Refractive Index
- Corrosion Testing
- Dielectric Constant
- Digital Radiography
- Eddy Current Testing – ECT
- Electrical Testing
- Failure Analysis
- Impact Testing
- Mechanical Testing
- Non Destructive Testing (NDT) Laboratory
- Optical Testing
- Polymer Material Testing
- Thermal Testing of Materials
- Volatile Organic Compounds Analysis
- Root Cause Analysis – RCA
- Materials Testing Lab
- Compression Testing
- Combustion Analysis
- Chemical Analysis
- Coefficient of Friction (COF)
- Category: Acoustic material
- Category: Ceramics
- ASTM C773 Compressive Strength of Fired Whiteware Materials
- ASTM C33 Method for Standard Specification for Concrete Aggregates
- ASTM C1466 Test for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted From Ceramic Foodware
- ASTM C1300 Test for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
- ASTM C949 Test for Porosity in Vitreous Whitewares by Dye Penetration
- ASTM C849 Test for Knoop Indentation Hardness of Ceramic Whitewares
- ASTM C848 Test for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance
- ASTM C373 Test for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products, Ceramic Tiles, and Glass Tiles
- ASTM C556 Test for Resistance of Overglaze Decorations to Attack by Detergents
- ASTM C554 Test for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method
- ASTM C424 Test for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
- ASTM C738 Test for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
- ASTM C584 Test for Specular Gloss of Glazed Ceramic Whitewares and Related Products
- ASTM C408 Test for Thermal Conductivity of Whiteware Ceramics
- ASTM C372 Test for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by Dilatometer Method
- ASTM C1525-18 Determining Thermal Shock Resistance of Advanced Ceramics by Water Quenching
- ASTM C370 Test for Moisture Expansion of Fired Whiteware Products
- ASTM C368 Test for Impact Resistance of Ceramic Tableware
- ASTM C1834 Test for Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing at Elevated Temperatures
- ASTM C1684 Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
- ASTM C1576 Test for Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing at Ambient Temperature
- ASTM C1499 Test for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1495 Test for Effects of Surface Grinding on Flexure Strength of Advanced Ceramics
- ASTM C1465 Test for Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
- ASTM C1862 Test for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperature
- ASTM C1259 Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics
- ASTM C1351M Measurement of Viscosity of Glass by Viscous Compression
- ASTM C1730 Nanoparticles of Ceramics Using X-Ray Gravity Sedimentation
- ASTM C371 Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
- ASTM C324 Determination of Free Moisture in Ceramic Clays
- ASTM C326 Drying and Firing Shrinkage of Ceramic Whiteware Clays
- ASTM C1274 Determination of ceramic surface area through physical adsorption
- ASTM F218 Optical Retardation and Analyzing Stress in Glass
- ASTM C323 Chemical Analysis of Ceramic Clays
- ASTM C1494 Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
- ASTM C1070 Particle Size Distribution of Alumina by Laser Light Scattering
- ASTM C1350M Viscosity of Glass by Beam Bending (Metric)
- ASTM C770 Measurement of Glass Stress—Optical Coefficient
- ASTM C730 Knoop Indentation Hardness of Glass
- ASTM C729 Method to Find Density of Glass by Sink-Float Comparator
- ASTM C693 Method to Calculate Density of Glass by Buoyancy
- ASTM C338-93 Assessing the Softening Points of Glass
- ASTM C336 Fiber Elongation to check Annealing and Strain Point of Glass
- ASTM C158-02 Determination of Modulus of Rupture of Glass
- ASTM C1652 Optical Distortion measurement in Flat Glass by Digital Photography
- ASTM C1651 Roll Wave Distortion measurement in Heat-Treated Flat Glass
- ASTM D116 Vitrified Ceramics for Electrical Applications
- ASTM C1607 Checking the Suitability of Ceramicware for use in Microwave
- ASTM C1606 TCLP Testing for Container Glassware
- ASTM C1605 WDXRF Spectrometry for Chemical Analysis of Ceramic Materials
- ASTM C1424 Monotonic Compressive Strength of Advanced Ceramics
- ASTM C1421 Fracture Toughness of Advanced Ceramics
- ASTM C1368 Slow Crack Growth Parameters of Advanced Ceramics
- ASTM C1366 Tensile Strength of Monolithic Advanced Ceramics
- ASTM C1327 Vickers Indentation Hardness of Advanced Ceramics
- ASTM C1326 Knoop Indentation Hardness of Advanced Ceramics
- ASTM C1291 test for Elevated Temperature Tensile Creep Strain, Rate, and Time-to-Failure for Monolithic Advanced Ceramics
- ASTM C1273 Tensile Strength of Monolithic Advanced Ceramics
- ASTM C1211 Flexural Strength of Advanced Ceramics at Elevated Temperatures
- ASTM C1198 Dynamic Young’s Modulus, Shear Modulus & Poisson’s Ratio for Ceramics
- ASTM C1203 Determination of Alkali Resistance of a Ceramic-Glass Enamel
- ASTM C978 Photoelastic Determination of Residual Stress in a Glass Matrix
- ASTM C927 Lead and Cadmium Externally Decorated with Ceramic Glass Enamels
- ASTM C777 Sulfide Resistance of Ceramic Decorations on Glass
- ASTM C735 Acid Resistance of Ceramic Decorations on Glass Containers
- ASTM C724 Acid Resistance of Ceramic Decoration on Architectural Glass
- ASTM C676 Detergent Resistance of Ceramic Decorations
- ASTM C675 Alkali Resistance of Ceramic Decorations
- ASTM C1161 Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1326 Knoop indentation hardness of ceramics
- ASTM C1327 Vickers indentation hardness of ceramics
- ASTM C1323 Strength of Diametrically Compressed C-ring
- ASTM C1674 Flexural Strength With Engineered Porosity
- ASTM C1292 Shear Strength of Continuous Fiber-Reinforced Ceramics
- ASTM C1337 Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading
- ASTM C1341 Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
- ASTM C1510 Spectrophotometry for Color Assessment
- ASTM C539 Test for Linear Thermal Expansion by Interferometric Method
- ASTM F77 Test for Apparent Density of Ceramics
- ASTM C329 Test for Specific Gravity of Fired Ceramic Whiteware Materials
- ASTM F417 Test for Modulus of Rupture of Electronic-Grade Ceramics
- ASTM C1505 Determining Breaking Strength or Modulus of Rupture of Tiles
- ASTM C1525 Determining Thermal Shock Resistance of Advanced Ceramics by Water Quenching
- ASTM C674 Determining Flexural Properties of Ceramic Whiteware
- ASTM C623 Test for Elastic Properties of Glass and Glass-Ceramic by Resonance
- ASTM C1624 Adhesion Strength and Mechanical Failure
- Tensile Fiber-Reinforced Ceramic Test by ASTM C1275
- Test for Electrical Resistance of Ceramics at Elevated Temperatures ASTM D1829
- ASTM C1358 Test for Compressive Strength of Advanced Ceramics
- ASTM C1359 Test for Tensile Strength of Advanced Ceramics at Elevated Temperatures
- ASTM C1425 Test for Interlaminar Shear Strength of Advanced Ceramics at Elevated Temperatures
- ASTM C1468 Test for Transthickness Tensile Strength of Advanced Ceramics
- ASTM C1469 Test for Shear Strength of Joints of Advanced Ceramics
- ASTM C1773 Test for Monotonic Axial Tensile Behavior of Advanced Ceramic Tubes
- ASTM C1863 Test for Hoop Tensile Strength of Advanced Ceramic Tube Using Direct Pressurization
- ASTM C1869 Test for Open-Hole Tensile Strength of Advanced Ceramics
- ASTM C1819 Test for Hoop Tensile Strength of Advanced Ceramic Composite Tubes Using Elastomeric Inserts
- ASTM C1421 Fracture Toughness at ambient temperature
- ASTM C1525 Thermal Shock Resistance by Water Quenching
- Test to determine Mohs Scratch Hardness ASTM C1895
- Category: Chemical Analysis
- ASTM E1788-16 Standard test method for Acidity in Acrylonitrile
- ASTM E1784-08 Total Peroxides in Acrylonitrile
- ASTM E1746-17a Sampling and Analysis of Liquid Chlorine for Gaseous impurities
- ASTM E1659-12 Method for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
- ASTM D6474-12 Molecular Weight Distribution and Averages of Polyolefins
- ASTM D5155-19 Determination of the Isocyanate Content of Aromatic Isocyanates
- ASTM D4890-18 Determination of Gardner and APHA Color of Polyols
- ASTM D4878 Determination of Viscosity of Polyols
- ASTM D4877 Determination of APHA Color in Isocyanates
- ASTM D4671 Determination of Unsaturation of Polyols
- ASTM D4875 Polymerized Ethylene Oxide Content of Polyether Polyols
- ASTM D4672 Determination of Water Content of Polyols
- ASTM D8036-16 Determination of dimer ratio in pure MDI
- ASTM E824–10 Transfer of Calibration from Reference to Field Radiometers
- ASTM E816-05 Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
- ASTM E815−11 Determination of Calcium Fluoride in Fluorspar by Complexometric Titrimetry
- ASTM E806−08 Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)
- ASTM E579-04 Limit of Detection of Fluorescence of Quinine Sulfate in Solution
- ASTM E534 – 13 Chemical Analysis of Sodium Chloride
- ASTM E537 – 12 Thermal Stability of Chemicals by Differential Scanning Calorimetry
- ASTM E508 – 13 Calcium and Magnesium determination in Iron Ores by Flame Atomic Absorption Spectrometry
- ASTM E539 – 11 Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry
- ASTM E545-14 Image Quality in Neutron by Radiographic Examination
- ASTM E477 – 13 Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
- ASTM E475 – 10 Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography
- ASTM E465 – 11 Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry
- ASTM D6975 – 04 test method for Cummins M11 Exhaust Gas Recirculation Test (EGR)
- ASTM D7030-04 Short Term Creep Performance of Corrugated Fibreboard Containers under constant load
- ASTM 6906-12a Determination of titanium treatment weight on metal substrates
- ASTM D6903-07 Methods for Determination of Organic Biocide Release Rate from Antifouling Coatings in Substitute Ocean Water
- ASTM D6875-12 Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor
- ASTM D6869-03 Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
- ASTM D6866-12 Biobased content determination of solid, liquid and gaseous samples using radiocarbon analysis
- ASTM D6437 Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols)
- ASTM D6099-18 Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
- ASTM D5672 Testing Flexible Cellular Materials Measurement of Indentation Force Deflection
- ASTM D5629-16 Determination of Acidity in Low-Acidity Aromatic Isocyanates and polyurethane
- ASTM D5523-21 Acidity by Argentometric Determination of Hydrolyzable Chlorine in Aromatic Isocyanates
- ASTM D4889-21 Determination of Viscosity of Crude or Modified Isocyanates
- ASTM E363-09 Chemical Analysis of Chromium and Ferrochromium
- ASTM E359-10 Analysis of Soda Ash (Sodium Carbonate)
- ASTM E354-93 Chemical Analysis Iron, Nickel, and Cobalt Alloys
- ASTM E353-93 Chemical Analysis of Stainless, Heat Resisting, Maraging Steel and Other Similar Alloys
- ASTM E342-11 Test method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry.
- ASTM E352-13 Chemical Analysis of Tool Steels
- ASTM E351-13 Chemical Analysis of Cast Iron
- ASTM E350-12 Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
- ASTM E346 Analysis of Methanol
- ASTM E299-08 Test Method for Trace Amounts of Peroxides in Organic Solvents
- ASTM E298-08 Standard Test Methods for Assay of Organic Peroxides
- ASTM E258-07 Method Total Nitrogen in Organic Materials by Modified Kjeldahl Method
- ASTM E256-09 Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition
- ASTM D6385-99 Test for Determining Acid-Extractable Content in Activated Carbon by Ashing
- ASTM D6252-98 Test for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
- ASTM D6295-98 Test for Dispensability of Light–Duty Pressure–Sensitive Film Tape
- ASTM D6284-09 Effects of Chlorine Compounds on rubber
- ASTM D6267-13 Test for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
- ASTM D6248-98 Test for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
- ASTM D6238-13 Test for Total Oxygen Demand in Water
- ASTM D6266-00 Test for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device
- ASTM D6209-13 Test to determine Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air.
- ASTM D7773 Determination of Volatile Inorganic Acids
- STM D6174 Inorganic Sulfate in Surfactants by Potentiometric Lead Titration
- ASTM D6173 Various Anionic Surfactant Actives by Potentiometric Titration
- ASTM E224 Analysis of Hydrochloric Acid
- ASTM E202 Test Method for Analysis of Ethylene Glycols and Propylene Glycols
- ASTM E223 Analysis of Sulfuric Acid
- ASTM E222 Determination of Hydroxyl Groups
- ASTM D7638 Determination of Fatty Acids and Esters in Glycerin
- ASTM D7637 Determination of Glycerin Assay by Titration
- ASTM D7773-12 Determination of Volatile Inorganic Acids
- Sandwich Corrosion Test of Aircraft Maintenance Materials ASTM F1110
- Determination of Bacteria-Eliminating Effectiveness ASTM E2755
- Melting Points and the Melting Range of Organic Chemicals ASTM E324
- Category: Construction
- Category: Electrical Insulation and Electronics
- ASTM E1725-19 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
- ASTM E794−06 Melting and Crystallization Temperatures by Thermal Analysis
- ASTM E576-08 Frost/dew point of sealed insulating glass
- ASTM E285-08 Method Oxyacetylene Ablation Testing of Thermal Insulation Meterials
- ASTM D6194-18 Test for Glow-Wire Ignition of Materials
- ASTM D2520 Test for Complex Permittivity of Solid Electrical Insulating Materials
- ASTM C518 Steady-State Thermal Transmission Properties
- Category: General Methods and Instrumentation
- ASTM D5994/D5994M Measuring Core Thickness of Textured Geomembranes
- ASTM C241/C241M Test for Abrasion Resistance of Stone Subjected to Foot Traffic
- ASTM E238 Test Method for Pin-Type Bearing Test of Metallic Materials
- ASTM G151 Standard Guide for Exposing Nonmetallic Materials in Accelerated Test Devices that use Laboratory Light Sources
- Glycol Concentration Testing
- Laser Profilometry
- Ozone Testing
- ASTM E407 Standard Practice for Microetching Metals and Alloys
- ASTM A247 Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
- ASTM E1820-21 Standard test method for measurement of fracture toughness
- ASTM E1787-16 Standard test method for Anions in Caustic Soda and Caustic Potash by Ion Chromatography
- ASTM E1782-14 Determination of Vapour Pressure by Thermal Analysis
- ASTM E1735-19 Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25MeV
- ASTM E1740-22 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
- ASTM E1641-13 Method for Decomposition Kinetics by Thermogravimetry using the Ozawa/Flynn/Wall Method
- ASTM E1640-13 Method for Assignment of the Glass Transition Temperature by Dynamic Mechanical Analysis
- ASTM D6480-05 Test method for determining asbestos in samples wiped from surfaces
- ASTM E793−06 Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
- ASTM E756-05 Measuring Vibration-Damping Properties of Materials
- ASTM E736-00 Cohesion/Adhesion of Fire-Resistive Materials
- ASTM E680-79 Drop Weight Impact Sensitivity of Hazardous Materials
- ASTM E662-14 Specific Optical Density of Smoke
- ASTM E648 Critical Radiant Flux of Floor-Covering Systems
- ASTM E647 − 13a Measurement of Fatigue Crack Growth Rates
- ASTM E644 − 11 Testing Industrial Resistance Thermometers
- ASTM E637 – 05 Calculation of Stagnation Enthalpy
- ASTM E618 – 07 Evaluating Machining Performance
- ASTM E606/E606M – 12 Strain-Controlled Fatigue Testing
- ASTM E605 – 93 Thickness and Density of Sprayed Fire-Resistive Material
- ASTM E596-96 Laboratory Measurement of Noise Reduction of Sound- Isolating Enclosures
- ASTM E595-07 Total Mass Loss and Collected Volatile Condensable Materials from Outgassing
- ASTM E556-11 Calibrating a Wheel Force by using Calibration Platform
- ASTM E561-10 Standard test for K-R curve determination
- ASTM E511 – 07 Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
- ASTM E502 – 07 Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
- ASTM E 471–96 Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
- ASTM E463 – 09 Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrometry
- ASTM D7105-06 Determining the Adhesive and Cohesive Strength
- ASTM D6855-12 Method for Determination of Turbidity Below 5 NTU in Static Mode
- ASTM C109/C109M-21 Compressive Strength of Hydraulic Cement Mortars
- ASTM C94/C94M-21b Specification for Ready-Mixed Concrete
- ASTM D4169-22 Performance Testing of Shipping Containers and Systems
- ASTM D3034-21 Type PSM PVC Sewer Pipe and Fittings
- ASTM F963-17 Consumer Safety Specification for Toy Safety
- ASTM C136/C136M –19 Method for Sieve Analysis of Fine and Coarse Aggregates
- ASTM D1557 Soil Compaction Characteristics in the Laboratory
- ASTM C39/C39M-21 Compressive Strength of Cylindrical Concrete Specimens
- ASTM E337-02 Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperature)
- ASTM E 328-13 Standard test method for Stress Relaxation for Materials and Structures
- ASTM E307-72 Standard Test Method for Normal Spectral Emittance at Elevated temperatures
- ASTM E303 – 93 Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
- ASTM E289 – 04 Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
- ASTM D6204-19a Measurement of Unvulcanized Rheological Properties of Rubber Using Rotorless Shear Rheometers
- ASTM D6203-06 Test for Thermal Stability of Way Lubricants
- ASTM D6191-97 Test to Measure Evolved Formaldehyde from Water Reducible Air-Dry Coatings
- ASTM D6188 Test for Viscosity of Cellulose by Cuprammonium Ball Fall
- ASTM E1875 Test for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio by Sonic Resonance
- ASTM E143 Test for Shear Modulus at Room Temperature
- ASTM E111 Test for Young’s Modulus, Tangent Modulus, and Chord Modulus
- ASTM E70 Determination of the pH of Aqueous Solutions with the Glass Electrode
- ASTM D6186 Oxidation Induction Time of Lubricating Oils
- ASTM D6184 Oil Separation from Lubricating Grease
- ASTM D6175 Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
- ASTM D6142 Analysis of Phenol by Capillary Gas Chromatography
- ASTM D6139 Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask
- ASTM D6138 Corrosion-Preventive Properties of Lubricating Greases
- ASTM E208 Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
- ASTM E220 Calibration of Thermocouples By Comparison Techniques
- ASTM E181-10 Test method for Detector Calibration and Analysis of Radionuclides
- ASTM E207 Thermal EMF Test of Single Thermo-element Materials
- ASTM E162 Surface Flammability of Materials Using a Radiant Heat Energy Source
- ASTM E132 Test Method for Poisson’s Ratio at Room Temperature
- ASTM E128 Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
- ASTM E126 Inspection, Calibration, and Verification of ASTM Hydrometers
- ASTM E119 Fire Tests of Building Construction and Materials
- ASTM E90 Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
- ASTM E84 Test Method for Surface Burning Characteristics
- ASTM E82 Test Method for Determining the Orientation of a Metal Crystal
- ASTM E81 Test Method for Preparing Quantitative Pole Figure
- ASTM E77 Inspection and Verification of Thermometers
- ASTM E69 Combustible Properties of Treated Wood by the Fire-Tube Apparatus
- ASTM D7912 Resistance of Finish to Heat Aging
- ASTM D7854 Standard Test Method for Carbon Black-Void Volume at Mean Pressure
- ASTM D7842/D7842M Holding Strength of Tack and Prong Fastener Attached Buttons
- ASTM D7811 Bow and Skew Using a Measuring Tool
- ASTM D7710 Determination of Volume and Density of Rigid Material
- ASTM D7513 The Capacity of Mixed Bed Ion Exchange Cartridges
- ASTM D7536 Dispersive X-ray Fluorescence Spectrometry
- ASTM D7490 Contact Angle Measurements
- ASTM D7760 Hydraulic Conductivity of Tires
- ASTM D7724 Standard Test Method for Carbon Black
- ASTM E2903 Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes
- ASTM E1815 Classification of Film Systems for Industrial Radiography
- ASTM E1695 Computed Tomography (CT) System Performance
- ASTM E1165 Focal Spots of Industrial X-Ray Tubes
- ASTM E803 L/D Ratio of Neutron Radiography Beams
- ASTM E2861 Beam Divergence and Alignment
- ASTM E2948 Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
- ASTM E2714 Creep-Fatigue Testing
- ASTM E2246 Strain gradient measurements of thin films using an Optical Interferometer
- ASTM E2245 Residual Strain Measurements of Reflecting Films using an Optical Interferometer
- ASTM E2244 Length Measurements of Reflecting Films using an Optical Interferometer
- ASTM F76 Determining Resistivity, Hall Coefficient, and Mobility
- ASTM E837 Determining Residual Stresses by the Hole Drilling Strain-Gage Method
- ASTM D494 Acetone Extraction of Phenolic Products
- ASTM E1935 Calibrating and Measuring CT Density
- ASTM D5452 Particulate Contamination in Aviation Fuels by Laboratory Filtration
- ASTM B311 Density of Powder Materials Containing Less Than Two Percent Porosity
- ASTM E203 Test Method for Water Using Volumetric Karl Fischer Titration
- ASTM D6055 Mechanical Handling of Unitized Loads and Shipping Cases and Crates
- ASTM D5151 Detection of Holes in Medical Gloves
- ASTM D1037 Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
- Test to determine the amount of Moisture in a Graphite Sample ASTM C562
- Category: Glass
- ASTM E578-07 Linearity of Fluorescence Measuring Systems
- ASTM D7681 Measuring Gradation of Glass Spheres using a Stream Digital Image Analyzer 
- ASTM E2141 Accelerated Aging of Electrochromic Devices in Sealed Glass Units
- ASTM C730 Standard Test for Knoop Indentation Hardness of Glass
- ASTM C146 Chemical Analysis of Glass Sand
- ASTM C225 Test Methods for Resistance of Glass Containers to Chemical Attack
- ASTM C429 Test for Sieve Analysis of Raw Materials for Glass Manufacture
- ASTM C813 Test for Hydrophobic Contamination on Glass by Contact Angle Measurement
- ASTM C1279 Test for Edge and Surface Stresses in Tempered Flat Glass
- ASTM C1901 Test for Measuring Optical Retardation in Flat Architectural Glass
- ASTM C149 Test for Thermal Shock Resistance of Glass Containers
- ASTM C147 Test for Internal Pressure Strength of Glass Containers
- Category: Insulating material
- Category: Iron and Steel Products
- ASTM E738-11 Aluminum in Iron Ores by EDTA Complexometric Titrimetry
- ASTM E572-13 Analysis of steel alloys by fluorescence spectrometry
- ASTM E507 – 13 Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
- ASTM D7093-13 Formability of thin-film organic coatings on Steel
- ASTM D7087-05a An Imaging Technique to Measure Rust Creepage at Scribe
- ASTM A572/A572M-21 High-Strength Low-Alloy Columbium-Vanadium Structural Steel
- ASTM A709/A709M-21 Specification for Structural Steel for Bridges
- ASTM A105/A105M-21 Carbon Steel Forgings for Piping Applications
- ASTM A269/A269M-15a Seamless and Welded Austenitic Stainless Steel Tubing
- ASTM A615/A615M-20 Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
- ASTM A123/A123M-17 Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
- ASTM A500/A500M-21a Cold-Formed Welded and Seamless Carbon Steel Structural Tubing
- ASTM A574M-12 Alloy Steel Socket-Head Cap Screws
- ASTM A182/A182M-21 Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
- ASTM A677-16 Specification for Nonoriented Electrical Steel, Fully Processed Types
- ASTM A683-16 Specification for Semiprocessed Non-Oriented Electrical Steel
- ASTM A370-21 Test Methods and Definitions for Mechanical Testing of Steel Products
- ASTM A1085/A1085M-15 Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
- ASTM A513/A513M-20a Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
- ASTM A276-10 Standard Specification for Stainless Steel Bars and Shapes
- ASTM A240 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and General Applications
- ASTM B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
- ASTM A967/A967M-17 Chemical Passivation Treatments for Stainless Steel Parts
- ASTM E415 Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
- ASTM A307– 21 Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI
- ASTM A53/53M-20 Standard Specification for Pipe
- ASTM A36 Method for Standard Specification for Carbon Structural Steel
- ASTM E314-10 Test method for Determination of Manganese in Iron Ores by Pyrophosphate (Potentiometric) and Periodate (Photometric) Techniques
- ASTM E322-12 Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry
- ASTM E279 – 97 Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test
- ASTM E278-01 Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry
- ASTM E1221 Test for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
- ASTM E45 Determining the Inclusion Content of Steel
- ASTM A1108 Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams
- ASTM A923 Detrimental Intermetallic Phase in Duplex Ferritic Stainless Steels
- ASTM E436 Drop-Weight Tear Tests
- ASTM A931 The tension of wire ropes and strands
- ASTM A1081 Evaluating Bond of Seven-Wire Steel Prestressing Strand
- ASTM A1061 Testing Multi-Wire Steel Prestressing Strand
- ASTM A1034 Testing Mechanical Splices for Steel Reinforcing Bars
- ASTM A1032 Hydrogen Embrittlement Resistance for Steel Wire
- ASTM A754 Metallic Coatings on Steel by X-Ray Fluorescence
- ASTM A428 Weight of coating on aluminum-coated iron or steel articles
- ASTM A90 Zinc Coating Mass Test
- ASTM A1084 Detecting Detrimental Phases in Lean Duplex Ferritic Stainless Steels
- ASTM A1058 Mechanical Testing of Steel Products-Metric
- ASTM F2877 Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum
- ASTM A991 Conducting Temperature Uniformity Surveys
- ASTM A255 Determining Hardenability of Steel
- ASTM E572 Analysis of Stainless and Alloy Steels by WDXRF
- ASTM E1086 Spark Atomic Emission Spectrometry for Steel Analysis
- ASTM A944 Bond strength of steel reinforcing bars
- ASTM A956 Leeb Hardness Testing of Steel Products
- Category: Medical Devices and Services
- ASTM F2413-18 Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear
- ASTM F2100-19 Specification for Performance of Materials Used in Medical Face Masks
- ASTM F3502-21 Standard Specification for Barrier Face Coverings
- ASTM D4236 Standard Practice for Labeling Art Materials for Chronic Health Hazards
- ASTM D6319 Standard Specification for Nitrile Examination Gloves for Medical Application
- ASTM D6370-99 Compositional Analysis of Rubber by Thermogravimetry (TGA)
- ASTM D6355 -07 Test for Human Repeat Insult Patch Testing of Medical Gloves
- ASTM D7907 Determination of Bactericidal Efficacy of Medical Gloves
- Medical Mask Bacterial filtration test ASTM F2101
- Category: Metals and Alloys Testing
- ASTM E1805-21 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry
- ASTM E1771-07 Determination of Copper in Anode and Blister Copper
- ASTM E1681-03 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
- ASTM E780–06 Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples, and Thermocouple Cable at Room Temperature
- ASTM E736-00 Cohesion/Adhesion of Fire-Resistive Materials
- ASTM E646 − 07 Tensile Strain-Hardening Exponents of Metal
- ASTM E643 − 09 Ball Punch Deformation of Metallic Sheet Material
- ASTM E604 – 83 Tear Testing of Metallic Materials
- ASTM E601-07a Measuring Electromotive Force Stability of Base-Metal Thermoelement Materials
- ASTM E581-10 Chemical Analysis of Manganese-Copper Alloys
- ASTM E536 – 08 Chemical Analysis of Zinc and Zinc Alloys
- ASTM E 517 – 00 Plastic Strain Ratio r for Sheet Metal
- ASTM E478 – 08 Standard Test Methods for Chemical Analysis of Copper Alloys
- ASTM D7035-10 Analysis of airborne particulate matter for metals and metalloids by ICP-AES
- ASTM A108-18 Steel Bar, Carbon and Alloy, Cold-Finished
- ASTM B221-21 Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
- ASTM B209 Method for Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
- ASTM E345-93 Standard test method for Tension Testing of Metallic Foil
- ASTM E340 -13 Test method for Macroetching Metals and Alloys
- ASTM D6208-97 Test for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
- ASTM E353 Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
- ASTM E2472 Test to Determine Resistance of Metals to Stable Crack Extension
- ASTM E1681 Test for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metals
- ASTM E1457-19e1 Test for Measurement of Creep Crack Growth Times in Metals
- ASTM E23 Test for Notched Bar Impact Testing of Metals
- ASTM E1304 Test for Plane-Strain (Chevron-Notch) Fracture Toughness of Metals
- ASTM E1820 Standard Test Method for Measurement of Fracture Toughness
- ASTM E399 Standard Test for Linear-Elastic Plane-Strain Fracture Toughness of Metals
- ASTM E2760-19e1 Standard Test Method for Creep-Fatigue Crack Growth Testing
- ASTM E647 Test for Measurement of Fatigue Crack Growth Rates
- ASTM E606 / E606M Test for Strain-Controlled Fatigue Testing
- ASTM E110 Test for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
- ASTM E384 Test for Microindentation Hardness of Materials
- ASTM E18 Test for Rockwell Hardness of Metallic materials
- ASTM E10 Test for Brinell Hardness of Metallic Materials
- ASTM E238 Test for Pin-Type Bearing Test of Metals
- ASTM E9 Compression Testing of Metallic Materials at Room Temperature
- ASTM E292 Conducting Time-for-Rupture Notch Tension Tests of Materials
- ASTM E1450 Test for Tension Testing of Structural Alloys in Liquid Helium
- ASTM E21 Test for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E8/E8M Test for Tension Testing of Metallic Materials
- ASTM E252 Thickness of Foil, Thin Sheet, and Film by Mass Measurement
- ASTM E251 Performance Characteristics of Metallic Bonded Resistance Strain Gauges
- ASTM E248 Determination of Manganese in Manganese Ores
- ASTM E247 Determination of Silica in Manganese Ores, Iron Ores, and Related Materials
- ASTM E246 Determination of Iron in Iron Ores and Related Materials
- ASTM E194 Method for Acid-Insoluble Content of Copper and Iron Powders
- ASTM E159 Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
- ASTM E139 Creep, Creep Rupture and, Stress Rupture Test of Metallic Materials
- ASTM E53 Determination of Copper in Unalloyed Copper by Gravimetry
- ASTM E37 Chemical Analysis of Pig Lead
- ASTM E34 Chemical Analysis of Aluminum and Aluminum-Base Alloys
- ASTM E23 Notched Bar Impact Testing of Metallic Materials
- ASTM E21 Elevated Temperature Tension Tests of Metallic Materials
- ASTM E18 Rockwell Hardness of Metallic Materials
- ASTM E10 Determining the Brinell hardness of Metallic Materials
- ASTM D7646 Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys
- ASTM D7639 Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
- ASTM D2674 Analysis of Sulfochromate Etch Solution
- ASTM A938 Torsion Testing of Wire
- ASTM E2971 Determining Boron-10 Areal Density
- ASTM E561 Determination of Resistance to Fracturing of Metallic Materials by R-curves
- ASTM E545 Determining the Image Quality
- ASTM E1004 Determining Electrical Conductivity
- ASTM E3039 Determination of Crack-Tip-Opening Angle
- ASTM E2899 Measurement of Initiation Toughness in Surface Cracks
- ASTM E1921 Determination of Reference Temperature for Ferritic Steels
- ASTM E3098 Mechanical Uniaxial Pre-strain and Thermal Recovery of Shape Memory Alloys
- ASTM E3097 Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
- ASTM B117 Salt Spray (Fog) Testing
- ASTM E2298 Instrumented Impact Testing of Metallic Materials
- ASTM E290 Bend Testing of Material for Ductility
- ASTM E18 Rockwell Hardness of Metallic Materials
- ASTM A1038 Portable Hardness Testing by UCI Method
- ASTM A833 Indentation Hardness of Metallic Materials
- Brinell Hardness of Metallic Materials ASTM E10
- Rockwell and Brinell Hardness of Metallic Materials ASTM E110
- ASTM E190 Guided Bend Test for Ductility of Welds
- ASTM E384 Microindentation Hardness of Materials
- ASTM E618 Machining Performance of Ferrous Metals
- ASTM G48 Pitting and Crevice Corrosion Resistance of Stainless Steels
- ASTM E112 Determination of Average Grain Size
- Small Punch Testing of Metallic Materials ASTM E3205
- Category: Packaging Material
- ASTM D6531 Tinting Strength of Aqueous Ink Systems
- ASTM D6834-02 Test method for determining Product Leakage from a Package with a Mechanical Pump Dispenser
- ASTM E1417/E1417M-21e1 Standard Practice for Liquid Penetrant Testing
- ASTM D3330/D3330M-04 Test for Peel Adhesion of Pressure-Sensitive Tape
- ASTM D7709 Measuring Water Vapor Transmission Rate of Pharmaceutical Bottles
- ASTM D7734/D7734M Open Time of Oxidative Printing Inks
- ASTM F3039 Detecting Leaks in Nonporous Packaging by Dye Penetration
- Seal Strength of Flexible Barrier Materials ASTM F88
- Category: Paints and Coatings
- ASTM E1709-09 Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at 0.2 Degree Observation Angle
- ASTM E1710-18 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
- ASTM D6442 Copper Release Rate From Antifouling Coatings
- ASTM D7133-21 Tristimulus CIELAB Color and Yellowness Index of Liquids
- ASTM D7027-13 Evaluation of Scratch Resistance of Polymeric Coatings and Plastics
- ASTM D6991-05 Measurement of Internal Stresses in Organic Coatings
- ASTM D6943-10 Immersion testing of industrial Protective coatings
- ASTM D6905-03 Impact Flexibility of Organic Coatings
- ASTM D6902-04 Test method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
- ASTM D6279-15 Test for Rub Abrasion Mar Resistance of High Gloss Coatings
- ASTM D7867 Measurement of Rotational Viscosity of liquid
- ASTM D7786 Determining Enamel Holdout
- ASTM D6133 Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Paints and Coatings
- ASTM D7836 Measurement of Yield Stress of Paints, Inks, and Related Liquid Materials
- ASTM D7835/D7835M Solvent Resistance of an Organic Coating using a Mechanical Rubbing Machine
- ASTM D7834 Standard Test Method for Filling Material Shedding of Paint Brushes
- ASTM D7804 Fiber Shedding of Paint Roller Covers
- ASTM D7791 Uniaxial Fatigue Properties of Plastics
- ASTM D7637 Determination of Glycerin Assay by Titration
- ASTM D7635/7635M Measurement of Thickness of Coatings over Fabric Reinforcement
- ASTM D7514 Ink Stain blocking of Architectural Paint Systems
- ASTM D7558 Colorimetric/Spectrophotometric Procedure
- ASTM D6625 Protective Properties of Polish Applied to a Painted Panel
- ASTM D522 Mandrel Bend Test of Attached Organic Coatings
- ASTM D3363 Film Hardness
- ASTM D2244 Calculating Color Differences
- ASTM G85 Modified Salt Spray (Fog) Testing
- ASTM D5894 Cyclic Salt Fog/UV Exposure of Painted Metal
- ASTM D1654 Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
- ASTM D1475 Density of Liquid Coatings, Inks
- ASTM D2794 Resistance of Organic Coatings
- ASTM D3273 Resistance to Growth of Mold
- ASTM D4541 Pull-Off Strength of Coatings
- ASTM D5895 Drying or Curing During Film Formation of Organic Coatings
- ASTM D7234 Pull-Off Adhesion Strength
- ASTM D1823 Apparent Viscosity of Plastisols and Organosols
- Measuring Adhesion by Tape Test ASTM D3359
- Nonvolatile Matter in Volatile Solvent by ASTM D1353
- Coating Flexibility of Prepainted Sheet ASTM D4145
- ASTM D3170 Chip Resistance
- Category: Polymers and Plastics
- ASTM D6499-12 Antigenic Protein in Natural Rubber and its Products
- ASTM D6484 Open-Hole Compressive Strength of Polymer Matrix
- ASTM D5988-18 Determining Aerobic Biodegradation of Plastic Materials in Soil
- ASTM D5526-18 Biodegradation of Plastic Under Accelerated Landfill Conditions
- ASTM D5511-18 Biodegradation of Plastic Under High-Solids Anaerobic Conditions
- ASTM D5338-15 Determining Aerobic Biodegradation of Plastic Materials
- ASTM D1042-12 Standard test for Changes of Plastics Caused by Exposure to Heat and Moisture
- ASTM D570 Water absorption of plastics
- ASTM D7253-16 Determination of Acidity as Acid Number for Polyether Polyols
- ASTM D7252-17 Determination of Monomer and Isomers in Isocyanates
- ASTM D7109-12 Shear Stability of Polymer Containing Fluids
- ASTM D7029-09 Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0°F (82.2°C)
- ASTM D7028-07 Glass Transition Temperature of Polymer Matrix Composites
- ASTM D6845-12 Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
- ASTM D6844-10 Test Method for silanes used in rubber formulations
- ASTM D6843-10 Method used for silanes and is used in rubber formulations
- ASTM D6979-18 Basicity in Polyols, Expressed as Percent Nitrogen
- ASTM D6226-21 Open Cell Content of Rigid Cellular Plastics
- ASTM C920-18 Specification for Elastomeric Joint Sealants
- ASTM D2000-18 Rubber Products in Automotive Applications
- ASTM D6290-98e1 Test for Color Determination of Plastic Pellets
- ASTM D6264-17 Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
- ASTM D6289-13 Test for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
- ASTM E1876 Test for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio by Impulse Excitation of Vibration
- ASTM D6159 Hydrocarbon Impurities in Ethylene by Gas Chromatography
- ASTM D6150 Estimating Processing Losses of Plastisols and Organosols Due to Volatility
- ASTM D6147 Determination of Force Decay in Vulcanized Rubber and Thermoplastic Elastomer in Compression
- ASTM D6137 Sulfuric Acid Resistance of Polymer Linings
- ASTM D6144 Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography
- ASTM D6143 Iron Content of Bisphenol A (4,4’–Isopropylidenediphenol)
- ASTM D5656 Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM D3658 Torque Strength of Ultraviolet Light-Cured Glass/Metal Adhesive Joints
- ASTM D3528 Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
- ASTM D3433 Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
- ASTM D3310 Determining Corrosivity of Adhesive Material
- ASTM D3167 Floating Roller Peel Resistance of Adhesives
- ASTM D3166 Fatigue Properties of Adhesives in Shear by Tension Loading
- ASTM D3165 Strength Properties of Adhesives in Shear by Tension Loading
- ASTM D2919 Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
- ASTM D7884 Determination of Carboxybenzaldehyde and Toluic Acid
- ASTM D7774 Flexural Fatigue Properties of Plastics
- ASTM D7723 Macro-Dispersion of Fillers in Compounds
- ASTM D7704 Determining total Aldehydes in Styrene Monomer
- ASTM D7705 Alkali Resistance of Fiber Reinforced Polymer used in Construction
- ASTM D7661 Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
- ASTM D7617/7617M Transverse Shear Strength of Fiber-Reinforced Polymer Matrix
- ASTM D7605 Thermoplastic Elastomers-Measurement of Rheological and Dynamic Properties
- ASTM D1062 Cleavage Strength of Metal-to-Metal Adhesive Bonds
- ASTM D2739 Volume Resistivity of Conductive Adhesive
- ASTM D2918 Durability Assessment of Adhesive Joints Stressed in Peel
- ASTM D1184 Flexural Strength of Adhesive Bonded Laminated Assemblies
- ASTM D1002 Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens
- ASTM D2557 Tensile-Shear Strength of Adhesives in the Subzero Temperature
- ASTM D2295 Strength Properties of Adhesives in Shear by Tension Loading
- ASTM D2294 Creep Properties of Adhesives in Shear by Tension Loading
- ASTM D2293 Creep Properties of Adhesives in Shear by Compression Loading
- ASTM D2095 Tensile Strength of Adhesives by Means of Bar and Rod Specimens
- ASTM D1876 Peel Resistance of Adhesives (T-Peel Test)
- ASTM D1781 Climbing Drum Peel for Adhesives
- ASTM D1304 Adhesives Relative to their use as Electrical Insulator
- ASTM D1489 Nonvolatile Content of Aqueous Adhesives
- ASTM D1146 Blocking Point of Potentially Adhesive Layers
- ASTM D1084 Test Methods for Viscosity of Adhesives
- ASTM D4883 Density of Polyethylene by the Ultrasound Technique
- ASTM D7191 Determination of Moisture in Plastics by Relative Humidity
- ASTM D6980 Determination of Moisture in Plastics by Loss in Weight
- ASTM D6953 Antioxidants and Erucamide Slip Additives in Polyethylene
- ASTM D6869 Coulometric and Volumetric Determination of Moisture in Plastics
- ASTM D6645 Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
- ASTM D6474 Molecular Weight Distribution and Molecular Weight Averages of Polyolefins
- ASTM D6247 Analysis of Elemental Content in Polyolefins
- ASTM D6042 Phenolic Antioxidants and Erucamide Slip Additives
- ASTM D5594 Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers
- ASTM D5508 Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins & Nitrile-Butadiene Rubber
- ASTM D5296 Molecular Weight Averages and Molecular Weight Distribution of Polystyrene
- ASTM D5507 Trace Organic Impurities in Monomer Grade Vinyl Chloride
- ASTM D5227 Measurement of Hexane Extractable Content of Polyolefins
- ASTM D5225 Measuring Solution Viscosity of Polymers with a Differential Viscometer
- ASTM D5017 Linear Low-Density Polyethylene (LLDPE) Composition
- ASTM D4754 Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
- ASTM D4603 Inherent Viscosity of Polyethylene Terephthalate (PET)
- ASTM A1108 Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams
- ASTM D950 Test Method for Impact Strength of Adhesive Bonds
- ASTM D903 Test for Peel or Stripping Strength of Adhesive Bonds
- ASTM D897 Test Method for Tensile Properties of Adhesive Bonds
- ASTM D6325 Test for Open Assembly Time of Carpet Mastic Adhesives
- ASTM D6004 Adhesive Shear Strength of Resilient Flooring and Carpet Adhesives
- ASTM D5574 Allowable Mechanical Properties of Wood-Bonding Adhesives for Structural Design
- ASTM D5215 Instrumental Test of Vinyl Flooring Staining by Adhesives
- ASTM D4502 Heat and Moisture Resistance of Wood-Adhesive Joints
- ASTM D4027 Shear Properties of Structural Adhesives by Modified Rail Test
- ASTM D3983 Measuring Adhesive Strength and Shear Modulus by Thick-Adherend Tensile Test
- ASTM D3931 Strength Test of Gap-Filling Adhesive Bonds in Shear by Compression Loading
- ASTM D3632 Accelerated Aging of Adhesive Joints by Oxygen-Pressure Test
- ASTM D1995 Methods for Multi-Modal Strength Testing of Autohesives
- ASTM D5868 Lap Shear Adhesion Test for Fiber Reinforced Plastic
- ASTM D5041 Fracture strength in Cleavage of Adhesives in Bonded Joints
- ASTM D4501 Adhesive Shear Strength between Rigid Substrates by Block-Shear Method
- ASTM D3164 Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints
- ASTM D5649 Torque Strength of Adhesives Used on Threaded Fasteners
- ASTM D3163 Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints
- ASTM D5648 Torque-Tension Relationship of Adhesives on Threaded Fasteners
- ASTM D4562 Adhesives Shear Strength Using Pin-and-Collar Specimen
- ASTM D4670 Determination of Suspended Matter in Polyols
- ASTM D4669 Determination of Specific Gravity of Polyols
- ASTM D4663 Determination of Hydrolyzable Chlorine of Isocyanates
- ASTM D4662 Determination of Acid and Alkaline Numbers of Polyols
- ASTM D4661 Determination of Total Chlorine in Isocyanates
- ASTM D4660 Determination of the Isomer Content of Toluene diisocyanate
- ASTM D4659 Determination of Specific Gravity of Isocyanates
- ASTM D4274 Determination of Hydroxyl Numbers of Polyols
- ASTM D4273 Determination of Primary Hydroxyl Content of Polyether Polyols
- ASTM D3769 Microcellular Urethanes High-Temperature Sag
- ASTM D3768 Microcellular Urethanes Flexural Recovery
- ASTM D3576-20 The cell size of Rigid Plastics
- ASTM D3575 Flexible Cellular Materials Made from Olefin Polymers
- ASTM D3574 Flexible Cellular Materials – Slab, Bonded, and Molded Urethane Foams
- ASTM D3489 Microcellular Urethane Materials
- ASTM D2842 Water Absorption of Rigid Cellular Plastics
- ASTM D2126 Response of Rigid Cellular Plastics to Thermal and Humid aging
- ASTM D1623 Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
- ASTM D1622 Apparent Density of Rigid Cellular Plastics
- ASTM D1621 Compressive Properties of Rigid Cellular Plastics
- ASTM D8280 Determination of the Blooming of Brominated Flame Retardants by Ion Chromatography
- ASTM D8133 Determination of Low-Level Phthalates in PVC Plastics by Solvent Extraction
- ASTM D7823 Determination of Low-Level Phthalates in PVC Plastics by Thermal Desorption
- ASTM D3749 Vinyl Chloride Monomer determination in PVC by Gas Chromatographic Headspace technique
- ASTM D1921 Particle Size (Sieve Analysis) of Plastic Materials
- ASTM A938 Torsion Testing of Wire
- ASTM A923 Detrimental Intermetallic Phase in Duplex Ferritic Stainless Steels
- ASTM E2903 Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes
- ASTM D746 Brittleness Temperature
- ASTM D4443 Residual Vinyl Chloride Monomer Content
- ASTM D4275 Butylated Hydroxy Toluene in Polymers of Ethylene and Ethylene–Vinyl Acetate
- ASTM D4218 Determination of Carbon Black Content in Polyethylene Compounds
- ASTM D4001 Average Molecular Weight of Polymers By Light Scattering
- ASTM E1922 Translaminar Fracture Toughness of Polymers
- ASTM D3591 Logarithmic Viscosity Number of Poly Vinyl Chloride (PVC)
- ASTM D3124 Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
- ASTM D1895 Apparent Density, Bulk Factor, and Pour ability of Plastic Materials
- ASTM D1601 Dilute Solution Viscosity of Ethylene Polymers
- ASTM D1505 The density of Plastics by the Density-Gradient Technique
- ASTM D3045 Heat Aging Test of Plastics Without Load
- ASTM D3389 Coated Fabrics Abrasion Resistance
- ASTM D1822 Tensile-Impact Energy test
- ASTM G21 Resistance of Synthetic Polymeric Materials to Fungi
- ASTM D5511 Anaerobic Biodegradation of Plastic Materials
- ASTM D5338 Determining Aerobic Biodegradation
- ASTM D1494 Diffuse Light Transmission Factor
- ASTM D2290 Apparent Hoop Tensile Strength
- ASTM D1598 Time-to-Failure of Plastic Pipes
- ASTM D5528 Mode I Interlaminar Fracture Toughness
- ASTM D6742 Filled-Hole Tension and Compression Testing
- ASTM D7291 Through-Thickness Flatwise Tensile Strength and Elastic Modulus
- ASTM D1415 Rubber Hardness Test
- ASTM D454 Test for Rubber Deterioration
- ASTM D573 Test for Rubber Deterioration in an Air Oven
- ASTM G65 Abrasion Test Using the Dry Sand/Rubber Wheel Apparatus
- ASTM C679 Test for Tack-Free Time of Elastomeric Sealants
- Determination of the Mode II Interlaminar Fracture Toughness of Polymer Composites ASTM D7905
- Specific Heat Capacity by Differential Scanning Calorimetry ASTM E1269
- ASTM E606 Strain-Controlled Fatigue Test
- Combustibility of Building Materials ASTM E2652
- Wear Testing of Polymeric Materials by ASTM F732
- Tension & Elongation of Elastic Fabric by ASTM D4964
- Yellowness Index (YI) ASTM E313
- Infrared Spectroscopy Techniques ASTM E1252, ASTM E168
- ASTM F1249 Water Vapor Transmission Rate
- ASTM F1921 Hot Seal Strength
- Antimicrobial Efficacy Testing ASTM E2180
- Linear Thermal Expansion of solids ASTM E228
- Test for Charpy Impact Resistance of Notched Specimens of Plastics ASTM D6110
- Shear Properties of Composite Materials by V-notched Rail Shear Method ASTM D7078
- Test to Determine Ignition Temperature of Plastics ASTM D1929
- Analysis of Aqueous Extractable Protein in Elastomers ASTM D5712
- Antigenic Protein in Hevea Natural Rubber ASTM D6499
- ASTM E96 Water Vapor Transmission
- ASTM D2584, D5630, ISO 3451 Ash Content
- ASTM D1623 Tensile and Tensile Adhesion Properties
- ASTM D5946 Contact Angle Measurements
- ASTM D7264 Flexural Properties of Composites
- Flexural Test Composites Four-Point Bending ASTM D6272
- ASTM D7766 Damage Resistance Test of Sandwich Constructions
- ASTM E1131, ISO 11358 Thermogravimetric Analysis (TGA)
- ASTM E831, ASTM D696 Coefficient of Linear Thermal Expansion
- ASTM D3835 Capillary Rheometry Shear Sweep, Thermal Stability
- ASTM D3846 Shear Strength of Reinforced Plastics
- ASTM D3985 Oxygen Transmission Rate (OTR)
- Dynamic Mechanical Analysis ASTM D4065, D4440, D5279
- ASTM D4226, D5420 Gardner Impact Test
- ASTM G154, ASTM D4329, ASTM D4587, ISO 4892 QUV Accelerated Weathering
- ASTM D5766 Tensile Strength (Open Hole)
- Izod Impact (Unnotched) by ASTM D4812, ISO 180
- V-Notched Shear by ASTM D5379
- ASTM D7249Sandwich Flexural Stiffness
- ASTM D638 Plastics Tensile Testing
- ASTM D648, ISO 75 Heat Deflection Temperature
- ASTM D695, ISO 604 Compression Properties
- ASTM D732 Shear Strength Test
- ASTM D790, ISO 178 Flexural Properties Testing
- ASTM D1002, ASTM D5868, ASTM D3163 for Lap Shear Tests
- ASTM D1693 Environmental Stress Cracking Test of Ethylene Plastics
- ASTM D5023 Dynamic Mechanical Testing of Plastics
- ASTM D3418, ASTM E1356, ISO 11357 Differential Scanning Calorimetry
- ASTM D3763, ASTM D7192, ISO 6603, ISO 7765 Multiaxial Impact Test
- ASTM D785, ISO 2039 Rockwell Hardness
- ASTM D789, D4878 Relative Viscosity of Polyamide
- ASTM D792, ISO 1183 Specific Gravity and density
- ASTM D882 Tensile Properties (Sheet)
- ASTM D4459, ASTM D2565, ASTM G155 Xenon-Arc Accelerated Exposure (XAAE)
- ASTM D3039 Tensile Testing of Polymer Matrix Composite Materials
- ASTM D1822 Tensile Impact Test for Plastics
- ASTM D4093 Residual Strain Measurements in Plastics
- ASTM D6344 Transport Packaging Concentrated Impact
- Test Guide for Oxo-biodegradable Plastics ASTM D6954
- ASTM D3164 Shear by Tension Loading
- ASTM D3410 Compression of Composites
- ASTM D3518 Shear Response
- ASTM D1003 Haze and Transmittance
- ASTM D955 Shrinkage From Mold Dimensions
- ASTM D1004 Tear Resistance
- ASTM D1044 (Haze), ASTM D4060 (Weight Loss) Taber Abrasion
- ASTM D1204 Dimensional Stability
- ASTM D1238, ISO 1133 Melt Flow Rate
- ASTM D1525 Vicat Softening Point of Plastics
- ASTM D1708 Micro Tensile
- ASTM D1603 Carbon Black
- ASTM D1709, ISO 7765 Drop Dart
- ASTM D1894 Coefficient of Friction
- ASTM D1922 Elmendorf Tear Test
- ASTM D2240 Shore Hardness
- ASTM D2344 Short Beam Shear Testing
- ASTM D3012, GM9059P Thermal-Oxidative Stability
- ASTM D2583 Barcol Hardness Test
- ASTM D2584 Ignition Loss of Cured Reinforced Resins
- ASTM D2734 Void Content of Reinforced Plastics
- ASTM C271 Density of Sandwich Core Materials
- ASTM D543 Chemical Compatibility
- ASTM D638, ISO 527 Poisson’s Ratio
- ASTM D570 Water Absorption
- ASTM D635, ISO 3795 Flammability
- ASTM C272 Water Absorption of Core Materials
- ASTM C273 Shear Test (Core) Tension or Compression
- ASTM D149 Dielectric Strength, IEC 60243
- ASTM D256 Izod Impact (Notched), ISO 180
- ASTM D412 Tensile Set (Elastomers)
- ASTM C297 Tensile Strength of Sandwich Constructions
- ASTM C365 Flatwise Compressive Properties
- ASTM C393 Sandwich Construction Core Shear Properties
- ASTM D150 Dielectric Constant and Dissipation Factor
- ASTM D257 Surface Resistivity, Volume Resistivity
- ASTM D2863 Oxygen Index
- ASTM D395B Compression Set Testing
- ASTM D471 Rubber Property and Liquids Effect
- ASTM D2457, ASTM D523 Specular Gloss
- ASTM D542 Transparent Organic Plastic Refractive Index
- Category: Metrology Testing Service
- Detection of Flow Accelerated Corrosion
- Quadrupole Ion Trap (QTrap)
- Transmission Electron Microscope (TEM) Data Analysis
- Liquid Chromatography with Tandem Mass Spectrometry (LC-MS/MS)
- Ultraviolet/Visible/Near Infrared Spectroscopy (UV/VIS/NIR) Testing
- Spectrophotometry Testing Services
- Gas Chromatography (GC) Analysis Lab
- Optical Emission Spectroscopy (OES) Testing Laboratory
- Fourier Transform Infrared Spectroscopy (FTIR) Analysis Testing Lab
- Gas Chromatography (GC) Analysis Services
- Scanning Acoustic Tomography (SAT)
- Battery Testing Solutions in Manufacturing and Production
- Thermal Shock Test
- ISO 178
- Rheometry For Viscoelastic Properties
- Thermomechanical Analysis (TMA)
- Spectral Ellipsometry (SE)
- Specular X-ray Reflectivity (XRR)
- Viscosity
- Total Reflection X-ray Fluorescence (TXRF)
- Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS)
- Thin-Layer Chromatography (TLC)
- Titrimetry
- Thermogravimetry/Evolved Gas Analysis (TG-EGA)
- Tensiometry
- Real Time X-ray (RTX)
- Scanning Electron Microscopy – Cathodoluminescence (SEM-CL)
- Rheology (Rheology)
- Residual Gas Analysis (RGA)
- Refractometry (Refractometry)
- Raman Spectrometry (Raman)
- Pyrolysis Gas Chromatography/Mass Spectrometry (Pyro-GC-MS)
- Nuclear Reaction Analysis (NRA)
- Nuclear Magnetic Resonance Spectroscopy (NMR)
- Nanoindentation for Nano-mechanical Testing (Nanoindentation)
- Matrix-Assisted Laser Desorption/Ionization (MALDI)
- Laser Induced Breakdown Spectroscopy (LIBS)
- Laser Diffractometry (Laser Diffraction)
- Air-Jet Sieve for Particle Size Analysis
- Atom Probe Tomography (APT)
- Auger Electron Spectroscopy (AES)
- Gas Adsorption for Surface Area (BET) determination and Pore Size Analysis (BJH)
- Colorimetry
- Cryogenic Transmission Electron Microscopy (Cryo-TEM)
- Differential Hall Effect Metrology (DHEM)
- Dilatometry
- Dynamic Mechanical Analysis (DMA)
- Destructive Physical Analysis (DPA)
- Dual Beam – Focused Ion Beam (Dual Beam – FIB)
- Electron Beam Induced Current (EBIC)
- Electron Backscatter Diffraction (EBSD)
- Electron Energy Loss Spectroscopy (EELS)
- Electrochemical Analysis
- Electrothermal Vaporization ICP Optical Emission Spectroscopy (ETV-ICP-OES)
- Ellipsometry
- Emissivity
- Gas Chromatography-Mass Spectrometry (GC-MS)
- Gas Chromatography–Tandem Mass Spectrometry (GC-MS-MS)
- Glow Discharge Mass Spectrometry (GDMS)
- Gel Permeation Chromatography (GPC)
- Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS)
- Hydrogen Forward Scattering Spectrometry (HFS)
- High Performance Liquid Chromatography (HPLC)
- High-Resolution Mass Spectrometry (HRMS)
- Ion Chromatography (IC)
- Instrumental Gas Analysis (IGA)
- Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES)
- Gas Chromatography Mass Spectroscopy – GCMS
- Atomic Force Microscopy – AFM
- Differential Scanning Calorimetry – DSC
- Inductively Coupled Plasma Mass Spectrometry – ICP-MS
- Liquid Chromatography-Mass Spectroscopy – LC-MS
- Particle Induced X Ray Emission – PIXE
- Optical Profilometry
- Energy Dispersive X-ray Spectroscopy (EDS)
- Fourier Transform Infrared Spectroscopy – FTIR
- X-Ray Diffraction Analysis – XRD
- X-Ray Fluorescence Spectroscopy – XRF
- X-ray Photoelectron Spectroscopy – XPS
- Rutherford Backscattering Spectrometry – RBS
- Scanning Acoustic Microscopy
- Scanning Electron Microscopy (SEM) Analysis Services
- Secondary Ion Mass Spectroscopy – SIMS
- Ultraviolet (UV)-Visible Spectroscopy
- Transmission Electron Microscopy – TEM
- Category: Product Testing
- Chiral Analysis of Optical Isomers
- Detection of Flow Accelerated Corrosion
- Advanced Lighting Controls Testing
- Horizontal Compression Integrity Testing
- Forklift Handling Testing
- Flexible Package Integrity Testing
- Drop Testing (Package Testing)
- Compression Package Testing
- Package Conditioning
- Cold Chain Package Testing
- Burst Strength Package Testing
- Bubble Leak Package Testing
- Bridge Impact Testing (Package Testing)
- Accelerated Aging Package Testing
- Altitude Package Testing
- Heat Flow Meter Testing
- Perfluorooctanoic Acid (PFOA) and Perfluorooctane Sulfonate (PFOS) Analysis
- Design Failure Mode and Effects Analysis (DFMEA)
- Elemental or CHN Analysis
- Automotive Testing Service
- Electrical Safety Testing
- Apparel/Cloth Testing
- Failure Analysis in Semiconductors
- Laboratory Tests to Determine Ingredients in Soap
- Reliability Testing and Analysis
- Food Toxicology Testing
- Printed Circuit Board (PCB) Analysis
- Cytotoxicity Testing
- FATIGUE TESTING METHODS
- Bio-compatibility Testing
- Good Manufacturing Practice (GMP) Certification
- Copper Accelerated Salt Spray (CASS) Test
- Bio-burden Testing
- Shock and Vibration Testing Services
- Heat Aging Testing Services
- Temperature, Humidity, Bias (THB) Testing
- Analysis of Hydrochloric Acid
- DIN 75220: Standard for Aging of Automotive Components in Solar Simulation
- Accelerated Aging Test for Medical Devices
- Accelerated Corrosion Testing Services
- Hail Impact Testing for Solar Panels
- Thermal Resistance Testing Services
- Environmental Vibration Testing
- Thermal Expansion Testing
- Polymer Hardness Testing
- Abrasion Testing Services
- Thermal Shock Resistance Test Method
- Liquid to Liquid Thermal Shock Testing
- Air to Air Thermal Shock Testing
- BHAST (Biased Highly Accelerated Stress Tests)
- Accelerated Shelf Life Testing (ASLT)
- Battery Charge-Discharge Testing
- Microbiological Testing of Packing
- Thermal Shock Testing
- Accelerated Aging
- Hail Impact Testing
- Altitude Testing and Simulation Services
- Combined Temperature and Vibration Testing
- Highly Accelerated Life Testing HALT and Highly Accelerated Stress Screening HASS
- Highly Accelerated Stress Test – HAST
- Solar Radiation Testing
- Humidity Testing
- Electrical Enclosure Rating Testing
- Accelerated Weathering Testing
- Ingress Protection (IP) Testing
- Salt Spray – Salt Fog Corrosion Testing
- Sand and Dust Testing
- Temperature Variation Testing
- Vibration Testing
- Waterproofness Testing
- Fluid Susceptibility and Contamination Testing
